Date: Mon, 03 May 2010 19:50:20 +0400 From: newuse@qip.ru To: John Baldwin <jhb@freebsd.org> Cc: freebsd-acpi@freebsd.org Subject: Re: Re: Power OFF button on very old motherboard with FreeBSD 7.2 Message-ID: <2d5fadd89aae7515f91eef66396c00bd8bb63e18@mail.qip.ru> In-Reply-To: <201005031029.32144.jhb@freebsd.org> References: <3f9f8adcca03275eee26921bc0d57aefc4d52f2a@mail.qip.ru> <201005031029.32144.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, I unfortunately have no FreeBSD 4x installation now, but I have f= ind something like I have:=0Ahttp://old.nabble.com/ACPI-error-td22756817= r3.html=0Abut I don't understand how to use it :((=0AI am real new in Fr= eeBSD and any other *nix system :((=0A=0AOn Sunday 02 May 2010 9:12:15 p= m newuse@qip.ru wrote:=0A> Hallow, I am new in any mailing lists and I u= nfortunately don't know how to =0Apost as a followup :((=0A> But ther is= an error in dump:=0A> # acpidump -t=0A> acpidump: Can't find ACPI infor= mation=0A> =0A> I think it is because the dump is not supported by my ke= rnel :(=0A=0AHmm, does acpidump work under 4.x? We have to be able to f= ind the ACPI tables =0Ato support soft-off via the power button.=0A =0A>= On Friday 30 April 2010 2:22:09 pm newuse@qip.ru wrote:=0A> > Can you t= ry booting with 'hint.apic.0.disabled=3D1' set in loader.conf? =0AAlso,= =0A> > if you could obtain a full dmesg that would be helpful.=0A> =0A>= Can you please get the output of acpidump -t and post it to the mailing= list =0A> as a followup?=0A> =0A> > -- =0A> > John Baldwin=0A> > =0A> >= Thank you, I add "hint.apic.0.disabled=3D1" (without "") to the end of= =0A> loader.conf, now it looks like:=0A> > acpi_load=3D"YES"=0A> > apm= _load=3D"YES"=0A> > alias_ftp_load=3D"YES"=0A> > hint.apic.0.disabled=3D= 1=0A> > =0A> > my fulll DMESG:=0A> > # dmesg=0A> > Copyright (c) 1992-20= 09 The FreeBSD Project.=0A> > Copyright (c) 1979, 1980, 1983, 1986, 1988= , 1989, 1991, 1992, 1993, 1994=0A> > The Regents of the Universi= ty of California. All rights reserved.=0A> > FreeBSD is a registered tra= demark of The FreeBSD Foundation.=0A> > FreeBSD 7.2-RELEASE #10: Thu Mar= 25 05:42:27 MSK 2010=0A> > root@NewUse.vesnet.net:/usr/obj/usr/src/= sys/MYKNL=0A> > Timecounter "i8254" frequency 1193182 Hz quality 0=0A> >= CPU: Pentium II/Pentium II Xeon/Celeron (350.80-MHz 686-class CPU)=0A>= > Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2=0A> > Fea= tures=3D0x183f9ff=0A> > real memory =3D 134217728 (128 MB)=0A> > avail= memory =3D 121806848 (116 MB)=0A> > kbd1 at kbdmux0=0A> > ACPI Error (t= bxfroot-0308): A valid RSDP was not found [20070320]=0A> > ACPI: Table i= nitialisation failed: AE_NOT_FOUND=0A> > ACPI: Try disabling either ACPI= or apic support.=0A> > pcib0: pcibus 0 on motherboard=0A> > pir0: on= motherboard=0A> > pci0: on pcib0=0A> > agp0: on hostb0=0A> > pcib1: = at device 1.0 on pci0=0A> > pci1: on pcib1=0A> > isab0: at device 7.0= on pci0=0A> > isa0: on isab0=0A> > atapci0: port 0x1f0-0x1f7,0x3f6,0x= 170-0x177,0x376,0xffa0-0xffaf at device =0A> 7.1 on pci0=0A> > ata0: on= atapci0=0A> > ata0: [ITHREAD]=0A> > ata1: on atapci0=0A> > ata1: [ITHR= EAD]=0A> > uhci0: port 0xde00-0xde1f irq 11 at device 7.2 on pci0=0A> >= uhci0: [GIANT-LOCKED]=0A> > uhci0: [ITHREAD]=0A> > usb0: on uhci0=0A>= > usb0: USB revision 1.0=0A> > uhub0: on usb0=0A> > uhub0: 2 ports wit= h 2 removable, self powered=0A> > intsmb0: port 0x440-0x44f at device 7= .3 on pci0=0A> > intsmb0: intr IRQ 9 enabled revision 0=0A> > intsmb0: [= GIANT-LOCKED]=0A> > intsmb0: [ITHREAD]=0A> > intsmb0: PM I/O mapped 400= =0A> > smbus0: on intsmb0=0A> > smb0: on smbus0=0A> > pcm0: port 0xdc= 00-0xdc3f irq 11 at device 14.0 on pci0=0A> > pcm0: =0A> > pcm0: [ITHREA= D]=0A> > pcm0: =0A> > rl0: port 0xda00-0xdaff mem 0xefffbf00-0xefffbfff= irq 10 at device 16.0 =0Aon =0A> pci0=0A> > miibus0: on rl0=0A> > rlph= y0: PHY 0 on miibus0=0A> > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 10= 0baseTX-FDX, auto=0A> > rl0: Ethernet address: 00:80:48:38:3a:3d=0A> > r= l0: [ITHREAD]=0A> > rl1: port 0xd800-0xd8ff mem 0xefffbe00-0xefffbeff i= rq 9 at device 18.0 on =0A> pci0=0A> > miibus1: on rl1=0A> > rlphy1: P= HY 0 on miibus1=0A> > rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseT= X-FDX, auto=0A> > rl1: Ethernet address: 00:18:e7:09:0f:09=0A> > rl1: [I= THREAD]=0A> > rl2: port 0xd600-0xd6ff mem 0xefffbd00-0xefffbdff irq 11= at device 20.0 =0Aon =0A> pci0=0A> > miibus2: on rl2=0A> > rlphy2: PH= Y 0 on miibus2=0A> > rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX= -FDX, auto=0A> > rl2: Ethernet address: 00:11:95:5b:8e:7a=0A> > rl2: [IT= HREAD]=0A> > cpu0 on motherboard=0A> > pmtimer0 on isa0=0A> > atkbdc0: = at port 0x60,0x64 on isa0=0A> > atkbd0: irq 1 on atkbdc0=0A> > kbd0 at= atkbd0=0A> > atkbd0: [GIANT-LOCKED]=0A> > atkbd0: [ITHREAD]=0A> > fdc0:= at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A> > fdc0: [FILTER]=0A>= > fd0:=0A> > =0A> =0A> -- =0A> John Baldwin=0A> =0A> =0A> =0A=0A-- =0AJ= ohn Baldwin=0A=0A
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2d5fadd89aae7515f91eef66396c00bd8bb63e18>