Date: Tue, 1 Apr 2008 08:13:19 +0100 From: "Stuart Fraser" <stuart@stuartfraser.net> To: <freebsd-current@freebsd.org> Subject: vge(4) driver not working at 1G speeds Message-ID: <0fc501c893c7$dfbf99b0$9f3ecd10$@net>
next in thread | raw e-mail | index | archive | help
Hi, I'm trying to get a Via Velocity Gigabit Networking driver vge(4) to work at 1000baseTX on a Via EPIA SN18000 Motherboard. It will always Auto negotiation and back-off to 100MB Full duplex, which works Perfectly (so far). When I try to manually force the card 1000baseTX the interface status reports 'no carrier' and I can get not connectivity. I have tried Ubuntu live disk and it works seamlessly to 1GB, so I'm sure the cabling/switch etc is fine and the issue is with the driver. So I have tried 1000baseTX full and half duplex. I have tried to disable the hardware handoff using the mediaopt commands -rxcsum and -txcsum. Further I have tried to use the link0 operation as described in the man page but I get: nas# ifconfig vge0 mediaopt link0 ifconfig: SIOCSIFMEDIA (media): Device not configured Further I have tried Release 7.0 and Stable 7 with the vge driver compiled In to the kernel also as an external module loaded through boot/loader.conf and lastly waiting until a full boot has completed and manually loading the if_vge module. The only thing I can see is that the chipset is actually a VT6130 and perhaps the driver needs 'tweaked' or there is some sysctl somewhere to poke it into life. As I say it works fine in 100MB mode and I can use 100M for a while but I'm planning on using this as a NAS so 1G would be preferred. Any help, suggestions, thoughts would be appreciated. Anyone got it working or tried? Should I report it as a bug? Rgds S. _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0fc501c893c7$dfbf99b0$9f3ecd10$>