Date: 13 Jan 2001 13:08:34 -0800 From: bluntman@canada.com To: freebsd-questions@FreeBSD.ORG Subject: I'm stuck.... :( Message-ID: <20010113210834.5315.cpmta@c008.sfo.cp.net>
next in thread | raw e-mail | index | archive | help
OK, so I have no idea what to do now... I can't compile my custom kernel and therefor cannot get my firewall/gateway to work. I would welcome any insight that you may have. Oh and I am not a memeber of the mailing list so please send reply's directly to bluntman@canada.com . Thanx. -=my kernel=- machine i386 cpu I586_CPU ident BAMF maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPDIVERT options TCP_DROP_SYNFIN options TCP_RESTRICT_RST device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapifd # ATAPI floppy drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device # PCI Ethernet NICs that use the common MII bus controller code. device dc0 # DEC/Intel 21143 and various workalikes device dc1 # DEC/Intel Blah blah blah # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device ppp 1 # Kernel PPP pseudo-device tun 1 # Packet tunnel. pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device gif 4 # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) pseudo-device bpf 2 # Berkeley packet filter -=error message after doing "make depend"=- n/umoddi3.c ioconf.c param.c vnode_if.c config.c ../../i386/i386/genassym.c ../../pci/if_dc.c:129: miibus_if.h: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/src/sys/compile/BAMF. Thanx or your time, if you have a solution or insight, please email me @ bluntman@canada.com because I am not a member of the mailing list. __________________________________________________________ Get your FREE personalized e-mail at http://www.canada.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010113210834.5315.cpmta>