Date: Thu, 15 Mar 2007 21:55:21 -0600 From: Aaron Siegel <bulk_mail@siegel-tech.net> To: freebsd-questions@freebsd.org Subject: CD burning problem Message-ID: <200703152155.21957.bulk_mail@siegel-tech.net>
next in thread | raw e-mail | index | archive | help
Hello
I am unable to burn cd with my new Sony DVD-RW. I have been fighting with t=
his=20
for month. Sorry for have to post this message for such a basic task, Bello=
w=20
is the error message that is produced by cdrecord=20
Thank you
Aaron
<root@ballboy># cdrecord -scanbus
Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 J=F6r=
g=20
Schilling
Using libscg version 'schily-0.8'.
scsibus1:
1,0,0 100) 'SONY ' 'DVD RW DRU-820A ' '1.0b' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
<root@ballboy># cdrecord dev=3D1,0,0 k3b_image.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent=20
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 J=F6r=
g=20
Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :=20
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-820A '
Revision : '1.0b'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support co=
de.
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for=20
cdrecord-ProDVD.
cdrecord: Free test versions and free keys for personal use are at=20
ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE=20
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Starting to write CD/DVD at speed 40 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Turning BURN-Free off
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 01 55 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 4F 85 00 00 08 03 00 00 00 00 00 00 00=
00=20
00 00 00 00 00 00 00 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error=20
(ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)=20
cmd finished after 18.206s timeout 40s
write track data: error after 698368 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable=
=20
error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 00 00 00=
00=20
00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)=20
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
cdrecord: Cannot fixate disk.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200703152155.21957.bulk_mail>