Date: Mon, 16 Oct 2017 18:16:16 +0800 From: blubee blubeeme <gurenchan@gmail.com> To: Baptiste Daroussin <bapt@freebsd.org> Cc: FreeBSD Ports <freebsd-ports@freebsd.org> Subject: Re: gnu ltdl and FreeBSD Message-ID: <CALM2mEn=W=-mWXVZEDgDPF7BkLfBFkEa-s6gf6qpQGgVi%2BOtXg@mail.gmail.com> In-Reply-To: <CALM2mEm1==_h=U7rzHOo-qYh4KjmMkKO-HtHCP0aVoMWvSytFQ@mail.gmail.com> References: <CALM2mE=Pdqrv_2k7KVTQruZ8cFkQpypvy6Qn5OYfcWR7cv5mJA@mail.gmail.com> <20171016080724.4byyskmlbeloxhmt@ivaldir.net> <CALM2mEme59C4yngg618527OgHa1Bbraw8RiM_e6Z%2B8Z05sYN=w@mail.gmail.com> <20171016085009.exrw2xz4mpfp5s7h@ivaldir.net> <CALM2mEmkO9%2B1dzQ_GK9YW7Rcc7rHFQd4wToF_hSU3nAc0NAgJQ@mail.gmail.com> <20171016090901.4kx5xrvyyvpemli5@ivaldir.net> <CALM2mEm1==_h=U7rzHOo-qYh4KjmMkKO-HtHCP0aVoMWvSytFQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I had an idea that maybe the port was failing because of Clang compiler, so
I looked through the porters handbook and found
USE_GCC
this prompted me to install gcc 6.2 which i think is a little overkill plus
it also installed a few other packages as well. The build went through and
failed at this step trying to install
how can I control which version of gcc to use? I think this project should
build fine with gcc 4.8
install -m 0644 ./iconv.3
/usr/ports/converters/libiconv/work/stage/usr/local/man/man3/iconv.3
install -m 0644 ./iconv_close.3
/usr/ports/converters/libiconv/work/stage/usr/local/man/man3/iconv_close.3
install -m 0644 ./iconv_open.3
/usr/ports/converters/libiconv/work/stage/usr/local/man/man3/iconv_open.3
install -m 0644 ./iconv_open_into.3
/usr/ports/converters/libiconv/work/stage/usr/local/man/man3/iconv_open_into.3
install -m 0644 ./iconvctl.3
/usr/ports/converters/libiconv/work/stage/usr/local/man/man3/iconvctl.3
if [ ! -d
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv ] ;
then /bin/sh ../build-aux/mkinstalldirs
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv ; fi
mkdir /usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv
builddir="`pwd`"; cd . && for f in *.html ; do (cd "$builddir"; echo
install -m 0644 ./$f
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/$f ;
install -m 0644 ./$f
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/$f)
; done
install -m 0644 ./iconv.1.html
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/iconv.1.html
install -m 0644 ./iconv.3.html
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/iconv.3.html
install -m 0644 ./iconv_close.3.html
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/iconv_close.3.html
install -m 0644 ./iconv_open.3.html
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/iconv_open.3.html
install -m 0644 ./iconv_open_into.3.html
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/iconv_open_into.3.html
install -m 0644 ./iconvctl.3.html
/usr/ports/converters/libiconv/work/stage/usr/local/share/doc/libiconv/iconvctl.3.html
====> Compressing man pages (compress-man)
====> Running Q/A tests (stage-qa)
Warning: 'lib/libcharset.so.1.0.0' is not stripped consider trying
INSTALL_TARGET=install-strip or using ${STRIP_CMD}
Warning: 'lib/libiconv.so.2.5.1' is not stripped consider trying
INSTALL_TARGET=install-strip or using ${STRIP_CMD}
===> Installing for libiconv-1.14_11
===> Checking if libiconv already installed
===> An older version of libiconv is already installed (libiconv-1.14_10)
You may wish to ``make deinstall'' and install this port again
by ``make reinstall'' to upgrade it properly.
If you really wish to overwrite the old port of libiconv
without deleting it first, set the variable "FORCE_PKG_REGISTER"
in your environment or the "make install" command line.
*** Error code 1
Stop.
make[4]: stopped in /usr/ports/converters/libiconv
*** Error code 1
On Mon, Oct 16, 2017 at 5:50 PM, blubee blubeeme <gurenchan@gmail.com>
wrote:
> @Baptiste
>
> adding localbase to the USES macros made it past the previous errors. The
> compilation fails with this error:
>
> gmake[4]: Entering directory '/usr/ports/graphics/utsushi/
> work/utsushi-c590592/lib'
> depbase=`echo connexion.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\
> /bin/sh ../libtool --tag=CXX --mode=compile c++ -DHAVE_CONFIG_H -I..
> -pthread -I/usr/local/include -DPKGLIBEXECDIR="\"/usr/local/libexec/utsushi\""
> -DPKGLIBDIR="\"/usr/local/lib/utsushi\"" -DPKGDATADIR="\"/usr/local/share/utsushi\""
> -DLOCALEDIR="\"/usr/local/share/locale\"" -DPKGSYSCONFDIR="\"/usr/local/etc/utsushi\""
> -DPKGCONFFILE="\"utsushi.conf\"" -DCOMBOCONFFILE="\"combo.conf\""
> -isystem /usr/local/include -I/usr/local/include -I/usr/local/include -Wall
> -Werror -O2 -pipe -fstack-protector -isystem /usr/local/include
> -fno-strict-aliasing -isystem /usr/local/include -MT connexion.lo -MD -MP
> -MF $depbase.Tpo -c -o connexion.lo connexion.cpp &&\
> mv -f $depbase.Tpo $depbase.Plo
> libtool: compile: c++ -DHAVE_CONFIG_H -I.. -pthread -I/usr/local/include
> -DPKGLIBEXECDIR=\"/usr/local/libexec/utsushi\"
> -DPKGLIBDIR=\"/usr/local/lib/utsushi\" -DPKGDATADIR=\"/usr/local/share/utsushi\"
> -DLOCALEDIR=\"/usr/local/share/locale\" -DPKGSYSCONFDIR=\"/usr/local/etc/utsushi\"
> -DPKGCONFFILE=\"utsushi.conf\" -DCOMBOCONFFILE=\"combo.conf\" -isystem
> /usr/local/include -I/usr/local/include -I/usr/local/include -Wall -Werror
> -O2 -pipe -fstack-protector -isystem /usr/local/include
> -fno-strict-aliasing -isystem /usr/local/include -MT connexion.lo -MD -MP
> -MF .deps/connexion.Tpo -c connexion.cpp -fPIC -DPIC -o .libs/connexion.o
> In file included from connexion.cpp:44:
> ../utsushi/log.hpp:155:36: error: instantiation of variable
> 'utsushi::log::basic_logger<char, std::__1::char_traits<char> >::os_'
> required here,
> but no definition is available [-Werror,-Wundefined-var-template]
> basic_logger<charT, traits>::os_ << *this;
> ^
> ../utsushi/log.hpp:265:23: note: in instantiation of member function
> 'utsushi::log::basic_message<char, std::__1::char_traits<char>,
> std::__1::allocator<char> >::~basic_message' requested here
> expand_named_ctors (fatal, FATAL);
> ^
> ../utsushi/log.hpp:49:47: note: forward declaration of template entity is
> here
> static std::basic_ostream<charT, traits>& os_;
> ^
> 1 error generated.
>
>
> looking through the config.log files I see many similar errors such as:
> /usr/bin/ld: cannot find -lusb-1.0
> cc: error: linker command failed with exit code 1 (use -v to see
> invocation)
> configure:24532: $? = 1
>
> configure:15640: result: no
> configure:15644: checking for shl_load in -ldld
> configure:15669: cc -o conftest -O2 -pipe -fstack-protector -isystem
> /usr/local/include -fno-strict-aliasing -isystem /usr/local/include
> -I/usr/local/include -fstack-protector -L/usr/local/lib conftest.c -ldld
> >&5
> /usr/bin/ld: cannot find -ldld
>
> configure:19867: cc -o conftest -O2 -pipe -fstack-protector -isystem
> /usr/local/include -fno-strict-aliasing -isystem /usr/local/include
> -I/usr/local/include -fstack-protector -L/usr/local/lib conftest.c -ldld
> >&5
> /usr/bin/ld: cannot find -ldld
> cc: error: linker command failed with exit code 1 (use -v to see
> invocation)
>
> are those the reasons for the compilation error up above?
>
>
> On Mon, Oct 16, 2017 at 5:09 PM, Baptiste Daroussin <bapt@freebsd.org>
> wrote:
>
>> On Mon, Oct 16, 2017 at 08:58:32AM +0000, blubee blubeeme wrote:
>> > I've tried passing CONFIGURE_ARGS or removing it, both gives the same
>> error
>> > below.
>> > LIB_DEPENDS= libltdl.so:devel/libltdl
>> > GNU_CONFIGURE= yes
>> > CONFIGURE_ARGS= --enable-ltdl-install
>> > USES= autoreconf gmake libtool
>> >
>> > the config.log file is there and it's pretty long as well I am looking
>> > through it but I am not sure what exactly to look for.
>> >
>> > Here's a pastebin with that config.log file:
>> https://pastebin.com/NjkgBTeM
>>
>> configure:20354: cc -o conftest -O2 -pipe -fstack-protector
>> -fno-strict-aliasing -I/usr/local/include -fstack-protector conftest.c
>> -lltdl
>> >&5
>> /usr/bin/ld: cannot find -lltdl
>>
>>
>> this is your failure.
>>
>> Try adding USES=localbase and if it fails adding USES=localbase:ldflags
>>
>> Bapt
>>
>
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALM2mEn=W=-mWXVZEDgDPF7BkLfBFkEa-s6gf6qpQGgVi%2BOtXg>