Date: Wed, 22 Nov 95 09:27:56 GMT From: Charlie Conklin <charlie_conklin@il.us.swissbank.com> To: questions@FreeBSD.ORG Subject: Getting an optical drive to work Message-ID: <9511220928.AA02124@ln1d370nwk>
next in thread | raw e-mail | index | archive | help
Hi, I have FreeBSD on a Gateway machine, and am trying to get a SCSI optical drive to work. At boot time, the device is found and recognised, but it does not seem to assign it to any any of the special files in /dev. Does anybody have any hints as to how to get this to work? The pertinent part of the boot messages follows: ahc0 <Adaptec 294X SCSI host adapter> rev 0 int a irq 9 on pci0:6 ahc0: reading board settings ahc0: 294x Single Channel, SCSI Id=7, aic7870, 16 SCBs ahc0: Downloading Sequencer Program...Done ahc0: Probing channel A ahc0 waiting for scsi devices to settle ahc0: target 0 synchronous at 10.0MB/s, offset = 0x8 (ahc0:0:0): "COMPAQ C2490A 3184" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2006MB (4110000 512 byte sectors) ahc0: target 2 synchronous at 4.4MB/s, offset = 0x8 (ahc0:2:0): "FUJITSU M2266S-1024 0014" type 0 fixed SCSI 1 sd1(ahc0:2:0): Direct-Access 1087MB (1113504 1024 byte sectors) ahc0: target 6 synchronous at 5.0MB/s, offset = 0x8 (ahc0:6:0): "FUJITSU M2512A 1314" type 7 removable SCSI 2 uk0(ahc0:6:0): Unknown The optical is the Fuji M2512A found, and is a 230MB capacity removable optical. Thanks for any help. - Charlie Conklin conklic@swissbank.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9511220928.AA02124>