Date: Fri, 15 Mar 2013 13:20:19 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Joshua Isom <jrisom@gmail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Fine, OK, here's my initial AR9380/AR9485 support Message-ID: <CAJ-VmonGxRSq0McQOpB8p61cNo14_nO5H_TAOZac8dpo_cj1-Q@mail.gmail.com> In-Reply-To: <CAJ-VmongS-xwLAhxG4gK4kMTMfFHzLADdTeOMqX5M4vPg79GNw@mail.gmail.com> References: <5142813d.83c2e00a.67a8.39d5@mx.google.com> <514284E5.9060303@gmail.com> <CAJ-Vmok255ODmYaq5FShODzeLt9QvAeNS7Ef-7sVF5_BSoq2Vg@mail.gmail.com> <51428E10.1000801@gmail.com> <CAJ-VmokkXaNHki-yza5hBzUN9z7FhzPH3RbwLsUchm8t5toM0g@mail.gmail.com> <78975985-a190-4915-82b5-b1810d6115b2@email.android.com> <CAJ-VmongS-xwLAhxG4gK4kMTMfFHzLADdTeOMqX5M4vPg79GNw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
... and can you please post a dmesg output, so I can see it actually attaching right? :) Adrian On 15 March 2013 09:00, Adrian Chadd <adrian.chadd@gmail.com> wrote: > Yes, you can't have both ethernet and wireless up on the same L2 > network like that; things will get confused. > > Does it all work fine if you don't have ethernet configured? > > > adrian > > On 15 March 2013 06:52, Joshua Isom <jrisom@gmail.com> wrote: >> I got it all working after removing the driver from the kernelconfig and a >> few other tweaks. I'll post an ugly diff later when I can. I was able to get >> the network working only after I forced the wired down and commented out the >> rc.conf references. DHCP worked but no routing, not even the router. I don't >> know if it's a FreeBSD issue or not. >> >> >> Adrian Chadd <adrian.chadd@gmail.com> wrote: >>> >>> Did you remove ath/ath_hal/ath_rate_sample from your kernel config >>> file when you rebuilt? >>> >>> The default system ships with ath/ath_hal/ath_rate_sample compiled >>> into the kernel rather than as modules. >>> >>> Thanks, >>> >>> >>> >>> Adrian >>> >>> >>> On 14 March 2013 19:57, Joshua Isom <jrisom@gmail.com> wrote: >>>> >>>> On 3/14/2013 9:20 PM, Adrian Chadd wrote: >>>> >>>>> Oh! >>>>> >>>>> http://wikidevi.com/wiki/TP-LINK_TL-WDN4800 >>>>> >>>>> Silly me, I was reading the wrong number on my phone. >>>>> >>>>> Yes, 0x0030 is Osprey (AR9380.) >>>>> >>>>> kldload >>>>> if_ath_pci too. :-) >>>>> >>>>> >>>>> >>>>> Adrian >>>> >>>> >>>> >>>> Something weird happened. My config has ath_pci listed, but then I get >>>> this. >>>> >>>>> [jri:~] root# kldload if_ath_pci >>>>> kldload: can't load if_ath_pci: Exec format error >>>>> [jri:~] root# file /boot/kernel/if_ath_pci.ko >>>>> /boot/kernel/if_ath_pci.ko: ELF 64-bit LSB relocatable, x86-64, version >>>>> 1 >>>>> (FreeBSD), not stripped >>>> >>>> >>>> >>>> Other modules like ath return the standard "already loaded" message.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmonGxRSq0McQOpB8p61cNo14_nO5H_TAOZac8dpo_cj1-Q>