Date: Fri, 25 Nov 2005 20:05:52 GMT From: Aaron Wallace <awallac3@uiuc.edu> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/89549: [amd64] nve timeouts on 6.0-release Message-ID: <200511252005.jAPK5qTo097801@www.freebsd.org> Resent-Message-ID: <200511252010.jAPKA9j7031448@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 89549 >Category: amd64 >Synopsis: [amd64] nve timeouts on 6.0-release >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Nov 25 20:10:08 GMT 2005 >Closed-Date: >Last-Modified: >Originator: Aaron Wallace >Release: 6.0 Release >Organization: n/a >Environment: >Description: Nvidia nforce4 ethernet controller (nve) gets timeouts during attempts to use ethernet. I can't use the ethernet controller at all. dmesg output follows: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005 root@rat.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2120.03-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> real memory = 1073676288 (1023 MB) avail memory = 1025216512 (977 MB) cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: <memory> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) pci0: <multimedia, audio> at device 4.0 (no driver attached) atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib1: <PCI-PCI bridge> at device 9.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <multimedia, audio> at device 7.0 (no driver attached) pci1: <input device> at device 7.1 (no driver attached) sym0: <1010-33> port 0xc400-0xc4ff mem 0xfeaff000-0xfeaff3ff,0xfeafc000-0xfeafdfff irq 10 at device 8.0 on pci1 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: SCAN AT BOOT disabled for targets 1 2 4 5 8 9 10 11 12 13 14 15. sym0: SCAN FOR LUNS disabled for targets 0 3 6. sym0: [GIANT-LOCKED] sym1: <1010-33> port 0xc000-0xc0ff mem 0xfeafe000-0xfeafe3ff,0xfeafa000-0xfeafbfff irq 11 at device 8.1 on pci1 sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: SCAN AT BOOT disabled for targets 1 2 3 4 5 6 8 9 10 11 12 13 14 15. sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15. sym1: [GIANT-LOCKED] sym2: <810a> port 0xbc00-0xbcff mem 0xfe9ff000-0xfe9ff0ff irq 12 at device 10.0 on pci1 sym2: No NVRAM, ID 7, Fast-10, SE, parity checking sym2: [GIANT-LOCKED] nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xdc00-0xdc07 mem 0xfebfb000-0xfebfbfff irq 10 at device 10.0 on pci0 nve0: Ethernet address 00:50:70:56:4b:68 miibus0: <MII bus> on nve0 ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0 ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nve0: Ethernet address: 00:50:70:56:4b:68 nve0: [GIANT-LOCKED] pcib2: <PCI-PCI bridge> at device 11.0 on pci0 pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 12.0 on pci0 pci3: <PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 13.0 on pci0 pci4: <PCI bus> on pcib4 pcib5: <PCI-PCI bridge> at device 14.0 on pci0 pci5: <PCI bus> on pcib5 pci5: <display, VGA> at device 0.0 (no driver attached) orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd17ff,0xd2000-0xd5fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2120029028 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. acd0: DVDR <PIONEER DVD-RW DVR-106D/1.05> at ata0-slave UDMA33 (probe32:sym2:0:2:0): phase change 6-7 6@3db87198 resid=4. pass4 at sym2 bus 0 target 2 lun 0 pass4: <HP C5110A 3701> Fixed Processor SCSI-2 device pass4: 3.300MB/s transfers da0 at sym0 bus 0 target 0 lun 0 da0: <COMPAQ BF03665223 B014> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit) da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C) da1 at sym0 bus 0 target 3 lun 0 da1: <QUANTUM ATLAS10K2-TY184L DDD6> Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit) da1: 17510MB (35860910 512 byte sectors: 255H 63S/T 2232C) da2 at sym0 bus 0 target 6 lun 0 da2: <IBM IC35L036UWDY10-0 S29A> Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit) da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C) cd0 at sym1 bus 0 target 0 lun 0 cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/da1s1a nve0: link state changed to UP nve0: device timeout (1) nve0: link state changed to DOWN nve0: link state changed to UP nve0: device timeout (2) nve0: link state changed to DOWN nve0: link state changed to UP nve0: device timeout (3) nve0: link state changed to DOWN nve0: link state changed to UP nve0: device timeout (4) nve0: link state changed to DOWN nve0: link state changed to UP >How-To-Repeat: Occurs on any attempt to use nve. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200511252005.jAPK5qTo097801>