Date: Wed, 26 Jun 2013 07:51:44 +0200 From: Andre Albsmeier <Andre.Albsmeier@siemens.com> To: Boris Samorodov <bsam@passap.ru> Cc: "freebsd-multimedia@freebsd.org" <freebsd-multimedia@freebsd.org> Subject: Re: How to change probe order of HDA sound devices? Message-ID: <20130626055144.GA1389@bali> In-Reply-To: <51C984EA.1060603@passap.ru> References: <20130625110115.GA1525@bali> <51C984EA.1060603@passap.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 25-Jun-2013 at 13:54:18 +0200, Boris Samorodov wrote: > 25.06.2013 15:01, Andre Albsmeier пишет: > > I replaced my old non-sound capable graphics card with a new one > > (Nvidia GeForce GT 610). > > > > Now all the sound hardware of this new card gets probed _before_ > > my standard sound device (Realtek), shifting the latter from > > hdac0 to hdac1: > > > > hdac0: <NVIDIA GF119 HDA Controller> mem 0xfea7c000-0xfea7ffff irq 17 at device 0.1 on pci8 > > ... > > hdac1: <Intel 82801G HDA Controller> mem 0xfebfc000-0xfebfffff irq 19 at device 27.0 on pci0 > > ... > > hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0 > > hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0 > > pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 4 on hdaa0 > > pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0 > > hdacc1: <Realtek ALC882 HDA CODEC> at cad 0 on hdac1 > > hdaa1: <Realtek ALC882 Audio Function Group> at nid 1 on hdacc1 > > pcm2: <Realtek ALC882 (Rear Analog)> at nid 21 and 26 on hdaa1 > > pcm3: <Realtek ALC882 (Rear Analog)> at nid 20 and 24 on hdaa1 > > pcm4: <Realtek ALC882 (Analog)> at nid 22 and 28 on hdaa1 > > pcm5: <Realtek ALC882 (Rear Analog Line-out)> at nid 23 on hdaa1 > > pcm6: <Realtek ALC882 (Front Analog Headphones)> at nid 27 on hdaa1 > > pcm7: <Realtek ALC882 (Rear Digital)> at nid 30 on hdaa1 > > > > How can I get back the old behaviour so that the Realktek > > card will sit on hdac0? Tried the usual suspects like > > > > hint.hdacc.0.at=hdac1 > > hint.hdacc.1.at=hdac0 > > > > but this didn't work. > > Maybe you just need to change the default? > ----- > sysctl hw.snd.default_unit=1 > ----- As said before this doesn't help since I need the same pcmX, dspX and mixerX devices as without the Nvidia card. However, I fixed it by simply disabling the whole Nvidia crap: hint.hdac.0.cad0.nid4.config="as=0" hint.hdac.0.cad0.nid5.config="as=0" hint.hdac.0.cad0.nid6.config="as=0" hint.hdac.0.cad0.nid7.config="as=0" This doesn't make the Realtek probe before Nvidia but all pcm, dsp and mixer devices sit where they have been before and that's what I need. Thanks anyway, -Andre
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20130626055144.GA1389>