Date: Fri, 18 Oct 2019 01:03:12 +0200 From: Marcin Wojtas <mw@semihalf.com> To: glenn <pygr@sonic.net> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: ClearFog Base serial console on FreeBSD 11.2? Message-ID: <CAPv3WKekue6o65EyBcbbH7nEUxUY4Yc6Mr6cpN-mUUzdJRRJCA@mail.gmail.com> In-Reply-To: <D89D310F-551C-485B-93F8-13C51960A1CC@sonic.net> References: <mailman.1601.1566068907.74383.freebsd-arm@freebsd.org> <D89D310F-551C-485B-93F8-13C51960A1CC@sonic.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Glenn, The release/11.2.0 is missing a huge amount of patches for a38x, which were merged later. However the initial support should work - please try dts from sys/boot/fdt/dts/arm/. At that time the port was not compatible with the Linux bindings from sys/gnu/dts/arm. Please let know if it helped. Best regards, Marcin pt., 18 pa=C5=BA 2019 o 00:40 glenn <pygr@sonic.net> napisa=C5=82(a): > > FreeBSD12.0 and 12.1 can be made to work properly on a ClearFog Base, but= so far, for 11.2, I haven=E2=80=99t been able to get an interactive serial= console after control is passed to the kernel during the boot process. U-b= oot and ubldr.bin seem to work well. > > ... > U-Boot env: loaderdev not set, will probe all devices. > Found U-Boot device: disk > Probing all disk devices... > Checking unit=3D0 slice=3D<auto> partition=3D<auto>... good. > Booting from disk0s3a: > /boot/kernel/kernel data=3D0x82c5e4+0xaba1c syms=3D[0x4+0x8cd30+0x4+0xe2c= 1f] > /boot/dtb/armada-388-clearfog.dtb size=3D0x675c > Loading /boot/defaults/loader.conf > / > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Using DTB from loaded file '/boot/dtb/armada-388-clearfog.dtb'. > Kernel entry at 0xc00100... > Kernel args: (null) > > > > The reason for wanting to get 11.2 working is that, currently, OPNsense d= oesn=E2=80=99t run on 12.0 or 12.1. > > What does it take to get a serial console driver like uart-dev-snps.c to = work with 11.2? > > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPv3WKekue6o65EyBcbbH7nEUxUY4Yc6Mr6cpN-mUUzdJRRJCA>