Date: Wed, 23 Oct 2013 16:12:20 +0000 (UTC) From: Will Andrews <will@FreeBSD.org> To: src-committers@freebsd.org, svn-src-projects@freebsd.org Subject: svn commit: r256980 - projects/vps/sys/mips/conf Message-ID: <201310231612.r9NGCKI4043843@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: will Date: Wed Oct 23 16:12:20 2013 New Revision: 256980 URL: http://svnweb.freebsd.org/changeset/base/256980 Log: Add file missing from previous commits. Added: projects/vps/sys/mips/conf/EDGEROUTER_VPS Added: projects/vps/sys/mips/conf/EDGEROUTER_VPS ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ projects/vps/sys/mips/conf/EDGEROUTER_VPS Wed Oct 23 16:12:20 2013 (r256980) @@ -0,0 +1,330 @@ +# +# OCTEON1 -- Generic kernel configuration file for FreeBSD/MIPS on Cavium Octeon +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD: head/sys/mips/conf/OCTEON1 250429 2013-05-10 03:05:44Z imp $ + +ident EDGEROUTER_VPS + +options VPS +options VPS_STATIC +options VIMAGE + +#options MD_ROOT_SIZE=8192 # Reserve 8 MB for MD root image +#makeoptions MFS_IMAGE=/usr/src/edgerouter/mdroot.img + +options ROOTDEVNAME=\"ufs:da0s2a\" # Default root filesystem. + +makeoptions ARCH_FLAGS="-march=octeon -mabi=64" +makeoptions LDSCRIPT_NAME=ldscript.mips.octeon1 + +# Don't build any modules yet. +makeoptions MODULES_OVERRIDE="" +makeoptions KERNLOADADDR=0xffffffff80100000 + +# We don't need to build a trampolined version of the kernel. +makeoptions WITHOUT_KERNEL_TRAMPOLINE=1 + +include "../cavium/std.octeon1" + +hints "OCTEON1.hints" #Default places to look for devices. + +makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols + +# Board-specific support that cannot be auto-detected at runtime. +#options OCTEON_VENDOR_LANNER # Support for Lanner boards. +#options OCTEON_VENDOR_RADISYS # Support for Radisys boards. +options OCTEON_VENDOR_UBIQUITI # Support for Ubiquiti boards. +#options OCTEON_VENDOR_GEFES # Support for GE LANIC boards +#options OCTEON_BOARD_CAPK_0100ND # Support for CAPK-0100nd. + +# Compile for a specified Octeon model. If not specified, support for +# detection at runtime will be used instead, which may give inferior +# performance. +# +# See sys/contrib/octeon-sdk/octeon-model.h for possible values. +#options OCTEON_MODEL=OCTEON_CN58XX_PASS1_1 + +options SCHED_ULE # ULE scheduler +options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options MD_ROOT # MD is a potential root device +options NFSCL # Network Filesystem Client +options NFSD # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +#options COMPAT_FREEBSD32 # Compatible with o32 binaries +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) support +options STACK # stack(9) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. +options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) +options AUDIT # Security event auditing +options MAC # TrustedBSD MAC Framework +#options KDTRACE_FRAME # Ensure frames are compiled in +#options KDTRACE_HOOKS # Kernel DTrace hooks +options INCLUDE_CONFIG_FILE # Include this file in kernel +options NO_SWAPPING # Disable support for paging + +# Debugging for use in -current +options KDB # Enable kernel debugger support. +options DDB # Support DDB. +options GDB # Support remote GDB. +options DEADLKRES # Enable the deadlock resolver +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones + +# Make an SMP-capable kernel by default +options SMP # Symmetric MultiProcessor Kernel + +# Bus support. +device pci + +# ATA controllers +device ahci # AHCI-compatible SATA controllers +device ata # Legacy ATA/SATA controllers +options ATA_STATIC_ID # Static device numbering +device mvs # Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA +device siis # SiliconImage SiI3124/SiI3132/SiI3531 SATA + +# On-board Compact Flash driver. +device cf +#options ROOTDEVNAME=\"ufs:cf0s2a\" # Default root filesystem. + +# SCSI Controllers +device ahc # AHA2940 and onboard AIC7xxx devices +options AHC_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~128k to driver. +device ahd # AHA39320/29320 and onboard AIC79xx devices +options AHD_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~215k to driver. +device esp # AMD Am53C974 (Tekram DC-390(T)) +device hptiop # Highpoint RocketRaid 3xxx series +device isp # Qlogic family +#device ispfw # Firmware for QLogic HBAs- normally a module +device mpt # LSI-Logic MPT-Fusion +device mps # LSI-Logic MPT-Fusion 2 +#device ncr # NCR/Symbios Logic +device trm # Tekram DC395U/UW/F DC315U adapters + +device adv # Advansys SCSI adapters +device adw # Advansys wide SCSI adapters +device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. +device bt # Buslogic/Mylex MultiMaster SCSI adapters + +# ATA/SCSI peripherals +device scbus # SCSI bus (required for ATA/SCSI) +device ch # SCSI media changers +device da # Direct Access (disks) +device sa # Sequential Access (tape etc) +device cd # CD +device pass # Passthrough device (direct ATA/SCSI access) +device ses # Enclosure Services (SES and SAF-TE) + +# RAID controllers interfaced to the SCSI subsystem +device amr # AMI MegaRAID +#XXX it is not 64-bit clean, -scottl +#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID +device ciss # Compaq Smart RAID 5* +device dpt # DPT Smartcache III, IV - See NOTES for options +device iir # Intel Integrated RAID +device ips # IBM (Adaptec) ServeRAID +device mly # Mylex AcceleRAID/eXtremeRAID + +# RAID controllers +device aac # Adaptec FSA RAID +device aacp # SCSI passthrough for aac (requires CAM) +device ida # Compaq Smart RAID +device mfi # LSI MegaRAID SAS +device mlx # Mylex DAC960 family +#XXX pointer/int warnings +#device pst # Promise Supertrak SX6000 +device twe # 3ware ATA RAID + +# PCCARD (PCMCIA) support +# PCMCIA and cardbus bridge support +device cbb # cardbus (yenta) bridge +device pccard # PC Card (16-bit) bus +device cardbus # CardBus (32-bit) bus + +# Serial (COM) ports +device uart # Generic UART driver + +# If you've got a "dumb" serial or parallel PCI card that is +# supported by the puc(4) glue driver, uncomment the following +# line to enable it (connects to sio, uart and/or ppc drivers): +#device puc + +# On-board Cavium Octeon Ethernet. +# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! +device octe + +# Cavium Octeon management Ethernet. +device octm + +# Switch PHY support for the octe driver. These currently present a VLAN per +# physical port, but may eventually provide support for DSA or similar instead. +#device mv88e61xxphy # Marvell 88E61XX + +# PCI Ethernet NICs. +device de # DEC/Intel DC21x4x (``Tulip'') +device em # Intel PRO/1000 Gigabit Ethernet Family +device igb # Intel PRO/1000 PCIE Server Gigabit Family +device ixgbe # Intel PRO/10GbE PCIE Ethernet Family +device le # AMD Am7900 LANCE and Am79C9xx PCnet +device ti # Alteon Networks Tigon I/II gigabit Ethernet +device txp # 3Com 3cR990 (``Typhoon'') +device vx # 3Com 3c590, 3c595 (``Vortex'') + +# PCI Ethernet NICs that use the common MII bus controller code. +# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! +device miibus # MII bus support +device ae # Attansic/Atheros L2 FastEthernet +device age # Attansic/Atheros L1 Gigabit Ethernet +device alc # Atheros AR8131/AR8132 Ethernet +device ale # Atheros AR8121/AR8113/AR8114 Ethernet +device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet +device bfe # Broadcom BCM440x 10/100 Ethernet +device bge # Broadcom BCM570xx Gigabit Ethernet +device dc # DEC/Intel 21143 and various workalikes +device et # Agere ET1310 10/100/Gigabit Ethernet +device fxp # Intel EtherExpress PRO/100B (82557, 82558) +device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet +device lge # Level 1 LXT1001 gigabit Ethernet +device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet +device nge # NatSemi DP83820 gigabit Ethernet +#device nve # nVidia nForce MCP on-board Ethernet Networking +device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') +device re # RealTek 8139C+/8169/8169S/8110S +device rl # RealTek 8129/8139 +device sf # Adaptec AIC-6915 (``Starfire'') +device sge # Silicon Integrated Systems SiS190/191 +device sis # Silicon Integrated Systems SiS 900/SiS 7016 +device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet +device ste # Sundance ST201 (D-Link DFE-550TX) +device stge # Sundance/Tamarack TC9021 gigabit Ethernet +device tl # Texas Instruments ThunderLAN +device tx # SMC EtherPower II (83c170 ``EPIC'') +device vge # VIA VT612x gigabit Ethernet +device vr # VIA Rhine, Rhine II +device wb # Winbond W89C840F +device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') + +# Wireless NIC cards +device wlan # 802.11 support +options IEEE80211_DEBUG # enable debug msgs +options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's +options IEEE80211_SUPPORT_MESH # enable 802.11s draft support +device wlan_wep # 802.11 WEP support +device wlan_ccmp # 802.11 CCMP support +device wlan_tkip # 802.11 TKIP support +device wlan_amrr # AMRR transmit rate control algorithm +device an # Aironet 4500/4800 802.11 wireless NICs. +device ath # Atheros NIC's +device ath_pci # Atheros pci/cardbus glue +device ath_hal # pci/cardbus chip support +options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors +device ath_rate_sample # SampleRate tx rate control for ath +device ral # Ralink Technology RT2500 wireless NICs. +device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. + +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device ether # Ethernet support +device vlan # 802.1Q VLAN support +device tun # Packet tunnel. +device md # Memory "disks" +device gif # IPv6 and IPv4 tunneling +device faith # IPv6-to-IPv4 relaying (translation) +device firmware # firmware assist module + +# The `bpf' device enables the Berkeley Packet Filter. +# Be aware of the administrative consequences of enabling this! +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter + +# Hardware watchdog support. +#device octeon_wdog # Octeon hardware watchdog + +# USB support +options USB_DEBUG # enable debug msgs +device octusb # Cavium Octeon on-board USB interface (USB 2.0) +device uhci # UHCI PCI->USB interface +device ohci # OHCI PCI->USB interface +device ehci # EHCI PCI->USB interface (USB 2.0) +device usb # USB Bus (required) +#device udbp # USB Double Bulk Pipe devices +device uhid # "Human Interface Devices" +device ulpt # Printer +device umass # Disks/Mass storage - Requires scbus and da +device ums # Mouse +device urio # Diamond Rio 500 MP3 player +# USB Serial devices +device u3g # USB-based 3G modems (Option, Huawei, Sierra) +device uark # Technologies ARK3116 based serial adapters +device ubsa # Belkin F5U103 and compatible serial adapters +device uftdi # For FTDI usb serial adapters +device uipaq # Some WinCE based devices +device uplcom # Prolific PL-2303 serial adapters +device uslcom # SI Labs CP2101/CP2102 serial adapters +device uvisor # Visor and Palm devices +device uvscom # USB serial support for DDI pocket's PHS +# USB Ethernet, requires miibus +device aue # ADMtek USB Ethernet +device axe # ASIX Electronics USB Ethernet +device cdce # Generic USB over Ethernet +device cue # CATC USB Ethernet +device kue # Kawasaki LSI USB Ethernet +device rue # RealTek RTL8150 USB Ethernet +device udav # Davicom DM9601E USB +# USB Wireless +device rum # Ralink Technology RT2501USB wireless NICs +device uath # Atheros AR5523 wireless NICs +device ural # Ralink Technology RT2500USB wireless NICs +device zyd # ZyDAS zd1211/zd1211b wireless NICs + +# crypto subsystem +device crypto # core crypto support +device cryptodev # /dev/crypto for access to h/w +device cryptocteon # Octeon coprocessor 2 crypto offload + +# GPIO support +#device gpio + +# PMC support +#device hwpmc
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201310231612.r9NGCKI4043843>