Date: Tue, 28 Sep 1999 20:48:52 -0400 From: Joseph Jacobson <jacobson@pobox.com> To: freebsd-stable@freebsd.org Subject: frequent crashes w/ 3.3 Message-ID: <37F161F4.3AEA6321@pobox.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------4187DCF96595E57AC6CA7A0E Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Generally crashes under X after sitting idle for hours. If there is more information I should/can provide, please let me know. -- Joseph Jacobson <jacobson@pobox.com> Finger for PGP http://www.pobox.com/~jacobson #include <std/disclaimer.h> Two men walk into a bar. The third one ducks. --------------4187DCF96595E57AC6CA7A0E Content-Type: text/plain; charset=iso-8859-1; name="typescript" Content-Transfer-Encoding: 8bit Content-Disposition: inline; filename="typescript" Script started on Tue Sep 28 20:14:39 1999 bash-2.03# ls -l /usr/sup/src-all/checkouts.cvs\:RELENG_3 -rw-r--r-- 1 root bin 3808821 Sep 23 19:48 /usr/sup/src-all/checkouts.cvs:RELENG_3 bash-2.03# gdb -k GNU gdb 4.18 Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-freebsd". (kgdb) exec-file kernel.2 (kgdb) symbol-file /kernel Reading symbols from /kernel...done. (kgdb) core-file vmcore.2 IdlePTD 3272704 initial pcb at 298d7c panicstr: page fault panic messages: --- Fatal trap 12: page fault while in kernel mode fault virtual address = 0x0 fault code = supervisor read, page not present instruction pointer = 0x8:0xc020926f stack pointer = 0x10:0xc3440e18 frame pointer = 0x10:0xc3440e1c code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 2810 (sh) interrupt mask = trap number = 12 panic: page fault syncing disks... 13 13 8 3 done dumping to dev 20409, offset 458880 dump 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 --- #0 boot (howto=256) at ../../kern/kern_shutdown.c:285 285 dumppcb.pcb_cr3 = rcr3(); (kgdb) bt #0 boot (howto=256) at ../../kern/kern_shutdown.c:285 #1 0xc015b270 in at_shutdown ( function=0xc02719ba <__set_sysinit_set_sym_memdev_sys_init+1050>, arg=0xc339ae40, queue=-1019611520) at ../../kern/kern_shutdown.c:446 #2 0xc0234ed5 in trap_fatal (frame=0xc3440ddc, eva=0) at ../../i386/i386/trap.c:942 #3 0xc0234bb3 in trap_pfault (frame=0xc3440ddc, usermode=0, eva=0) at ../../i386/i386/trap.c:835 #4 0xc023482a in trap (frame={tf_es = 16, tf_ds = 16, tf_edi = -1019154052, tf_esi = -1019154048, tf_ebp = -1018950116, tf_isp = -1018950140, tf_ebx = -1018756004, tf_edx = 0, tf_ecx = -1070982672, tf_eax = 232, tf_trapno = 12, tf_err = 0, tf_eip = -1071607185, tf_cs = 8, tf_eflags = 66199, tf_esp = -1018756004, tf_ss = -1018950088}) at ../../i386/i386/trap.c:437 #5 0xc020926f in vm_object_allocate (type=OBJT_DEFAULT, size=2) at ../../vm/vm_zone.h:87 #6 0xc0209c34 in vm_object_shadow (object=0xc340f17c, offset=0xc340f180, length=2) at ../../vm/vm_object.c:867 #7 0xc020785e in vm_map_lookup (var_map=0xc3440efc, vaddr=134819840, fault_typea=3 '\003', out_entry=0xc3440f00, object=0xc3440ef4, pindex=0xc3440ef8, out_prot=0xc3440ee3 "Ã", wired=0xc3440edc) at ../../vm/vm_map.c:2645 #8 0xc0203007 in vm_fault (map=0xc339f680, vaddr=134819840, fault_type=3 '\003', fault_flags=8) at ../../vm/vm_fault.c:198 #9 0xc0234b46 in trap_pfault (frame=0xc3440fac, usermode=1, eva=134821148) at ../../i386/i386/trap.c:816 #10 0xc02346c6 in trap (frame={tf_es = 39, tf_ds = 39, tf_edi = 134881280, tf_esi = -1, tf_ebp = -1077945276, tf_isp = -1018949676, tf_ebx = 134877184, tf_edx = 0, tf_ecx = 134859828, tf_eax = 134859708, tf_trapno = 12, tf_err = 7, tf_eip = 134543809, tf_cs = 31, tf_eflags = 66118, tf_esp = -1077945280, tf_ss = 39}) at ../../i386/i386/trap.c:358 #11 0x804f9c1 in ?? () #12 0x804fa31 in ?? () #13 0x804fa48 in ?? () #14 0x80504b2 in ?? () #15 0x804b2dd in ?? () #16 0x804a879 in ?? () #17 0x804a639 in ?? () #18 0x80512f7 in ?? () #19 0x80480e9 in ?? () (kgdb) quit bash-2.03# dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #0: Mon Sep 27 22:14:03 EDT 1999 root@home.bitshift.com:/usr/src/sys/compile/JOE Timecounter "i8254" frequency 1193618 Hz Timecounter "TSC" frequency 200527842 Hz CPU: Pentium/P55C (200.53-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 33488896 (32704K bytes) avail memory = 29560832 (28868K bytes) Preloaded elf kernel "kernel" at 0xc030d000. Probing for devices on PCI bus 0: chip0: <Intel 82439TX System Controller (MTXC)> rev 0x01 on pci0.0.0 chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 uhci0: <Intel 82371AB/EB USB Host Controller> rev 0x01 int d irq 10 on pci0.7.2 chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 xl0: <3Com 3c905-TX Fast Etherlink XL> rev 0x00 int a irq 11 on pci0.17.0 xl0: Ethernet address: 00:60:08:39:89:3f xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps) vga0: <Number Nine model 493d graphics accelerator> rev 0x00 int a irq 11 on pci0.18.0 es1: <AudioPCI ES1370> rev 0x00 int a irq 11 on pci0.19.0 pcm1: using I/O space register mapping at 0xef00 ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 10 on pci0.20.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs Probing for PnP devices: CSN 1 Vendor ID: USR1001 [0x01107256] Serial 0x66292220 Comp ID: @@@0000 [0x00000000] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A pcm0 not found pca0 on motherboard pca0: PC speaker audio driver fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface usb0: <Intel 82371AB/EB USB Host Controller> uhub0 at usb0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Intel Pentium detected, installing workaround for F00F bug IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, unlimited logging Waiting 2 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 4 lun 0 sa0: <HP HP35480A 1009> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST34573W 6244> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST32155W 0362> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C) da2 at ahc0 bus 0 target 2 lun 0 da2: <SEAGATE ST32155W 0596> Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da2: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C) changing root device to da1s1a WARNING: / was not properly dismounted cd0 at ahc0 bus 0 target 5 lun 0 cd0: <PLEXTOR CD-ROM PX-12TS 1.02> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: cd present [250570 x 2048 byte records] bash-2.03# cat /usr/src/sys/i386/conf/JOE # machine "i386" ident JOE maxusers 32 cpu "I586_CPU" # aka Pentium(tm) config kernel root on da1 options INCLUDE_CONFIG_FILE # Include this file in kernel options "CPU_FASTER_5X86_FPU" options "CPU_SUSP_HLT" #options MATH_EMULATE #Support for x87 emulation options "COMPAT_43" # 4.3BSD system calls options USER_LDT # for WINE options SYSVSHM options SYSVSEM options SYSVMSG options "MD5" # for doscmd options "VM86" #options DDB #kernel debugger #options DDB_UNATTENDED #options DIAGNOSTIC options KTRACE #kernel tracing options PERFMON options UCONSOLE options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor # NETWORKING OPTIONS options INET #Internet communications protocols pseudo-device loop #Network loopback device pseudo-device ether #Generic Ethernet pseudo-device bpfilter 1 #Berkeley packet filter pseudo-device tun 1 #Tunnel driver (user process ppp(8)) pseudo-device ppp 1 #Point-to-point protocol options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpfilter) # FIREWALL options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print info about dropped packets options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default #options IPFIREWALL_FORWARD #enable transparent proxy support #options IPDIVERT #divert sockets #options IPFILTER #kernel ipfilter support #options IPFILTER_LOG #ipfilter logging #options IPFILTER_LKM #kernel support for ip_fil.o LKM options "ICMP_BANDLIM" # FILESYSTEM OPTIONS options FFS #Fast filesystem options MFS #Memory File System options NFS #Network File System options "CD9660" #ISO 9660 filesystem options MSDOSFS #MS DOS File System options PROCFS #Process filesystem options FFS_ROOT #FFS usable as root device options MFS_ROOT #MFS usable as root device options NFS_ROOT #NFS usable as root device options "CD9660_ROOT" #CD-ROM usable as root device # SCSI DEVICES controller scbus0 #base SCSI code device da0 #SCSI direct access devices (aka disks) device sa0 #SCSI tapes device cd0 #SCSI CD-ROMs device pass0 #CAM passthrough driver options SCSI_REPORT_GEOMETRY # MISCELLANEOUS DEVICES AND OPTIONS pseudo-device pty 16 #Pseudo ttys - can go as high as 256 pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device gzip #Exec gzipped a.out's #pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. #pseudo-device ccd 4 #Concatenated disk driver # pseudo-device vinum #Vinum concat/mirror/raid driver options "MSGBUF_SIZE=40960" # HARDWARE DEVICE CONFIGURATION controller isa0 controller pnp0 controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts #options VGA_ALT_SEQACCESS options VESA # needs VM86 defined too!! pseudo-device splash device sc0 at isa? tty options SC_HISTORY_SIZE=200 # number of history buffer lines #options SC_DISABLE_REBOOT # disable reboot key sequence device npx0 at isa? port IO_NPX irq 13 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 device sio0 at isa? port "IO_COM1" tty flags 0x10 irq 4 device pcm0 at isa? port ? tty irq 10 drq 1 flags 0x0 device pca0 at isa? port "IO_TIMER1" tty #device joy0 at isa? port IO_GAME controller pci0 device ahc0 device xl0 # SMB bus controller smbus0 device smb0 at smbus? # I2C Bus controller iicbus0 controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? device iicsmb0 at iicbus? # Parallel-Port Bus controller ppbus0 controller vpo0 at ppbus? device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? # # More undocumented options for linting. # options CLK_CALIBRATION_LOOP options "CLK_USE_I8254_CALIBRATION" options CLK_USE_TSC_CALIBRATION options NO_LKM options COMPAT_LINUX options "EXT2FS" options SHOW_BUSYBUFS # List buffers that prevent root unmount # USB controller uhci0 controller ohci0 controller usb0 device ugen0 # Generic USB device driver device uhid0 # Human Interface Device (anything w/ buttons and dials) device ukbd0 # USB keyboard device ulpt0 # USB printer device ums0 # USB mouse bash-2.03# exit Script done on Tue Sep 28 20:15:26 1999 --------------4187DCF96595E57AC6CA7A0E-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37F161F4.3AEA6321>