Date: Fri, 27 Jul 2007 19:12:11 -0300 From: JoaoBR <joao@matik.com.br> To: Nate Lawson <nate@root.org> Cc: freebsd-acpi@freebsd.org, Michael Nottebrock <lofi@freebsd.org> Subject: Re: powerd freeze with amd 5000 X2 but not with lower cpus Message-ID: <200707271912.11945.joao@matik.com.br> In-Reply-To: <46AA0FEB.2070001@root.org> References: <200707271109.51334.joao@matik.com.br> <46AA0FEB.2070001@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 27 July 2007 12:31:55 Nate Lawson wrote: > JoaoBR wrote: > > Hi > > when I enable powerd with default flags (and any other also) the comput= er > > freezes some seconds after powerd is started. It does not reach login. > > Nothing in the logs. This is with amd 5000 X2 Am2 > > > > When i stick into the same computer a 4600 or 4200 it runs fine and > > smooth. > > > > I thought it is MB related and did the same and again the 5000 cpu > > freeze, the smaller ones not. > > > > Any idea what I should do? > > > > I use releng_6 amd and i386 same story and cpufreq and acpi is compiled. > > Disable powerd again and boot normally. Try changing the frequency with > "sysctl dev.cpu", etc. and see if any of the levels freeze for you. > ok, this is what I get=20 dev.cpu.0.freq_levels: 2600/100000 2400/85596 2200/72544 2000/60778 1800/50= 237=20 1000/25535 no need to say but the fan levels obviously are wrong And now the interesting part I shift to 2400 or any other and immediately=20 freeze, that from kde konsole in single user mode I can shift up and down between all speeds and nothing= =20 happens then I payed more attention when it freezes on start with powerd_enable and= =20 seems it is when the xserver starts I see some similar discussion on stable but I can not match with everything= =20 there because I have the problem only with the athlon 5000 cpu any further idea? =2D-=20 Jo=E3o A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura. Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200707271912.11945.joao>