Date: Sun, 20 Nov 2005 21:39:36 -0800 From: Holland Rhodes <gavers@mac.com> To: freebsd-ppc@freebsd.org Subject: Video init problems, and install scenario Message-ID: <57B254E7-5D41-46B6-9FBF-20046B4FCCFB@mac.com>
next in thread | raw e-mail | index | archive | help
I'm having a little problem getting my Mac mini to boot with local video. I have a "best" configuration Mac mini (that is, with super drive, blue tooth and wifi). I intend for FreeBSD to be the only OS on the machine, so I first booted the OS 10.4 CD in single user mode and do: diskutil disk0 partitionDisk 3 UFS boot 32M UFS freebsd 72G UFS swap 2G (boot, freebsd and swap are simply volume labels, and are meaningless and unavailable in FreeBSD) I booted from the SNAP-7.0 disc, and installed without incident, marking ad0s5 as / and as0s7 as swap. Upon boot, I edited /boot/defaults/loader.conf adding the line: hint.pcib.1.skipslot="26" This skipped probing the internal Bluetooth module so that my USB keyboard would work at boot The "first" partition I created, which I labeled boot, is actually partition 3. I rebooted with the Mac OS X install DVD, launched Disk Utility and formatted that partition as HFS+. I copied /boot/loader from the ISO (using a convoluted method involving a USB thumb drive) to that newly HFS+ formatted volume. I then restarted my machine and landed myself in open firmware. Here's the part that you won't want to follow if you haven't followed every other step I've laid out. And, even if you did follow my steps, you won't want to do this, and here's why: I do: set boot-command boot hd:3,\boot\loader hd:5 shut-down Now, power on the machine, and great news, it boots right in to FreeBSD. Bad news is, the local display is unavailable. I can shell in to the box, and install, run programs, and do everything that I love about FreeBSD. The only problem is that I cannot use it from the local display and keyboard. To be honest, for me, no local display isn't really a problem. If something did go so badly with the machine that I had to visit it locally, I could simply boot in to open firmware (which initializes the display) and do boot 'hd:3,\boot\loader hd:5' to be interactive. So, my question (or bug report?) is... is there a way to get the FreeBSD bootloader to initialize the display? Beyond this, I've found FreeBSD to run well on PPC (albeit slow). I've used FreeBSD for a number of years, and only recently switched away from it in hopes of finding commercially supported hardware +software running FreeBSD. Mac OS X was the closest I've found. I really hope to see FreeBSD as a Tier 1 platform by next summer.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?57B254E7-5D41-46B6-9FBF-20046B4FCCFB>