Date: Tue, 14 Mar 2006 17:19:04 +0100 From: <Tyrone@telecity.se> To: <freebsd-ipfw@freebsd.org> Subject: ipfw Unrecognised option Message-ID: <D3BBF0C6F2FC0448BFCA2F965F2192630F6ECA@sto1.tcy.prv>
next in thread | raw e-mail | index | archive | help
I'm running FreeBSD 5.4-RELEASE FreeBSD 5.4-RELEASE #6:
=20
When running the following line I get the following error, vlan117 is up
and running and working just fine, but I can't seem to do any shaping on
it.
=20
ipfw add 107 queue 9 ip from any to any in vlan117
ipfw: unrecognised option [-1] vlan117
=20
vlan117: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet xxx.xxx.xxx.xxx netmask 0xffffffe0 broadcast
xxx.xxx.xxx.xxx
ether 00:30:48:85:1a:8e
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
vlan: 117 parent interface: bge0
=20
any ideas why I get the error?
=20
Tyrone Van Der Haar
DISCLAIMER
This e-mail is intended only for the use of the addressees named above
and may be confidential. If you are not an addressee you must not use
any information contained in nor copy it nor inform any person other
than TeleCity or the addressees of its existence or contents. If you
have received this e-mail in error, please contact the TeleCity IT
department on +44 (0) 161 232 3220 or by email at
techsupport@telecity.com. Internet communications cannot be guaranteed
100% secure, you should therefore take this potential lack of security
into consideration when emailing us as we do not accept legal
responsibility for the security of the contents of this or other =
emails. Whilst TeleCity take measures to prevent any virus
contamination of our computer systems, recipients of emails should
always ensure that they take their own precautions to avoid virus
contamination.
=0D
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?D3BBF0C6F2FC0448BFCA2F965F2192630F6ECA>