Date: Sat, 8 Mar 2003 10:57:17 -0500 From: Christopher Rued <c.rued@xsb.com> To: "Eric J. Christeson" <echriste@702com.net> Cc: freebsd-java@FreeBSD.ORG Subject: Re: JDK14 build error -- "must use byte registers if not P6" Message-ID: <15978.4829.180880.226580@ool-18bacefa.dyn.optonline.net> In-Reply-To: <1047133262.26561.16.camel@robin.christeson.net> References: <15977.17607.109088.187779@ool-18bacefa.dyn.optonline.net> <1047133262.26561.16.camel@robin.christeson.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Eric J. Christeson writes: > On Fri, 2003-03-07 at 19:17, Christopher Rued wrote: > > I get the following error when I try to compile jdk14 port: > > > > /usr/ports/java/jdk14/work/control/build/bsd-i586/bin/javah_g -J-XX:ThreadStackSize=768 -jni -bootclasspath /usr/ports/java/jdk14/work/control/build/bsd-i586/classes -d /usr/ports/java/jdk14/work/control/build/bsd-i586/tmp/sun/java.net/net/CClassHeaders/ \ > > java.net.Socket java.net.SocketOptions java.net.SocketImpl java.net.PlainSocketImpl java.net.ServerSocket java.net.InetAddress java.net.Inet4Address java.net.Inet6Address java.net.InetAddressImpl java.net.Inet4AddressImpl java.net.Inet6AddressImpl java.net.NetworkInterface java.net.SocketInputStream java.net.SocketOutputStream java.net.DatagramPacket java.net.DatagramSocket java.net.DatagramSocketImpl java.net.PlainDatagramSocketImpl java.net.MulticastSocket java.net.UnknownHostException java.net.ProtocolException java.lang.Integer java.io.FileDescriptor java.net.InetAddressImplFactory java.net.Inet4AddressImpl java.net.Inet6AddressImpl > > VM option 'ThreadStackSize=768' > > # > > # HotSpot Virtual Machine Error, assertion failure > > # Please report this error at > > # http://java.sun.com/cgi-bin/bugreport.cgi > > # > > # Java VM: Java HotSpot(TM) Client VM (1.4.1-p3-cbr_07_mar_2003_11_48-debug mixed mode) > > # > > # assert(VM_Version::is_P6() || dest- has_byte_register(), "must use byte registers if not P6") > > # > > # Error ID: /usr/ports/java/jdk14/work/hotspot/src/cpu/i486/vm/c1_LIRAssembler_i486.cpp, 1145 > > # > > # Problematic Thread: prio=5 tid=0x0x80b0e18 nid=0x8577400 runnable > > # > > > > Any one else get anything like this??? > > Any idea what is wrong??? > > This is the exact same error I've been getting since patchset2. Are you > trying to build this on an AMD K6? Could you post a dmesg from your > build machine? Yes, this is an AMD K6 II (500 MHz)...jdk13 with hotspot doesn't work either for me :-). Here's tmy /var/run/dmesg.boot: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-PRERELEASE #0: Sat Mar 1 18:58:01 EST 2003 root@ool-18bacefa.dyn.optonline.net:/usr/obj/usr/src/sys/FRANKENSTEIN Timecounter "i8254" frequency 1193182 Hz CPU: AMD-K6(tm) 3D processor (501.14-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> real memory = 402636800 (393200K bytes) config> q avail memory = 387235840 (378160K bytes) Preloaded elf kernel "kernel" at 0xc0428000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc042809c. Preloaded elf module "linux.ko" at 0xc04280ec. K6-family MTRR support enabled (2 registers) md0: Malloc disk Using $PIR table, 5 entries at 0xc00f0d00 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <AcerLabs M1541 (Aladdin-V) PCI host bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <AcerLabs M5243 PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mach64-GB graphics accelerator> at 0.0 chip1: <AcerLabs M15x3 Power Management Unit> at device 3.0 on pci0 isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 rl0: <RealTek 8139 10/100BaseTX> port 0xb800-0xb8ff mem 0xde800000-0xde8000ff irq 3 at device 10.0 on pci0 rl0: Ethernet address: 00:e0:7d:93:ec:cc miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xde000000-0xde0000ff irq 4 at device 11.0 on pci0 rl1: Ethernet address: 00:e0:7d:94:1d:37 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: <AcerLabs Aladdin ATA33 controller> port 0xb000-0xb00f irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 plip0: <PLIP network interface> on ppbus0 pcm0: <OPTi931> at port 0x534-0x537,0x380-0x38b,0x220-0x22f,0xe0c-0xe0f irq 5 drq 0,1 on isa0 AD_WAIT_INIT FAILED 1002000 0xff IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default IPsec: Initialized Security Association Processing. ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master UDMA33 ad2: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at ata1-master WDMA2 acd0: DVD-ROM <SAMSUNG DVD-ROM SD-604> at ata0-slave PIO4 Mounting root from ufs:/dev/ad0s1a To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-java" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15978.4829.180880.226580>