Date: Sun, 3 Feb 2008 18:20:49 -0000 (GMT) From: "Reinhold" <freebsd@violetlan.net> To: "Alexander Motin" <mav@FreeBSD.org> Cc: Reinhold <freebsd@violetlan.net>, freebsd-questions@freebsd.org Subject: Re: mpd with a dual pppoe setup Message-ID: <1256.89.240.61.114.1202062849.squirrel@www.violetlan.net> In-Reply-To: <47A4FB57.40203@FreeBSD.org> References: <1201922586.00019085.1201909804@10.7.7.3> <47A4FB57.40203@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for the reply.
>> Here is what I've done so far.
>> /usr/local/etc/mpd5/mpd.conf
>>
>
> The config you have made probably suits to mpd3/4, but not to mpd5. Mpd5
> uses alike commands, but general configuration idea is different. There is
> no mpd.links file in mpd5. Read new examples present in package.
Thanks for that, I have added my new config file below.
>> set ipcp ranges static-ip-0/32 isp-gateway-0/32
>
> If you are connecting to the ISP it would be better not to specify IP to
> let them be negotiated.
How will I go ahead and set the static ips for both my wan connections?
For wan1 I have one ip and for wan2 I have 5 ips
I was orginally thinking of seting up proxy-arp to add the extra 4 ips on
wan2 after connecting using the first ip, but now I'm not to sure anymore.
We need these ips because some of the websites and servers that we manage
are ip restricked for added security, this is also the reason why I have a
pptp server for the people thats not in our office.
Here is my new conf file.
default:
load wan1
load wan2
load pptp
wan1:
create bundle static WAN1
set iface route default
set iface up-script /usr/local/etc/mpd/script-wan1.sh
set iface down-script /usr/local/etc/mpd/script-wan1.sh
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
create link static L1 pppoe
set link action bundle WAN1
set auth authname "username0@provider"
set auth password "passwd"
set pppoe iface fxp0
set pppoe service "BTConnect1"
load common_setting
wan2:
create bundle static WAN2
set iface route default
set iface up-script /usr/local/etc/mpd/script-wan2.sh
set iface down-script /usr/local/etc/mpd/script-wan2.sh
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
create link static L2 pppoe
set link action bundle WAN2
set auth authname "username1@provider"
set auth password "passwd"
set pppoe iface fxp1
set pppoe service "BTConnect2"
load common_setting
common_setting:
set bundle disable multilink
set link disable pap chap
set link accept chap
set link max-redial -1
set link mtu 1492
set link mru 1492
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp enable req-sec-dns
open
pptp:
set ippool add pool1 192.168.1.220 192.168.1.240
create bundle template B
set iface enable proxy-arp
set iface idle 1800
set iface enable tcpmssfix
set ipcp yes vjcomp
set ipcp ranges 192.168.1.1/32 ippool pool1
set ipcp dns 192.168.1.5
set bundle enable compression
set ccp yes mppc
set mppc yes e40
set mppc yes e128
set mppc yes stateless
create link template L pptp
set link action bundle B
set link enable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60
set link mtu 1460
set pptp self wan1-static-ip
set link enable incoming
How does mpd5 assign the ng interfaces, in my previose cong there was a
line new -i ng0 provider PPPoE0, does mpd5 do this automatically?
Thanks again for the help.
Reinhold
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1256.89.240.61.114.1202062849.squirrel>