Date: Wed, 28 Dec 2016 17:31:24 +0100 From: Polytropon <freebsd@edvax.de> To: swjatoslaw gerus <milstar2@eml.cc> Cc: freebsd-questions@freebsd.org Subject: Re: dd -bs=BYTES read and write up to BYTES at a time system - Message-ID: <20161228173124.fc0df62a.freebsd@edvax.de> In-Reply-To: <1482878672.2313143.830820153.12F00C98@webmail.messagingengine.com> References: <1482878672.2313143.830820153.12F00C98@webmail.messagingengine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 27 Dec 2016 23:44:32 +0100, swjatoslaw gerus wrote: > 1. Before received your e-mails ,task was performed with solaris ,but > not from publication (some public opinions exchange in internet) > > dd if=sol-11.3-live-x86 usb of=/dev/sdb1 > > work ... but with speed 2 mb/sek > > > After was performed task with solaris -poweroff > put flash in usb, can not be started ! black display ,one white " -" > more as 5 min That's a question more suited for a Solaris mailing list. :-) > 2. Performed with FreeBSD ,speed was some 10 mb/sek > > fdisk -l small change was C W95 FAT32,after FAT32(LBA) > > 3. next step ? If the USB stick has been properly created, you should try to boot from it. The installer will be launched automatically as you can see in the online documentation: https://www.freebsd.org/doc/handbook/bsdinstall-start.html See from 2.4.4, then: https://www.freebsd.org/doc/handbook/using-bsdinstall.html The installer will guide you through the required steps. There is _no_ need to "prepare" anything (like creating partitions and formatting them); everything the installer needs is some unallocated (!) space on the target disk. -- Polytropon Magdeburg, Germany Happy FreeBSD user since 4.0 Andra moi ennepe, Mousa, ...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20161228173124.fc0df62a.freebsd>