Date: Mon, 30 Aug 1999 22:00:14 +0200 From: "Niels Chr. Bank-Pedersen" <ncbp@bank-pedersen.dk> To: freebsd-current@FreeBSD.org Subject: Problems with the latest changes to ifconfig (I guess) Message-ID: <19990830220014.A11116@bank-pedersen.dk>
next in thread | raw e-mail | index | archive | help
Hi,
After the recent changes to ifconfig and the xl driver I am getting
a panic when rc.network runs ifconfig:
[...]
Doing initial network setup: hostname.
UP,LOOPBACK,RUNN
ING,MULTICAST> m
E®Wio•Fnetmask 0xff0000a00
tal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x8:0x0
stack pointer = 0x10:0xc8d18dc4
frame pointer = 0x10:0xc8d18ddc
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 78 (ifconfig)
interrupt mask = net
kernel: type 12 trap, code=0
Stopped at 0:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc020cac4
stack pointer = 0x10:0xc8d18c3c
frame pointer = 0x10:0xc8d18c40
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 78 (ifconfig)
interrupt mask = net
kernel: type 12 trap, code=0
db>
This is after a make buildworld/installworld on -current (as of today).
dmesg and config-file:
FreeBSD/i386 bootstrap loader, Revision 0.7 639/65472kB
(root@home.bank-pedersen.dk, Mon Aug 30 10:58:22 CEST 1999)
/kernel text=0x164b84 data=0x1ee6c+0x1e1e8
syms=[0x4+0x24760+0x4+0x268f8]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel]...
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-CURRENT #0: Mon Aug 30 18:56:22 CEST 1999
root@home.bank-pedersen.dk:/usr/src/sys/compile/HOME
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (400.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 127102976 (124124K bytes)
Preloaded elf kernel "kernel" at 0xc02ef000.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc029d042 (1000022)
VESA: ATI MACH64
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
vga-pci0: <ATI model 4742 graphics accelerator> irq 15 at device 0.0 on
pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
chip1: <Intel PIIX4 IDE controller> at device 7.1 on pci0
chip2: <UHCI USB controller> at device 7.2 on pci0
chip3: <Intel 82371AB Power management controller> at device 7.3 on pci0
ahc0: <Adaptec 2940 SCSI adapter> irq 15 at device 15.0 on pci0
ahc0: aic7870 Wide Channel A, SCSI Id=7, 16/255 SCBs
pcm0: <AudioPCI ES1370> irq 11 at device 16.0 on pci0
pcm0: using I/O space register mapping at 0xe800
xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 18.0 on pci0
xl0: Ethernet address: 00:10:4b:7a:96:7d
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xlphy1: <3Com internal media interface> on miibus0
xlphy1: ignoring this PHY, non-zero instance
device_probe_and_attach: xlphy1 attach returned 6
Probing for PnP devices:
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <9 virtual consoles, flags=0x0>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da2 at ahc0 bus 0 target 8 lun 0
da2: <IBM DCAS-32160W !# S69D> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DORS-32160W WA6A> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <TOSHIBA CD-ROM XM-3601TA 0265> Removable CD-ROM SCSI-2 device
cd0: 4.237MB/s transfers (4.237MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
vinum: loaded
Can't open history file /var/tmp/vinum_history: Read-only file system
(30)
vinum: reading configuration from /dev/da2s1h
vinum: updating configuration from /dev/da1s1f
vinum: updating configuration from /dev/da1s1g
vinum: updating configuration from /dev/da1s1h
vinum: updating configuration from /dev/da2s1f
vinum: updating configuration from /dev/da2s1g
vinum: /dev is mounted read-only, not rebuilding /dev/vinum
swapon: adding /dev/da0s1b as swap device
swapon: adding /dev/da1s1b as swap device
swapon: adding /dev/da2s1b as swap device
Automatic reboot in progress...
# cat /usr/src/sys/i386/conf/HOME
machine i386
cpu I686_CPU
ident HOME
maxusers 64
#config kernel root on da0
options INET
options FFS
options NFS
options CD9660
options FFS_ROOT
options PROCFS
#options MSDOSFS
options COMPAT_43
options SCSI_DELAY=5000
options UCONSOLE
options USERCONFIG
options MAXCONS=9
#options VISUAL_USERCONFIG
options SOFTUPDATES
options NO_F00F_HACK
options ICMP_BANDLIM
options CLK_USE_TSC_CALIBRATION
options COMPAT_LINUX
options AHC_ALLOW_MEMIO
options P1003_1B
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
options SYSVSHM
options SYSVSEM
options SYSVMSG
options KTRACE
options VESA
options SC_HISTORY_SIZE=1024
options XSERVER
options DDB
#options GDB_REMOTE_CHAT
controller isa0 at nexus?
controller pnp0
controller pci0 at nexus?
controller atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa? port ? conflicts
device sc0 at isa?
controller fdc0 at isa? port IO_FD1 irq 6 drq 2
disk fd0 at fdc0 drive 0
controller ahc0
controller scbus0
device da0
device sa0
device cd0
device pass0
device pcm0
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus?
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device ppc0 at isa? port?
controller ppbus0
device lpt0 at ppbus?
#device ppi0 at ppbus?
#device lpbb0 at ppbus?
controller miibus0
device xl0
#controller smbus0
#controller intpm0
#device smb0 at smbus?
#controller iicbus0
#controller iicbb0
#device ic0 at iicbus?
#device iic0 at iicbus?
#device iicsmb0 at iicbus?
#controller uhci0
#controller ohci0
#controller usb0
pseudo-device loop
pseudo-device ether
pseudo-device pty 16
pseudo-device gzip
pseudo-device bpf 4
pseudo-device splash
#
/Niels Chr.
--
Niels Christian Bank-Pedersen, NCB1-RIPE.
Network Manager, Tele Danmark NET, IP-section.
"Hey, are any of you guys out there actually *using* RFC 1149?"
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990830220014.A11116>