Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Sep 2006 13:33:30 +0000 (UTC)
From:      Andre Oppermann <andre@FreeBSD.org>
To:        src-committers@FreeBSD.org, cvs-src@FreeBSD.org, cvs-all@FreeBSD.org
Subject:   cvs commit: src/sys/dev/bce if_bce.c src/sys/dev/bge if_bge.c src/sys/dev/em if_em.c src/sys/dev/ixgb if_ixgb.c src/sys/dev/nfe if_nfe.c src/sys/dev/nge if_nge.c src/sys/dev/re if_re.c src/sys/dev/stge if_stge.c src/sys/dev/ti if_ti.c src/sys/dev/txp ...
Message-ID:  <200609171333.k8HDXUht029746@repoman.freebsd.org>

next in thread | raw e-mail | index | archive | help
andre       2006-09-17 13:33:30 UTC

  FreeBSD src repository

  Modified files:
    sys/dev/bce          if_bce.c 
    sys/dev/bge          if_bge.c 
    sys/dev/em           if_em.c 
    sys/dev/ixgb         if_ixgb.c 
    sys/dev/nfe          if_nfe.c 
    sys/dev/nge          if_nge.c 
    sys/dev/re           if_re.c 
    sys/dev/stge         if_stge.c 
    sys/dev/ti           if_ti.c 
    sys/dev/txp          if_txp.c 
    sys/dev/vge          if_vge.c 
    sys/net              if_vlan.c if_vlan_var.h 
    sys/net80211         ieee80211_input.c ieee80211_output.c 
    sys/netgraph         ng_vlan.c 
    sys/sys              mbuf.h 
  Log:
  Move ethernet VLAN tags from mtags to its own mbuf packet header field
  m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
  signifies the presence and validity of its content.
  
  Drivers that support hardware VLAN tag stripping fill in the received
  VLAN tag (containing both vlan and priority information) into the
  ether_vtag mbuf packet header field:
  
          m->m_pkthdr.ether_vtag = vlan_id;       /* ntohs()? */
          m->m_flags |= M_VLANTAG;
  
  to mark the packet m with the specified VLAN tag.
  
  On output the driver should check the mbuf for the M_VLANTAG flag to
  see if a VLAN tag is present and valid:
  
          if (m->m_flags & M_VLANTAG) {
                  ... = m->m_pkthdr.ether_vtag;   /* htons()? */
                  ... pass tag to hardware ...
          }
  
  VLAN tags are stored in host byte order.  Byte swapping may be necessary.
  
  (Note: This driver conversion was mechanic and did not add or remove any
  byte swapping in the drivers.)
  
  Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
  memory allocation have to be done.
  
  Reviewed by:    thompsa, yar
  Sponsored by:   TCP/IP Optimization Fundraise 2005
  
  Revision  Changes    Path
  1.8       +4 -7      src/sys/dev/bce/if_bce.c
  1.146     +4 -6      src/sys/dev/bge/if_bge.c
  1.145     +7 -12     src/sys/dev/em/if_em.c
  1.20      +13 -4     src/sys/dev/ixgb/if_ixgb.c
  1.5       +5 -16     src/sys/dev/nfe/if_nfe.c
  1.89      +5 -8      src/sys/dev/nge/if_nge.c
  1.75      +6 -9      src/sys/dev/re/if_re.c
  1.3       +6 -6      src/sys/dev/stge/if_stge.c
  1.125     +4 -7      src/sys/dev/ti/if_ti.c
  1.42      +4 -7      src/sys/dev/txp/if_txp.c
  1.26      +5 -8      src/sys/dev/vge/if_vge.c
  1.115     +5 -17     src/sys/net/if_vlan.c
  1.25      +16 -39    src/sys/net/if_vlan_var.h
  1.95      +2 -10     src/sys/net80211/ieee80211_input.c
  1.43      +2 -3      src/sys/net80211/ieee80211_output.c
  1.4       +8 -8      src/sys/netgraph/ng_vlan.c
  1.196     +1 -4      src/sys/sys/mbuf.h



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200609171333.k8HDXUht029746>