Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 17 Nov 2003 16:00:51 +0100
From:      tom <tom@www.paniert.net>
To:        Joe Marcus Clarke <marcus@marcuscom.com>
Cc:        ports <ports@freebsd.org>
Subject:   Re: gnome2 port
Message-ID:  <1069081251.3fb8e2a382f9c@www.paniert.net>
In-Reply-To: <1069023463.3752.30.camel@shumai.marcuscom.com>
References:  <1069021442.3fb7f902194ed@www.paniert.net> <1069023463.3752.30.camel@shumai.marcuscom.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Zitat von Joe Marcus Clarke <marcus@marcuscom.com>:

> On Sun, 2003-11-16 at 17:24, tom wrote:
> > hi,
> > when i try to do a "make install" of the gnome2 superport
> > (/usr/ports/x11/gnome2) the install breaks in the gnome-panel dir: 
> > 
> > ---snip----
> > cc -DHAVE_CONFIG_H -I. -I. -I.. -I. -I. -I../gnome-panel -DPANEL_DEBUG
> > -DGNOMELOCALEDIR=\""/usr/X11R6/share/locale"\"
> > -DGLADEDIR=\""/usr/X11R6/share/gnome/panel"\" -DG_DISABLE_DEPRECATED
> > -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED
> > -DGDK_PIXBUF_DISABLE_DEPRECATED -DGNOME_DISABLE_DEPRECATED 
> > -DPREFIX=\""/usr/X11R6"\" -DSYSCONFDIR=\""/usr/X11R6/etc"\"
> > -DLIBDIR=\""/usr/X11R6/lib"\" -DDATADIR=\""/usr/X11R6/share/gnome"\" 
> > -DGTK_MENU_INTERNALS -DORBIT2=1 -D_THREAD_SAFE
> -I/usr/local/include/orbit-2.0
> > -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
> > -I/usr/local/include/atk-1.0 -I/usr/local/include/libbonobo-2.0
> > -I/usr/local/include/bonobo-activation-2.0 -I/usr/local/include/libart-2.0
> > -I/usr/local/include/libxml2 -I/usr/local/include
> -I/usr/X11R6/include/gtk-2.0
> > -I/usr/X11R6/lib/gtk-2.0/include -I/usr/X11R6/include/pango-1.0
> > -I/usr/X11R6/include -I/usr/local/include/freetype2
> > -I/usr/X11R6/include/libgnome-2.0 -I/usr/X11R6/include/gconf/2
> > -I/usr/X11R6/include/gnome-vfs-2.0 -I/usr/X11R6/lib/gnome-vfs-2.0/include
> > -I/usr/X11R6/include/libgnomeui-2.0
> -I/usr/X11R6/include/libgnomecanvas-2.0
> > -I/usr/X11R6/include/libbonoboui-2.0
> -I/usr/X11R6/include/gnome-desktop-2.0
> > -I/usr/X11R6/include/startup-notification-1.0
> > -I/usr/X11R6/include/gnome-vfs-module-2.0 -I/usr/X11R6/include/libglade-2.0
>  
> > -DORBIT2=1 -D_THREAD_SAFE -I/usr/local/include/glib-2.0
> > -I/usr/local/lib/glib-2.0/include -I/usr/local/include/atk-1.0
> > -I/usr/local/include/libart-2.0 -I/usr/local/include/orbit-2.0
> > -I/usr/local/include/libbonobo-2.0
> -I/usr/local/include/bonobo-activation-2.0
> > -I/usr/local/include/libxml2 -I/usr/local/include
> -I/usr/X11R6/include/gtk-2.0
> > -I/usr/X11R6/lib/gtk-2.0/include -I/usr/X11R6/include/pango-1.0
> > -I/usr/X11R6/include -I/usr/local/include/freetype2
> > -I/usr/X11R6/include/libgnomeui-2.0 -I/usr/X11R6/include/libgnome-2.0
> > -I/usr/X11R6/include/libgnomecanvas-2.0 -I/usr/X11R6/include/gconf/2
> > -I/usr/X11R6/include/libbonoboui-2.0 -I/usr/X11R6/include/gnome-vfs-2.0
> > -I/usr/X11R6/lib/gnome-vfs-2.0/include -I/usr/X11R6/include/libglade-2.0  
> -Wall
> > -Wmissing-prototypes    -I/usr/local/include -I/usr/X11R6/include  -O
> -pipe
> > -march=k6 -c button-widget.c
> > button-widget.c: In function `button_widget_class_init':
> > button-widget.c:789: `PANEL_TYPE_ORIENTATION' undeclared (first use in
> this
> > function)
> > button-widget.c:789: (Each undeclared identifier is reported only once
> > button-widget.c:789: for each function it appears in.)
> > gmake[1]: *** [button-widget.o] Error 1
> > gmake[1]: Leaving directory
> > `/usr/ports/x11/gnomepanel/work/gnome-panel-2.4.1/gnome-panel'
> > gmake: *** [install-recursive] Error 1
> > *** Error code 2
> > ---------
> > 
> > could anyone give me a hint what i can do??
> 
> The header file that defines this macro is dynamically generated at
> build-time by glib-mkenums.  Make sure all your ports are up-to-date
> (especially glib20), then make clean in gnomepanel, and try the build
> again.
> 
> Joe
> 
> > 
> > thanx in advance, tom
> > 
> > _______________________________________________
> > freebsd-ports@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-ports
> > To unsubscribe, send any mail to "freebsd-ports-unsubscribe@freebsd.org"
> -- 
> PGP Key : http://www.marcuscom.com/pgp.asc
> 

thanx for the tip; after reinstalling glib2 the compile did work but now i hang
in the gstreamer-plugins:

---snip-------------
gmake  all-am
gmake[4]: Entering directory
`/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst/level'
source='gstlevel.c' object='libgstlevel_la-gstlevel.lo' libtool=yes \
depfile='.deps/libgstlevel_la-gstlevel.Plo'
tmpdepfile='.deps/libgstlevel_la-gstlevel.TPlo' \
depmode=gcc /bin/sh ../../depcomp \
/bin/sh ../../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I../..  
-I/usr/X11R6/include -I/usr/local/include -I../../gst-libs -D_THREAD_SAFE
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/local/include/glib-2.0
-I/usr/local/lib/glib-2.0/include -I/usr/local/include/libxml2
-I/usr/local/include -I/usr/X11R6/include/gstreamer-0.6  
-DGST_DISABLE_DEPRECATED -g  -Wall -O -pipe -march=k6 -I/usr/local/include -c -o
libgstlevel_la-gstlevel.lo `test -f 'gstlevel.c' || echo './'`gstlevel.c
cc -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/X11R6/include -I/usr/local/include
-I../../gst-libs -D_THREAD_SAFE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include
-I/usr/local/include/libxml2 -I/usr/local/include
-I/usr/X11R6/include/gstreamer-0.6 -DGST_DISABLE_DEPRECATED -g -Wall -O -pipe
-march=k6 -I/usr/local/include -c gstlevel.c
-Wp,-MD,.deps/libgstlevel_la-gstlevel.TPlo  -fPIC -DPIC -o
libgstlevel_la-gstlevel.lo
In file included from gstlevel.c:190:
filter.func: In function `gst_level_fast_16bit_chain':
filter.func:15: syntax error before `normalizer'
filter.func:30: `normalizer' undeclared (first use in this function)
filter.func:30: (Each undeclared identifier is reported only once
filter.func:30: for each function it appears in.)
In file included from gstlevel.c:195:
filter.func: In function `gst_level_fast_8bit_chain':
filter.func:15: syntax error before `normalizer'
filter.func:30: `normalizer' undeclared (first use in this function)
gmake[4]: *** [libgstlevel_la-gstlevel.lo] Error 1
gmake[4]: Leaving directory
`/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst/level'
gmake[3]: *** [all] Error 2
gmake[3]: Leaving directory
`/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst/level'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory
`/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4/gst'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory
`/usr/ports/multimedia/gstreamer-plugins/work/gst-plugins-0.6.4'
gmake: *** [all] Error 2
*** Error code 2

Stop in /usr/ports/multimedia/gstreamer-plugins.

-----------------------

i already did another make clean but the error did not change...

tom




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1069081251.3fb8e2a382f9c>