Date: Wed, 28 Sep 2016 21:21:06 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Mori Hiroki <yamori813@yahoo.co.jp> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: AR7161 USB Message-ID: <CAJ-VmokSNP%2BZr5s14TzvkNMukLHRFEK9p2jEpfjB=X5N4u1=Sw@mail.gmail.com> In-Reply-To: <105245.8987.qm@web101701.mail.ssk.yahoo.co.jp> References: <379174.95890.qm@web101716.mail.ssk.yahoo.co.jp> <063ff05f-d464-823a-495c-abb800dfdaf5@freebsd.org> <105245.8987.qm@web101701.mail.ssk.yahoo.co.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
it could be something to do with port or phy power. check the default gpio settings for your board; some don't enable usb phy power. -a On 28 September 2016 at 20:51, Mori Hiroki <yamori813@yahoo.co.jp> wrote: > Hi. > > on WZR-HP-G300NH(AR9132) OK > > > > # usbconfig > ugen0.1: <EHCI root HUB Atheros> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr > =SAVE (0mA) > ugen0.2: <USB IR REMOCON Bit Trade One LTD.> at usbus0, cfg=0 md=HOST spd=FULL ( > 12Mbps) pwr=ON (100mA) > # > > > on WZR-HP-AG300H(AR7161) NG > > # usbconfig > ugen0.1: <OHCI root HUB Atheros> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr= > SAVE (0mA) > ugen1.1: <EHCI root HUB Atheros> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr > =SAVE (0mA) > > I use ZRouter on build. I check hints file. I seem same as > sys/mips/conf/AP96.hints. > > Thanks > > Hiroki Mori > > > > ----- Original Message ----- >> From: Sean Bruno <sbruno@freebsd.org> >> To: freebsd-mips@freebsd.org >> Cc: >> Date: 2016/9/27, Tue 23:10 >> Subject: Re: AR7161 USB >> >> >> >> On 09/27/16 04:02, Mori Hiroki wrote: >>> Hi. >>> >>> I try to use AR7161 target(WZR-HP-AG300H) on head today. >>> But I can't use USB this target. Device is probe on boot but USB device >>> insert not detect device. >>> >>> Any one use this ? >>> >>> Regards. >>> >>> Hiroki Mori >> >> Is umass.ko loaded? (I assume you are using a USB storage device). >> >> sean >> > _______________________________________________ > freebsd-mips@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-mips > To unsubscribe, send any mail to "freebsd-mips-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokSNP%2BZr5s14TzvkNMukLHRFEK9p2jEpfjB=X5N4u1=Sw>