Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 18 Apr 2007 17:38:37 +0800
From:      Jason Chang =?big5?B?sWmzx6XN?= <jsc@ntu.edu.tw>
To:        freebsd-stable@freebsd.org
Cc:        jsc@ntu.edu.tw
Subject:   bge watchdog timeout -- resetting problem on recent update
Message-ID:  <20070418093837.GA32573@ccms.ntu.edu.tw>

next in thread | raw e-mail | index | archive | help

Dear All,

After recent cvsup and make world, my server suffered from the 
bge watchdog timeout -- resetting problem. Manually revert the
bge related source to older version and compiled a new kernel
may solve the problem. So I guess the recent committed source 
does not go well with bge nics onboard of IBM e326m servers.

1. server model
   IBM e326m server with dual AMD opteron cpus
   http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-61692
   bge chipset is Broadcom BCM5714 B3, ASIC rev. 0x8003

2. senario
   large network i/o results in error:
   bge0: watchdog timeout -- resetting
   bge0: link DOWN
   bge0: link state changed to DOWN
   bge0: link UP
   bge0: link state changed to UP

3. how to reproduce
   just ftp a file larger then 20mb, and the bge will have trouble in 30sec.

4. source version verified to work abnormally.
   if_bge.c 1.91.2.22
   if_bgereg.h 1.36.2.10
   brgphy.c 1.34.2.13

5. source version verified to work normally.
   if_bge.c 1.91.2.19
   if_bgereg.h 1.36.2.9
   brgphy.c 1.34.2.12
   
6. system dmesg:
      
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #13: Sat Apr 14 10:57:10 CST 2007
    root@ccsun52.cc.ntu.edu.tw:/usr/src/sys/amd64/compile/CCSUN52
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8061a000.
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <AMD    BLAST   >
Calibrating clock(s) ... i8254 clock: 1193293 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793019707 Hz
CPU: AMD Opteron(tm) Processor 254 (2793.02-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f51  Stepping = 1
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x1<SSE3>
  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x1<LAHF>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 2146828288 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000096fff, 614400 bytes (150 pages)
0x0000000000717000 - 0x000000007c2fcfff, 2076073984 bytes (506854 pages)
avail memory = 2066284544 (1970 MB)
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 5, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 6, Interrupt 32 at 0xfec02000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
ichwd module loaded
io: <I/O>
acpi0: <AMD   XSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: Power Button (fixed)
pci_open(1):    mode 1 addr port (0x0cf8) is 0x80016844
pci_open(1a):   mode1res=0x80000000 (0x80000000)
pci_cfgcheck:   device 0 1 [class=060400] [hdr=01] is there (id=00361166)
AcpiOsDerivePciId: bus 0 dev 24 func 1
unknown: I/O range not supported
ACPI timer: 0/4 0/5 0/4 0/4 0/4 0/4 0/3 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  10 11
  Validation          0   10   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  10 11
  Validation          0  255   N     0  10 11
  After Disable       0  255   N     0  10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  5 7 10 11
  Validation          0  255   N     0  5 7 10 11
  After Disable       0  255   N     0  5 7 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 7 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  9 11
  Validation          0  255   N     0  9 11
  After Disable       0  255   N     0  9 11
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  9 11
  Validation          0  255   N     0  9 11
  After Disable       0  255   N     0  9 11
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    7   N     0  3 4 5 7 10 11 12 14 15
  Validation          0    7   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link18:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link19:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link20:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link21:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link22:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link23:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link24:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link25:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link26:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link27:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link28:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link29:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link30:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link31:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link32:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link33:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link34:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <Cool`n'Quiet K8> on cpu0
powernow0: STATUS: 0x4060604141414
powernow0: STATUS: maxfid: 0x14
powernow0: STATUS: maxvid: 0x04
device_attach: powernow0 attach returned 6
cpu1: <ACPI CPU> on acpi0
powernow1: <Cool`n'Quiet K8> on cpu1
powernow1: STATUS: 0x4060604141414
powernow1: STATUS: maxfid: 0x14
powernow1: STATUS: maxvid: 0x04
device_attach: powernow1 attach returned 6
pcib0: <ACPI Host-PCI bridge> on acpi0
ACPI: Found matching pin for 0.3.INTA at func 0: 10
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0036, revid=0x00
        bus=0, slot=1, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0205, revid=0x00
        bus=0, slot=2, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0214, revid=0x00
        bus=0, slot=2, func=1
        class=01-01-8a, hdrtype=0x00, mfdev=1
        cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        powerspec 2  supports D0 D3  current D0
        map[20]: type 4, range 32, base 00002000, size  4, enabled
found-> vendor=0x1166, dev=0x0234, revid=0x00
        bus=0, slot=2, func=2
        class=06-01-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0223, revid=0x01
        bus=0, slot=3, func=0
        class=0c-03-10, hdrtype=0x00, mfdev=1
        cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type 1, range 32, base e8011000, size 12, enabled
        map[14]: type 4, range 32, base 00001000, size  8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1166, dev=0x0223, revid=0x01
        bus=0, slot=3, func=1
        class=0c-03-10, hdrtype=0x00, mfdev=0
        cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D3  current D0
        map[10]: type 1, range 32, base e8012000, size 12, enabled
        map[14]: type 4, range 32, base 00001400, size  8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1166, dev=0x0223, revid=0x01
        bus=0, slot=3, func=2
        class=0c-03-20, hdrtype=0x00, mfdev=0
        cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 1, range 32, base e8013000, size 12, enabled
        map[14]: type 4, range 32, base 00001800, size  8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKU:0)
pcib0: slot 3 INTA routed to irq 10 via \\_SB_.LNKU
found-> vendor=0x1002, dev=0x515e, revid=0x01
        bus=0, slot=4, func=0
        class=03-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0183, statreg=0x0290, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=5
        powerspec 2  supports D0 D1 D2 D3  current D0
        map[10]: type 3, range 32, base f0000000, size 27, enabled
        map[14]: type 4, range 32, base 00001c00, size  8, enabled
        map[18]: type 1, range 32, base e8000000, size 16, enabled
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 17
found-> vendor=0x1166, dev=0x0130, revid=0xa3
        bus=0, slot=6, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns)
found-> vendor=0x1166, dev=0x0130, revid=0xa3
        bus=0, slot=7, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        bus=0, slot=8, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        bus=0, slot=9, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        bus=0, slot=10, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0132, revid=0xa3
        bus=0, slot=11, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
        bus=0, slot=24, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
        bus=0, slot=24, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
        bus=0, slot=24, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
        bus=0, slot=24, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
        bus=0, slot=25, func=0
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
        bus=0, slot=25, func=1
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
        bus=0, slot=25, func=2
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
        bus=0, slot=25, func=3
        class=06-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   2
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xe8100000-0xe81fffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1166, dev=0x0104, revid=0xb2
        bus=1, slot=13, func=0
        class=06-04-00, hdrtype=0x01, mfdev=0
        cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x02 (500 ns)
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0x3000-0x3fff
pcib2:   memory decode     0xe8100000-0xe81fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x1000, dev=0x0030, revid=0x08
        bus=2, slot=3, func=0
        class=01-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
        lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12 (4500 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        map[10]: type 4, range 32, base 00003000, size  8, enabled
pcib2: requested I/O range 0x3000-0x30ff: in range
pcib1: requested I/O range 0x3000-0x30ff: in range
        map[14]: type 1, range 64, base e8120000, size 17, enabled
pcib2: requested memory range 0xe8120000-0xe813ffff: good
pcib1: requested memory range 0xe8120000-0xe813ffff: good
        map[1c]: type 1, range 64, base e8100000, size 17, enabled
pcib2: requested memory range 0xe8100000-0xe811ffff: good
pcib1: requested memory range 0xe8100000-0xe811ffff: good
pcib2: matched entry for 2.3.INTA
pcib2: slot 3 INTA hardwired to IRQ 18
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x3000-0x30ff mem 0xe8120000-0xe813fff
f,0xe8100000-0xe811ffff irq 18 at device 3.0 on pci2
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
mpt0: Reserved 0x20000 bytes for rid 0x14 type 3 at 0xe8120000
ioapic1: routing intpin 2 (PCI IRQ 18) to vector 49
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (6 Max)
atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x
177,0x376,0x2000-0x200f at device 2.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0x1000-0x10ff mem 0xe8011000-0xe8011
fff irq 10 at device 3.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8011000
ohci0: (New OHCI DeviceId=0x02231166)
ioapic0: routing intpin 10 (ISA IRQ 10) to vector 52
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0x1400-0x14ff mem 0xe8012000-0xe8012
fff irq 10 at device 3.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8012000
ohci1: (New OHCI DeviceId=0x02231166)
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0x1800-0x18ff mem 0xe8013000-0xe
8013fff irq 10 at device 3.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe8013000
ehci0: (New EHCI DeviceId=0x02231166)
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pci0: <display, VGA> at device 4.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xfff00000-0xfffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   I/O decode        0xf000-0xfff
pcib4:   memory decode     0xe8200000-0xe82fffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x14e4, dev=0x166a, revid=0x03
        bus=4, slot=4, func=0
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=7
        powerspec 2  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        map[10]: type 1, range 64, base e8210000, size 16, enabled
pcib4: requested memory range 0xe8210000-0xe821ffff: good
        map[18]: type 1, range 64, base e8200000, size 16, enabled
pcib4: requested memory range 0xe8200000-0xe820ffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 26
found-> vendor=0x14e4, dev=0x166a, revid=0x03
        bus=4, slot=4, func=1
        class=02-00-00, hdrtype=0x00, mfdev=1
        cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
        lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
        intpin=b, irq=10
        powerspec 2  supports D0 D3  current D0
        MSI supports 8 messages, 64 bit
        map[10]: type 1, range 64, base e8230000, size 16, enabled
pcib4: requested memory range 0xe8230000-0xe823ffff: good
        map[18]: type 1, range 64, base e8220000, size 16, enabled
pcib4: requested memory range 0xe8220000-0xe822ffff: good
pcib4: matched entry for 4.4.INTB
pcib4: slot 4 INTB hardwired to IRQ 27
bge0: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8210000-0xe821ffff,0xe82000
00-0xe820ffff irq 26 at device 4.0 on pci4
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8210000
miibus0: <MII bus> on bge0
brgphy0: <BCM5780 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:11:25:c4:1d:62
ioapic1: routing intpin 10 (PCI IRQ 26) to vector 53
bge0: [MPSAFE]
bge1: <Broadcom BCM5714 B3, ASIC rev. 0x8003> mem 0xe8230000-0xe823ffff,0xe82200
00-0xe822ffff irq 27 at device 4.1 on pci4
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe8230000
miibus1: <MII bus> on bge1
brgphy1: <BCM5780 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:11:25:c4:1d:63
ioapic1: routing intpin 11 (PCI IRQ 27) to vector 54
bge1: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0xfff00000-0xfffff
pcib5:   prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
pcib6: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib6:   secondary bus     6
pcib6:   subordinate bus   6
pcib6:   I/O decode        0xf000-0xfff
pcib6:   memory decode     0xfff00000-0xfffff
pcib6:   prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib7:   secondary bus     7
pcib7:   subordinate bus   7
pcib7:   I/O decode        0xf000-0xfff
pcib7:   memory decode     0xfff00000-0xfffff
pcib7:   prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib7
pci7: physical bus=7
pcib8: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib8:   secondary bus     8
pcib8:   subordinate bus   8
pcib8:   I/O decode        0xf000-0xfff
pcib8:   memory decode     0xfff00000-0xfffff
pcib8:   prefetched decode 0xfff00000-0xfffff
pcib8: could not get PCI interrupt routing table for \\_SB_.PCI0.EXB4 - AE_NOT_F
OUND
pci8: <ACPI PCI bus> on pcib8
pci8: physical bus=8
pcib9: <ACPI Host-PCI bridge> on acpi0
pcib9: reading config registers from 0:25:0
pcib9: couldn't read bus number from cfg space
pcib9: trying bus number 9
pcib9: could not get PCI interrupt routing table for \\_SB_.PCI1 - AE_NOT_FOUND
pci9: <ACPI PCI bus> on pcib9
pci9: physical bus=9
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
ukbd0: ATEN UC-10KM V1.3.121, rev 1.10/1.00, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
Device configuration finished.
Reducing kern.maxvnodes 130867 -> 100000
lapic: Divisor 2, Frequency 99750465 hz
Timecounter "TSC" frequency 2793019707 Hz quality -100
Timecounters tick every 1.000 msec
ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to d
eny, logging limited to 100 packets/entry by default
lo0: bpf attached
Waiting 3 seconds for SCSI devices to settle
(xpt0:mpt0:0:-1:-1): reset bus
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
ipmi0: IPMI device rev. 1, firmware rev. 1.81, version 1.5
ipmi0: Number of channels 3
ipmi0: Attached watchdog
(probe1:mpt0:1:0:0): error 22
(probe1:mpt0:1:0:0): Unretryable Error
(probe1:mpt0:1:1:0): error 22
(probe1:mpt0:1:1:0): Unretryable Error
(probe1:mpt0:1:2:0): error 22
(probe1:mpt0:1:2:0): Unretryable Error
(probe1:mpt0:1:3:0): error 22
(probe1:mpt0:1:3:0): Unretryable Error
(probe1:mpt0:1:4:0): error 22
(probe1:mpt0:1:4:0): Unretryable Error
(probe1:mpt0:1:5:0): error 22
(probe1:mpt0:1:5:0): Unretryable Error
(probe0:mpt0:0:0:0): Retrying Command
(probe0:mpt0:0:1:0): Retrying Command
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 25P3495a S320  1 1> Fixed Processor SCSI-2 device 
ses0: Serial Number 1
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pass0 at mpt0 bus 0 target 0 lun 0
pass0: <IBM-ESXS ST373207LC    FN B26C> Fixed Direct Access SCSI-4 device 
pass0: Serial Number 3KT4A4RN00007640LBTT
pass0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena
bled
pass1 at mpt0 bus 0 target 1 lun 0
pass1: <IBM-ESXS ST373207LC    FN B26C> Fixed Direct Access SCSI-4 device 
pass1: Serial Number 3KT4DDM700007640LDQE
pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Ena
bled
pass2 at mpt0 bus 0 target 8 lun 0
pass2: <IBM 25P3495a S320  1 1> Fixed Processor SCSI-2 device 
pass2: Serial Number 1
pass2: 3.300MB/s transfers
pt0 at mpt0 bus 0 target 8 lun 0
pt0: <IBM 25P3495a S320  1 1> Fixed Processor SCSI-2 device 
pt0: Serial Number 1
pt0: 3.300MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00040010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 10 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic1: Assigning PCI IRQ 18 to local APIC 0
ioapic1: Assigning PCI IRQ 26 to local APIC 1
ioapic1: Assigning PCI IRQ 27 to local APIC 0
da0 at mpt0 bus 0 target 0 lun 0
da0: <IBM-ESXS ST373207LC    FN B26C> Fixed Direct Access SCSI-4 device 
da0: Serial Number 3KT4A4RN00007640LBTT
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl
ed
da0: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 target 1 lun 0
da1: <IBM-ESXS ST373207LC    FN B26C> Fixed Direct Access SCSI-4 device 
da1: Serial Number 3KT4DDM700007640LDQE
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabl
ed
da1: 70006MB (143374000 512 byte sectors: 255H 63S/T 8924C)

Thanks for your time.

Sincerely,
Jason Chang




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070418093837.GA32573>