Date: Fri, 30 May 1997 18:26:26 +0200 (MET DST) From: Andreas Schulz <ats@freebsd.first.gmd.de> To: FreeBSD-gnats-submit@FreeBSD.ORG Subject: kern/3720: Addition for supported Hardware docs Message-ID: <199705301626.SAA10261@freebsd.first.gmd.de> Resent-Message-ID: <199705301620.JAA23115@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 3720 >Category: kern >Synopsis: Addition for supported Hardware >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Class: change-request >Submitter-Id: current-users >Arrival-Date: Fri May 30 09:20:00 PDT 1997 >Last-Modified: >Originator: Andreas Schulz >Organization: GMD-FIRST >Release: FreeBSD 3.0-CURRENT i386 >Environment: FreeBSD-3.0-current as of 27-28 May 97. >Description: The Adaptec 2930 alias/or/and NEC SmartSCSI PCI Card can be added to the supported Hardware. It is a SCSI-PCI Card with BOOT-Prom with the aic7850 Chip onboard and works with the current ahc driver. Sold here in Germany as a Controller Card for the NEC Multispin drives but is really an Adaptec 2930, even the manual and the floppies are original Adaptec. Boot-Messages: ahc0 <Adaptec aic7850 SCSI host adapter> rev 3 int a irq 9 on pci0:5:0 mapreg[10] type=1 addr=0000fc00 size=0100. mapreg[14] type=0 addr=ffbdf000 size=1000. reg16: ioaddr=0xfc00 size=0x100 ahc0: Using left over BIOS settings ahc0: aic7850 Single Channel, SCSI Id=7, 3 SCBs ahc0: Resetting Channel A ahc0: Downloading Sequencer Program...ahc0: 369 instructions downloaded Done ahc0: Probing channel A ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 ahc0: target 0 synchronous at 4.4MHz, offset = 0x8 sd0 at scbus0 target 0 lun 0 sd0: <FUJITSU M2266S-512 001D> type 0 fixed SCSI 2 >How-To-Repeat: >Fix: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199705301626.SAA10261>