Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 20 Nov 2000 07:41:08 -0800 (PST)
From:      Ben Hacker Jr <strbenjr@yahoo.com>
To:        list DC-FBSD <fug-washdc@Sytex.Net>, questions FBSD <freebsd-questions@FreeBSD.ORG>, Stable FBSD <freebsd-stable@FreeBSD.ORG>
Subject:   Help with Sound. FBSDv4.2
Message-ID:  <20001120154108.5591.qmail@web4502.mail.yahoo.com>

next in thread | raw e-mail | index | archive | help
Any help will be greatly appreciated!

(Note: I am not a reader on FreeBSD Questions
list)

I added lines for Sound to my Kernel and 
recompiled.  
Using a text based program to test playing a wav
file.  It says the device is not available or it 
cannot find the device.  I assume it is talking
about the /dev/[sound device]

If this configuration looks good and you suspect
the software, please suggest a better text based 
software I can use to test my sound.  I wanted
to use a CD player but they seem to only want 
SCSI CD Devices.  Mine is IDE.

Below you will find my output from:

  uname -a
  dmesg
  cat /dev/sndstat
  pkg_info

=====$uname -a
FreeBSD localhost 4.2-BETA FreeBSD 4.2-BETA #0:
Mon Nov 20 01:19:27 EST 2000    
strben@localhost:/usr/src/sys/compile/RODNEY-01 
i386

=====$dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
	The Regents of the University of California. All
rights reserved.
FreeBSD 4.2-BETA #0: Mon Nov 20 01:19:27 EST 2000
   
strben@localhost:/usr/src/sys/compile/RODNEY-01
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium/P54C (132.63-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping =
12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 33554432 (32768K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax.  Type `?' for help.
config> di sn0
No such device: sn0
Invalid command or syntax.  Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax.  Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax.  Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax.  Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax.  Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax.  Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax.  Type `?' for help.
config> di bt0
No such device: bt0
Invalid command or syntax.  Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax.  Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax.  Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax.  Type `?' for help.
config> q
avail memory = 29138944 (28456K bytes)
Preloaded elf kernel "kernel" at 0xc03a8000.
Preloaded userconfig_script "/boot/kernel.conf"
at 0xc03a809c.
Intel Pentium detected, installing workaround for
F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI to ISA bridge (vendor=1045
device=c558)> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Trident model 9440 VGA-compatible display
device> at 18.0 irq 10
atapci0: <Generic PCI ATA controller> port
0x3000-0x300f at device 20.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <NEC 765 or clone> at port
0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7
on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE
mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
sbc0: <Soundblaster> at port 0x220-0x22f irq 5
drq 1 flags 0x15 on isa0
pcm1: <SB DSP 2.01> on sbc0
pca0 at port 0x40 on isa0
ad0: 2067MB <IBM-DAQA-32160> [4200/16/63] at
ata0-master PIO4
ad1: 6194MB <SAMSUNG VG36483A> [13424/15/63] at
ata0-slave WDMA2
acd0: CDROM <ICD-900AT> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s1a

=====$cat /dev/sndstat
FreeBSD Audio Driver (newpcm) Nov 20 2000
01:13:44
Installed devices:
pcm1: <SB DSP 2.01> at io 0x220 irq 5 drq 1:5
(1p/1r channels duplex)


=====$pkg_info
bzip2-1.0.1         A block-sorting file
compressor
cvsup-bin-16.1      A general network file
distribution system optimized for CVS
gettext-0.10.35     GNU gettext package
gmake-3.79.1        GNU version of 'make' utility
libtool-1.3.4       Generic shared library
support script
linux_base-6.1      The base set of packages
needed in Linux mode
lynx-ssl-2.8.3.1    A non-graphical, text-based
ssl-enabled World-Wide Web clien
mtools-3.9.6        A collection of tools for
manipulating MSDOS files
wavplay-1.4         A wav player and recorder

=====$That's all folks...   Thanks!!

__________________________________________________
Do You Yahoo!?
Yahoo! Calendar - Get organized for the holidays!
http://calendar.yahoo.com/


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001120154108.5591.qmail>