Date: Sun, 21 Jan 2001 19:20:28 -0600 From: David Syphers <dbsypher@uchicago.edu> To: mobile@freebsd.org Subject: configuring AmbiCom cardbus Message-ID: <4.3.2.7.2.20010121190509.00c05f00@nsit-popmail.uchicago.edu>
next in thread | raw e-mail | index | archive | help
--=====================_10962493==_
Content-Type: text/plain; charset="us-ascii"; format=flowed
I'm running a 5-CURRENT snapshot from January 20. I've built a kernel that
includes cardbus, pccbb, miibus, and dc (for my AmbiCom 8100 DEC
Tulip-based card), and enabled DHCP. Right now I'm getting "watchdog
timeout" errors on boot. Last time I tried this (Dec. 5) the errors were
due to the fact that the graphics controller and the ethernet card were
both being assigned IRQ 11. I've tried editing /etc/pccard.conf so that it
doesn't consider IRQ 11 free, but this doesn't affect anything. This time
(Jan. 20), though, there seems to be no mention of my graphics controller
in the dmesg (another thing to worry about?) - the line below is from a
boot on a December 5 -CURRENT system.
pci0: <NeoMagic MagicGraph 128XD SVGA controller> (vendor=0x10c8,
dev=0x0004) at 2.0 irq 11
I've looked at /boot/device.hints, but it doesn't seem I should put
anything in there - everything in there is ISA. Anyway, I tried that on
the December 5 system and although it got rid of the watchdog timeout
errors, the card seemed no closer to working.
The output of a boot -v is attached. Any ideas would be appreciated. Thanks,
-David
--=====================_10962493==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="dmesg_v"
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-20010120-CURRENT #0: Sat Jan 20 20:34:57 CST 2001
root@:/usr/src/sys/compile/CERBERUS
Calibrating clock(s) ... TSC clock: 267278109 Hz, i8254 clock: 1193206 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 83886080 (81920K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0032d000 - 0x04ff7fff, 80523264 bytes (19659 pages)
avail memory = 78450688 (76612K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6eb0
bios32: Entry = 0xfd7f2 (c00fd7f2) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7f0+0x205
pnpbios: Found PnP BIOS data at 0xc00f6ee0
pnpbios: Entry = f0000:a84f Rev = 1.0
pnpbios: Event flag at 400
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc0307000.
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Math emulator present
Using $PIR table, 5 entries at 0xc00fdf70
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 26, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base fd000000, size 24, enabled
map[14]: type 1, range 32, base fea00000, size 21, enabled
map[18]: type 1, range 32, base fed00000, size 20, enabled
found-> vendor=0x10c8, dev=0x0004, revid=0x00
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000fcd0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000fce0, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=255
map[90]: type 4, range 32, base 00002180, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
found-> vendor=0x104c, dev=0xac15, revid=0x01
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=255
found-> vendor=0x104c, dev=0xac15, revid=0x01
bus=0, slot=10, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=255
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe a=00 b=00
ata0-slave: ATAPI probe a=00 b=00
ata0: mask=03 status0=50 status1=00
ata0-master: ATA probe a=01 b=a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
pci0: <serial bus, USB> at 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
pccbb0: <TI1131 PCI-CardBus Bridge> at device 10.0 on pci0
pccbb0: PCI Memory allocated: 44000000
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: 0:10 INTA routed to irq 11
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccbb0: WARNING: cannot attach pccard bus.
pccbb1: <TI1131 PCI-CardBus Bridge> at device 10.1 on pci0
pccbb1: PCI Memory allocated: 44001000
pci_cfgintr_unique: hard-routed to irq 11
pci_cfgintr: 0:10 INTB routed to irq 11
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccbb1: WARNING: cannot attach pccard bus.
ata-: ata0 already exists, using ata2 instead
Trying Read_Port at 203
YMH0021: start dependant
YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0x537, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8
YMH0021: adding io range 0x330-0x331, size=0x2, align=0x2
YMH0021: adding io range 0x370-0x371, size=0x2, align=0x2
YMH0021: adding irq mask 0x20
YMH0021: adding dma mask 0x1
YMH0021: adding dma mask 0x80
YMH0021: start dependant
YMH0021: adding io range 0x240-0x24f, size=0x10, align=0x10
YMH0021: adding io range 0xe80-0xe87, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x8
YMH0021: adding io range 0x300-0x301, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea0
YMH0021: adding dma mask 0x3
YMH0021: adding dma mask 0x80
YMH0021: start dependant
YMH0021: adding io range 0x220-0x28f, size=0x10, align=0x10
YMH0021: adding io range 0x530-0xf4f, size=0x8, align=0x8
YMH0021: adding io range 0x388-0x3ff, size=0x8, align=0x8
YMH0021: adding io range 0x300-0x335, size=0x2, align=0x2
YMH0021: adding io range 0x100-0xfff, size=0x2, align=0x2
YMH0021: adding irq mask 0xea8
YMH0021: adding dma mask 0x83
YMH0021: adding dma mask 0x83
YMH0021: end dependant
YMH0022: start dependant
YMH0022: adding io range 0x201-0x201, size=0x1, align=0x1
YMH0022: start dependant
YMH0022: adding io range 0x202-0x202, size=0x1, align=0x1
YMH0022: start dependant
YMH0022: adding io range 0x203-0x203, size=0x1, align=0x1
YMH0022: start dependant
YMH0022: adding io range 0x204-0x20f, size=0x1, align=0x1
YMH0022: end dependant
pnpbios: 17 devices, largest 222 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xdc000-0xfffff, size=0x24000
PNP0c01: adding fixed memory32 range 0xca000-0xcffff, size=0x6000
PNP0c01: adding fixed memory32 range 0x100000-0x4ffffff, size=0x4f00000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x10-0x18, size=0x9, align=0x1
PNP0c02: adding io range 0x1f-0x1f, size=0x1, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x74-0x77, size=0x4, align=0x1
PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1
PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1
PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x1
PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c02: end config
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 2 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 3 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 7 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 8 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1
PNP0c02: end config
pnpbios: handle 10 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 11 device ID PNP0501 (0105d041)
NSC6001: adding dma mask 0x8
NSC6001: adding io range 0x2f8-0x2ff, size=0x8, align=0x1
NSC6001: adding irq mask 0x8
NSC6001: end config
pnpbios: handle 12 device ID NSC6001 (0160633a)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 15 device ID PNP0f13 (130fd041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0400: adding irq mask 0x80
PNP0400: end config
pnpbios: handle 18 device ID PNP0400 (0004d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 20 device ID PNP0700 (0007d041)
PNP0e03: adding io range 0-0xffffffff, size=0, align=0
PNP0e03: end config
pnpbios: handle 22 device ID PNP0e03 (030ed041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ata2 failed to probe at port 0x1f0 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 880C> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0xb8 s2=0x18, s3=0x30
vpo0: <Iomega Matchmaker Parallel to SCSI interface> on ppbus0
imm0: NIBBLE mode
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x61 0x71 0x61 0x61
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x61 0x69 0x61 0x61
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <YAMAHA OPL3-SAx Audio System> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x330-0x331,0x370-0x371 irq 5 drq 0,7 on isa0
unknown: <YAMAHA OPL3-SAx Audio System> failed to probe at port 0x201 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <NSC6001> can't assign resources
unknown: <NSC6001> at port 0x2f8-0x2ff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0e03> failed to probe at port 0x19 on isa0
BIOS Geometries:
0:03df7f3f 0..991=992 cylinders, 0..127=128 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
bpf: faith0 attached
ata0-master: success setting UDMA2 on PIIX4 chip
Creating DISK ad0
ad0: <TOSHIBA MK4006MAV/F2.03 A> ATA-4 disk at ata0-master
ad0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=2 cblid=0
ad0: 3909MB <TOSHIBA MK4006MAV> [7944/16/63] at ata0-master UDMA33
(probe6:vpo0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe6:vpo0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe6:vpo0:0:6:0): Invalid field in CDB
(probe6:vpo0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe6:vpo0:0:6:0): NOT READY asc:3a,0
(probe6:vpo0:0:6:0): Medium not present
(probe6:vpo0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe6:vpo0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe6:vpo0:0:6:0): Invalid field in CDB
Creating DISK da0
(da0:vpo0:0:6:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:vpo0:0:6:0): NOT READY asc:3a,0
(da0:vpo0:0:6:0): Medium not present
da0 at vpo0 bus 0 target 6 lun 0
da0: <IOMEGA ZIP 100 J.67> Removable Direct Access SCSI-2 device
da0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x16, start 63, end = 4193279, size 4193217 : OK
ad0s2: type 0xa5, start 4193280, end = 8007551, size 3814272 : OK
pccbb0: card inserted: event=0x00000001, state=30000b29
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: bad Vcc request. ctrl=0x0, status=0x30000b29
pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
pccbb0: bad Vcc request. ctrl=0x33, status=0x30000b20
pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
found-> vendor=0x1011, dev=0x0019, revid=0x41
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns)
intpin=a, irq=0
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 5.0
Product name: AmbiCom, Inc. | AMB8100 | Fast Ethernet CardBus PC Card | 1.00 |
Manufacturer ID: 13958100
Functions: Network Adaptor, Multi-Functioned
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
cardbus0: Opening BAR: type=IO, bar=10, len=0080
TUPLE: CONFIG_CB [7]: 03 01 00 00 00 00 ff
TUPLE: CFTABLE_ENTRY_CB [5]: 41 80 fb 00 ff
CIS reading done
cardbus0: <unknown card> (vendor=0x1011, dev=0x0019) at 0.0 irq 0
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: bad Vcc request. ctrl=0x0, status=0x30000b69
pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: card activation failed
cardbus1: Detaching card: no cards to detach!
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
start_init: trying /sbin/init
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
pccbb0: bad Vcc request. ctrl=0x33, status=0x30000b20
pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 5.0
Product name: AmbiCom, Inc. | AMB8100 | Fast Ethernet CardBus PC Card | 1.00 |
Manufacturer ID: 13958100
Functions: Network Adaptor, Multi-Functioned
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
cardbus0: Opening BAR: type=IO, bar=10, len=0080
TUPLE: CONFIG_CB [7]: 03 01 00 00 00 00 ff
TUPLE: CFTABLE_ENTRY_CB [5]: 41 80 fb 00 ff
CIS reading done
dc0: <Intel 21143 10/100BaseTX> port 0x3000-0x307f mem 0x44040000-0x4407ffff,0x44002000-0x440023ff irq 11 at device 0.0 on cardbus0
dc0: Ethernet address: 00:80:00:80:00:80
bpf: dc0 attached
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
splash: image decoder found: logo_saver
Linux ELF exec handler installed
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
dc0: watchdog timeout
--=====================_10962493==_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.2.7.2.20010121190509.00c05f00>