Date: Sat, 5 Aug 2006 23:33:37 +0930 From: Ian Moore <no-spam@swiftdsl.com.au> To: freebsd-questions@freebsd.org Subject: Cups USB workaround was working but now fails Message-ID: <200608052333.44364.no-spam@swiftdsl.com.au>
next in thread | raw e-mail | index | archive | help
--nextPart5803945.JyO59qBnis
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Hi,
When CUPS 1.2.0 came out, I had the same problem as others with port=20
permissions and the USB backend, so I changed my usb device permissions:
crw-rw-rw- 1 root cups 227, 0 Aug 5 22:36 /dev/ulpt0
crw-rw-rw- 1 root cups 227, 64 Aug 5 22:39 /dev/unlpt0
I also edited printers.conf and changed the URI from usb: to file: and I wa=
s=20
able to print without any trouble.
Today, I tried to print something and my printer printed a small amount of =
the=20
page and then just hung with it's power/status light flashing. CUPS reporte=
d=20
the printer was printing.=20
After trying to get it going, I checked printers.conf and found the URI lin=
e=20
was set back to usb:, so I changed it to file: again restarted cupsd, but i=
t=20
wouldn't start.
Looking at the error log, I see:
d [05/Aug/2006:23:18:42 +0930] start_job: filterfds[1]=3D[ 17 20 ]
d [05/Aug/2006:23:18:42 +0930]=20
cupsdStartProcess("/usr/local/libexec/cups/filter/pstoraster", 0x80e1b60,=20
0xbfbef790, 18, 20, 16)
d [05/Aug/2006:23:18:42 +0930] start_job: Closing filter pipes for slot 0 [=
18=20
19 ]...
I [05/Aug/2006:23:18:42 +0930] Started=20
filter /usr/local/libexec/cups/filter/pstoraster (PID 5358) for job 18.
E [05/Aug/2006:23:18:42 +0930] Unable to open output file "file:/dev/unlpt0=
" -=20
Device not configured.
D [05/Aug/2006:23:18:42 +0930] Discarding unused job-completed event...
d [05/Aug/2006:23:18:42 +0930] start_job: Closing filter pipes for slot 0=20
[ -1 -1 ]...
d [05/Aug/2006:23:18:42 +0930] start_job: Closing filter pipes for slot 1 [=
17=20
20 ]...
d [05/Aug/2006:23:18:42 +0930] start_job: Closing status pipes [ 15 16 ]...
d [05/Aug/2006:23:18:42 +0930] cupsdStopJob: id =3D 18, force =3D 0
D [05/Aug/2006:23:18:42 +0930] Discarding unused printer-state-changed=20
event...
d [05/Aug/2006:23:18:42 +0930] cupsdStopJob: printer state is 3
d [05/Aug/2006:23:18:42 +0930] cupsdStopJob: Closing print pipes [ -1 -1 ].=
=2E.
d [05/Aug/2006:23:18:42 +0930] cupsdStopJob: Closing back pipes [ 13 14 ]...
d [05/Aug/2006:23:18:42 +0930] cupsdStopJob: Removing fd 15 from InputSet...
d [05/Aug/2006:23:18:42 +0930] cupsdStopJob: Closing status pipes [ -1 -1 ]=
=2E..
It seems that cups now won't recognise the file: setting, yet previously it=
=20
did. I checked back through my logs to see if a newer cups port had come ou=
t=20
& I'd inadvertently upgraded to it, but it seems that's not the case - it's=
=20
still 1.2.0
Using the usb: URI always gives the same result - the job starts printing b=
ut=20
stops after about 12% and won't go any further.
Any ideas as to why my cups no longer accepts the file: URI?
I'm running FreeBSD 5.11-Release-p2 and my printer is an Epson Stylus C61 o=
n a=20
USB port.
Cheers,
=2D-=20
Ian
gpg key: http://home.swiftdsl.com.au/~imoore/no-spam.asc
--nextPart5803945.JyO59qBnis
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (FreeBSD)
iD8DBQBE1KVAPUlnmbKkJ6ARAm2jAKCPOX85oyqus8JLS/qN+++P7lNeCQCdHooK
Q6kD/dTl/A/7ZbUcPsRrVC8=
=dih2
-----END PGP SIGNATURE-----
--nextPart5803945.JyO59qBnis--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200608052333.44364.no-spam>