Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 11 Mar 2006 23:44:18 +0100 (CET)
From:      ehrhard.herbst@sz-online.de
To:        questions@FreeBSD.org
Subject:   Problem Installing FreeBSD 6.0, asking for help
Message-ID:  <39964.145.254.80.158.1142117058.squirrel@webmail.sz-online.de>

next in thread | raw e-mail | index | archive | help
Hello,

may I ask you for help with the following Problem:
When I try to install FreeBsd6.0, there is the following error during the
boot process (because the system is not able to boot from CD, I have to boot
from floppy) occurs:
ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620
ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b
ahc0: Issued channel A bus reset, SCBs 6 aborted.
...
...
...

There are variants of the messages with different SCB, flags and status.

As a result, the install program does not find any disk.
FreeBSD5.2 is running and dmesg produces the following output:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
    root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (797.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (255 MB)
avail memory = 251047936 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <GBT    AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdee0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 9 INTA is routed to irq 10
pcib0: slot 10 INTA is routed to irq 12
pcib0: slot 11 INTA is routed to irq 5
agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem
0xd8000000-0xdbffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596B UDMA66 controller> port 0xd000-0xd00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <bridge, HOST-PCI> at device 7.3 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd800-0xd8ff mem
0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0
rl0: Ethernet address: 00:40:33:ab:df:66
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 10.0 (no driver attached)
ahc0: <Adaptec 2940 SCSI adapter> port 0xe000-0xe0ff mem
0xe3000000-0xe3000fff irq 5 at device 11.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xc8000-0xca7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 797967629 Hz quality 800
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk cd0 dp=0xc2d77600
GEOM: create disk cd1 dp=0xc2d77e00
GEOM: create disk da0 dp=0xc2e24050
GEOM: create disk da1 dp=0xc2e26850
GEOM: create disk da2 dp=0xc2e26450
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-32TS 1.02> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [329666 x 2048 byte records]
cd1 at ahc0 bus 0 target 5 lun 0
cd1: <YAMAHA CRW4416S 1.0f> Removable CD-ROM SCSI-2 device
cd1: 8.333MB/s transfers (8.333MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15)
da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-34560 S92A> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
Mounting root from ufs:/dev/da0s1a

Best regards
E. Herbst.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39964.145.254.80.158.1142117058.squirrel>