Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 3 Jun 2003 11:13:31 +0200
From:      Riccardo Torrini <riccardo@torrini.org>
To:        freebsd-hackers@FreeBSD.org, freebsd-hardware@FreeBSD.org
Subject:   Fwd: Problems with usb HID device on freebsd
Message-ID:  <20030603091331.GA6867@trudy.torrini.home>

next in thread | raw e-mail | index | archive | help
I sent this message also to FreeBSD USB maintainer and to NetBSD
original author without luck, can you point me to the right direction?

TIA,
Riccardo.

PS: please Cc: me, I follow only current@


----- Forwarded message from myself <riccardo@torrini.org> -----

I'm trying to interface my new APC (RS 500) with FreeBSD 4.8-STABLE but
I found some (a lot of?) problems:

# usbdevs -v -d
Controller /dev/usb0:
addr 1: self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
  uhub0
 port 1 powered
 port 2 addr 2: low speed, self powered, config 1, \
	Back-UPS RS 500 FW:30.j2.I USB FW:j2(0x0002), \
	American Power Conversion(0x051d), rev 0.06


Looking into source I found that prototyping:

-----8<-----[ /usr/src/lib/libusbhid/libusbhid.h ]-----8<-----
[...]
int hid_report_size(report_desc_t d, unsigned int id, enum hid_kind k);
[...]

is different from man page (2nd/3rd parameter swapped):
-----8<-----[ man hid_report_size ]-----8<-----
[...]
    int
    hid_report_size(report_desc_t d, unsigned int id, hid_kind_t k);
[...]

I think man page is wrong, but this is not a problem.

After playing with usbhidctl I found that my APC use 0xff84, 0xff85 and
0xff86 instead of 0x84, 0x85 and 0x86 as it would so I created a custom
file with the contents of /usr/share/misc/usb_hid_usage and with a copy
of pages 132/133 to 0xff84/0xff85 and now it decode pages/usages.

Now I'm at a dead end, usbhidctl say:
	device does not support immediate mode, only changes reported.
but interrogating device with -a and/or -l show me only zeros.

If you need my config/boot.log feel free to download them from:
	ftp://ftp.torrini.org/pub/FreeBSD/APC-hacking/

What else can I do (apart from changing UPS)?

I hope you can point me to the right direction (docs or ML)...

TIA

PS: can you change .../usb_hid_usage and use hex notation, instead of
    decimal one, also for pages because usbhidctl report them as hex?


-- 
Riccardo. ( http://www.GUFI.org/~vic/ )



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030603091331.GA6867>