Date: Thu, 28 Feb 2013 09:02:19 -0800 From: Tim Kientzle <tim@kientzle.com> To: Brett Wynkoop <wynkoop@wynn.com> Cc: freebsd-arm@freebsd.org Subject: Re: Stuck at the 88 package mark Message-ID: <E484CC0F-9DE0-4298-A103-6FDE293FF9D7@kientzle.com> In-Reply-To: <20130228025525.272a7e92@ivory.wynn.com> References: <20130228025525.272a7e92@ivory.wynn.com>
next in thread | previous in thread | raw e-mail | index | archive | help
"armv6" is not a standard architecture recognized by GNU binutils. You probably just need to override that to use "arm". Tim On Feb 27, 2013, at 11:55 PM, Brett Wynkoop wrote: > Greeting- > > My build of zoneminder died in /usr/ports/devel/binutils. Before I dig > too deep has someone already solved this one? > > checking for lwpstatus_t.pr_reg in sys/procfs.h... no > checking for lwpstatus_t.pr_fpreg in sys/procfs.h... no > checking for win32_pstatus_t in sys/procfs.h... no > checking linker --as-needed support... yes > checking for cos in -lm... yes > *** BFD does not support target armv6-portbld-freebsd10.0. > *** Look in bfd/config.bfd for supported targets. > *** [configure-bfd] Error code 1 > > Stop in /export/ports/devel/binutils/work/binutils-2.23.1. > *** [all] Error code 1 > > Stop in /export/ports/devel/binutils/work/binutils-2.23.1. > > I suspect it is just a matter of putting the right thing in for the > supported target, but I am not sure what to put there? There is some > arm stuff in bfd/config.bfd. > > So if someone has solved this let me know. If someone knows what I > might want to put in the config file that would be good too. I am > looking for something that will be generic to Pi/Bone/Plug/You-get-me! > > Thanks! > > -Brett > -- > > wynkoop@wynn.com http://prd4.wynn.com/wynkoop/pgp-keys.txt > 917-642-6925 > 718-717-5435 > > I would never invade the United States. There would be a gun behind > every blade of grass. --Isoroku Yamamoto > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E484CC0F-9DE0-4298-A103-6FDE293FF9D7>