Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 15 Nov 2003 12:47:35 -0800
From:      Jos Backus <jos@catnook.com>
To:        freebsd-current@freebsd.org
Subject:   Re: dc still reporting collisions
Message-ID:  <20031115204757.GA98569@lizzy.catnook.com>
In-Reply-To: <20031115171702.F13393@hewey.af.speednet.com.au>
References:  <20031115164720.I13393@hewey.af.speednet.com.au> <20031115071458.GA29973@lizzy.catnook.com> <20031115171702.F13393@hewey.af.speednet.com.au>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Nov 15, 2003 at 05:23:08PM +1000, Andy Farkas wrote:
> Jos Backus wrote:
> 
> > Fwiw, I'm seeing the same with tx(4):
> 
> Looks like a different problem.
 
Probably. I was commenting on the (relatively) high collision count I'm
seeing. This is a hub (DSL router) with 2 PC's on it. I have never seen this
many collisions happening before. Plus I can no longer transfer files from the
Windows system to the FreeBSD system (even using FTP), something that worked
flawlessly at least until October 17th. So something is broken. You think it
could be hardware?

Thanks,
Jos

> > lizzy:~% ifconfig tx0
> > tx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> >         inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255
> >         inet 10.0.0.10 netmask 0xffffffff broadcast 10.0.0.10
> >         ether 00:e0:29:09:e4:1a
> >         media: Ethernet autoselect (10baseT/UTP)
> >         status: active
> > lizzy:~% netstat -i
> > Name    Mtu Network       Address              Ipkts Ierrs    Opkts Oerrs  Coll
> > tx0    1500 <Link#1>      00:e0:29:09:e4:1a   154423     1   118093     0   253
> > tx0    1500 10/24         lizzy               159162     -   122841     -     -
> > tx0    1500 10.0.0.10/32  lizzy-proxy             28     -       28     -     -
> > lo0   16384 <Link#2>                            5347     0     5347     0     0
> > lo0   16384 your-net      localhost              442     -      442     -     -
> > lizzy:~%
> 
> The dc(4) driver currently has an almost 1:1 ratio of packets:collisions.
> Your tx0 is quite low.
> 
> Seishi Hiragushi <s-hrgsh@lapis.plala.or.jp> reported this 1.5 months ago:
> 
> Message-Id: <20030902071657.1e94e2b4.s-hrgsh@lapis.plala.or.jp>
> 
> 
> --
> 
>  :{ andyf@speednet.com.au
> 
>         Andy Farkas
>     System Administrator
>    Speednet Communications
>  http://www.speednet.com.au/
> 
> 
> 
> 
> !DSPAM:3fb5d46c649171139613270!
> 
> 

-- 
Jos Backus                       _/  _/_/_/      Sunnyvale, CA
                                _/  _/   _/
                               _/  _/_/_/
                          _/  _/  _/    _/
jos at catnook.com        _/_/   _/_/_/          require 'std/disclaimer'



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031115204757.GA98569>