Date: Sun, 22 Nov 1998 07:55:44 +0200 (IST) From: INGRP Avi Inbar 5292 <avi.inbar@telrad.co.il> To: questions@FreeBSD.ORG Cc: support@cdrom.com Subject: Problem in installing the FreeBSD package Message-ID: <Pine.HPP.3.96.981122074300.2255A-100000@tainh16>
next in thread | raw e-mail | index | archive | help
Hi, Mr Phil Jenvey from the support group addressed me to the FreeBSD mailing list to try and get more help. The problem is that the FreeBSD installation in the PC can not detect the CDROM. Following is the detailed description and clarification email on the subject. Please try to look at it and maybe help with a solution. Regards Avi Inbar ---------- Forwarded message ---------- Date: Fri, 20 Nov 1998 16:44:13 -0800 (PST) From: Phil Jenvey <support@cdrom.com> To: INGRP Avi Inbar 5292 <avi.inbar@elex.co.il> Subject: Re: Problem in installing the FreeBSD package III There may be some type of incompatibility problems with your hardware and the freebsd ATAPI drivers. You should post these errors to one of FreeBSD mailing lists for more in depth help. questions@freebsd.org is a good place to start. On Tue, 17 Nov 1998, INGRP Avi Inbar 5292 wrote: > Hi, > > The system detection file is a DetLog file which is created by > Windows 95 when operating Hardware Detection in the PC. > > The CDROM is ATAPI compliant. I tried to also check a CDROM: > Matsushita - kotobuki model CR-588-B which is also ATAPI compliant, > and the BSD could not detect the CDROM. > > I tried to configure the CDROMs as Master or Slave, and it did > not help. > > The CDROMs are 32x speed ( more then the double speed). I use the > BSD 2.2.7 version. > > Regards > Avi Inbar > > ---------- Forwarded message ---------- > Date: Wed, 4 Nov 1998 13:27:00 -0800 (PST) > From: Phil Jenvey <support@cdrom.com> > To: INGRP Avi Inbar 5292 <avi.inbar@elex.co.il> > Subject: Re: Problem in installing the FreeBSD package II > > What is this system detection file? > > As for the CDROM, make sure it is ATAPI compliant. If this is true, > try moving it to the master or slave portion of your IDE controller. > > As for the mouse, what IRQ is it set to? Is that the same IRQ that the > psm0 device is set to in the Visual Configuration Editor? > > On Sun, 1 Nov 1998, INGRP Avi Inbar 5292 wrote: > > > Hi, > > > > I did install the FreeBSD package from a DOS partition. > > > > The FreeBSD still does not detect the mouse and the CDROM. > > > > As listed in the enclosed System Detection file: > > > > - The CDROM is detected on *PNP0600\0001 = [5] Standard IDE/ESDI > > > > - The mouse is detected on: > > > > Checking for: PS/2 Style Mouse > > QueryIRQDMA: Caller=DETECTPS2MOUSE, rcQuery=0 > > IRQ=12 > > QueryIOMem: Caller=DETECTPS2MOUSE, rcQuery=0 > > IO=310-311 > > > > when I try to configure the kernel accordingly, there is a > > page fault during startup. > > > > Your help is needed of how to configure the kernel so that the > > mouse and the CDROM will be operable. > > > > Regards > > Avi Inbar > > > > ---------- Forwarded message ---------- > > Date: Wed, 21 Oct 1998 16:22:55 +0200 (IST) > > From: INGRP Avi Inbar 5292 <ainbar@cpm.elex.co.il> > > To: support@cdrom.com > > Subject: Problem in installing the FreeBSD package > > > > Hi, > > > > I got the FreeBSD package last week and tried to install it. > > > > In the PC there two discs: > > 1. A primary disc : 3.1 GigaBytes, 2 partitions C: 2 GigaBytes > > D: 1.1 GigaBytes. > > 2. A secondary disc: 4.1 GigaBytes, 3 partitions 2 , 1 and 1.1 GigaBytes > > > > I intend to install the FreeBSD in the primary disc in partition D. > > > > Trying to install the system from a floppy I ran into a problem to > > reconfigure the system. I tried to reconfigure the parameters in > > accordance with the System Detection file, but I got fatal errors > > during start up, or an error that the CD ROM can not be located during > > the install procedure. > > > > Following is a copy of the System Detection file . > > > > It looks like the CD ROM and *PNP0600\0001 = [5] Standard IDE/ESDI > > Hard Disk Controller are using the same IRQ and address. > > > > Please help me with instructions of which parameters to put in the > > boot configuration to overcome the problem. > > > > --------------------------------------------------- > > [System Detection: 10/16/98 - 19:04:28] > > Parameters "", InfParams "", Flags=01102003 > > SDMVer=0400.950, WinVer=07000400, Build=04.00.950, WinFlags=00002c29 > > RegAvoidRes: UMB\0000 > > Mem=c95b0-d05cf(ffffffff:0:0) > > RegAvoidRes: UMB\0001 > > Mem=d05d0-effff(ffffffff:0:0) > > LogCrash: crash log not found or invalid > > Detected: *PNP0C01\0000 = [1] System board > > Checking for: System Bus > > CheckInt86xCrash: int 1a,AX=b101,rc=0 > > SetVar: PCIBUS= > > Detected: *PNP0C00\0000 = [2] Plug and Play BIOS > > SetVar: PNPBIOS= > > Detected: *PNP0C05\0000 = [3] Advanced Power Management support > > Detected: *PNP0F01\0000 = [4] Microsoft Serial Mouse > > Detected: *PNP0600\0001 = [5] Standard IDE/ESDI Hard Disk Controller > > IO=170-177,376-376 > > IRQ=15 > > VerifyHW: manual device printer\0000: HP DeskJet 690C Series Printer > > VerifyHW: manual device Ports\0000: Communications Port (COM2) > > VerifyHW: manual device MDMGEN\COM2: Standard Modem > > VerifyHW: manual device Net\0000: Dial-Up Adapter > > Devices verified: 5 > > ConfigMG device: HTREE\RESERVED\0 > > ConfigMG device: ROOT\*PNP0C01\0000 > > ConfigMG device: ROOT\*PNP0C00\0000 > > ConfigMG device: skip ForceHWVerify device ROOT\*PNP0C00\0000 > > ConfigMG device: BIOS\*PNP0C01\00 > > RegAvoidRes: *PNP0C01\0001 > > Mem=0-9ffff(ffffffff:0:3),e0000-fffff(ffffffff:0:2) > > ConfigMG device: BIOS\*PNP0000\01 > > RegAvoidRes: *PNP0000\0000 > > IO=20-21(ffff:0:0),a0-a1(ffff:0:0) > > IRQ=2 > > ConfigMG device: BIOS\*PNP0200\02 > > RegAvoidRes: *PNP0200\0000 > > IO=0-f(ffff:0:0),80-90(ffff:0:0),94-9f(ffff:0:0),c0-de(ffff:0:0) > > DMA=4 > > ConfigMG device: BIOS\*PNP0100\03 > > RegAvoidRes: *PNP0100\0000 > > IO=40-43(ffff:0:0) > > IRQ=0 > > ConfigMG device: BIOS\*PNP0B00\04 > > RegAvoidRes: *PNP0B00\0000 > > IO=70-71(ffff:0:0) > > IRQ=8 > > ConfigMG device: BIOS\*PNP0303\05 > > RegAvoidRes: *PNP0303\0000 > > IO=60-60(ffff:0:0),64-64(ffff:0:0) > > IRQ=1 > > ConfigMG device: BIOS\*PNP0800\06 > > RegAvoidRes: *PNP0800\0000 > > IO=61-61(ffff:0:0) > > ConfigMG device: BIOS\*PNP0C04\07 > > RegAvoidRes: *PNP0C04\0000 > > IO=f0-ff(ffff:0:0) > > IRQ=13 > > ConfigMG device: BIOS\*PNP0A03\08 > > ConfigMG device: PCI\VEN_8086&DEV_7100\BUS_00&DEV_00&FUNC_00 > > ConfigMG device: PCI\VEN_8086&DEV_7110\BUS_00&DEV_07&FUNC_00 > > ConfigMG device: ISAPNP\READDATAPORT\0 > > RegAvoidRes: READDATAPORT\0000 > > IO=270-273(ffff:0:0) > > ConfigMG device: ISAPNP\CTL0070_DEV0000\FFFFFFFF > > RegAvoidRes: *CTL0001\0000 > > IO=220-22f(ffff:0:0),330-331(ffff:0:0),388-38b(ffff:0:0) > > IRQ=5 > > DMA=1,5 > > ConfigMG device: ISAPNP\CTL0070_DEV0001\FFFFFFFF > > RegAvoidRes: *CTL7001\0000 > > IO=200-207(ffff:0:0) > > ConfigMG device: PCI\VEN_8086&DEV_7111\BUS_00&DEV_07&FUNC_01 > > RegAvoidRes: VEN_8086&DEV_7111&REV_01\0000 > > > > IO=1f0-1f7(3ff:400:0),3f6-3f6(3ff:400:0),ffa0-ffa7(ffff:ffff:0),ffa8-ffaf(ffff:ffff:0) > > IRQ=14 > > ConfigMG device: > > MF\CHILD0000\PCI&VEN_8086&DEV_7111&BUS_00&DEV_07&FUNC_01 > > RegAvoidRes: BADPRIMARY\0000 > > IO=1f0-1f7(3ff:400:0),3f6-3f6(3ff:400:0) > > IRQ=14 > > ConfigMG device: ES > > DI\GENERIC_IDE__DISK_TYPE47_\MF&CHILD0000&PCI&VEN_8086&DEV_711 > > 1&BUS_00&DEV_07&FUNC_0100 > > ConfigMG device: ES > > DI\GENERIC_IDE__DISK_TYPE47_\MF&CHILD0000&PCI&VEN_8086&DEV_711 > > 1&BUS_00&DEV_07&FUNC_0110 > > ConfigMG device: > > MF\CHILD0001\PCI&VEN_8086&DEV_7111&BUS_00&DEV_07&FUNC_01 > > ConfigMG device: > > MF\CHILD0001\PCI&VEN_8086&DEV_7111&BUS_00&DEV_07&FUNC_01: Sta > > tus=20620, Problem=1d > > ConfigMG device: PCI\VEN_8086&DEV_7112\BUS_00&DEV_07&FUNC_02 > > ConfigMG device: PCI\VEN_8086&DEV_7112\BUS_00&DEV_07&FUNC_02: Sta > > tus=620, Problem=1d > > ConfigMG device: PCI\VEN_8086&DEV_7113\BUS_00&DEV_07&FUNC_03 > > ConfigMG device: PCI\VEN_5333&DEV_5631\BUS_00&DEV_0B&FUNC_00 > > RegAvoidRes: VEN_5333&DEV_5631&REV_06\0000 > > IO=3b0-3bb(3ff:400:0),3c0-3df(3ff:400:0) > > Mem=c0000-c7fff(ffffffff:0:0),a0000-affff(ffffffff:0:1),b0000- > > bffff(ffffffff:0:1),f8000000-fbffffff(ffffffff:0:1) > > ConfigMG device: MONITOR\DEFAULT_MONITOR\0001 > > ConfigMG device: BIOS\*PNP0501\09 > > RegAvoidRes: *PNP0501\0000 > > IO=3f8-3ff(ffff:0:0) > > IRQ=4 > > ConfigMG device: BIOS\*PNP0400\0A > > RegAvoidRes: *PNP0400\0000 > > IO=378-37f(ffff:0:0) > > IRQ=7 > > ConfigMG device: BIOS\*PNP0700\0B > > RegAvoidRes: *PNP0700\0000 > > IO=3f0-3f5(ffff:0:0) > > IRQ=6 > > DMA=2 > > ConfigMG device: FLOP\GENERIC_NEC__FLOPPY_DISK_\BIOS&*PNP0700&0B00 > > ConfigMG device: BIOS\*PNP0C02\0C > > RegAvoidRes: *PNP0C02\0000 > > > > IO=4d0-4d1(ffff:0:0),cf8-cff(ffff:0:0),3f7-3f7(ffff:0:0),6100-613f(ffff:0:0),5f00- > > 5f0f(ffff:0:0),108-109(ffff:0:0) > > Mem=fffe0000-ffffffff(ffffffff:0:2),100000-1ffffff(ffffffff:0:3) > > ConfigMG device: ROOT\*PNP0C05\0000 > > ConfigMG device: ROOT\*PNP0F01\0000 > > ConfigMG device: ROOT\*PNP0600\0001 > > RegAvoidRes: *PNP0600\0000 > > IO=170-177(3ff:0:0),376-376(3ff:0:0) > > IRQ=15 > > ConfigMG device: SCSI\LITEON__CD- > > ROM_LTN242___H\ROOT&*PNP0600&000100 > > ConfigMG device: ROOT\PRINTER\0000 > > ConfigMG device: ROOT\PORTS\0000 > > RegAvoidRes: *PNP0500\0000 > > IO=2f8-2ff(ffff:0:0) > > IRQ=3 > > ConfigMG device: ROOT\MDMGEN\COM2 > > ConfigMG device: ROOT\NET\0000 > > ConfigMG device: NETWORK\MSTCP\0000 > > Checking for: Manual Devices > > Checking for: Programmable Interrupt Controller > > QueryIOMem: Caller=DETECTPIC, rcQuery=2 > > IO=20-21,a0-a1 > > Checking for: Direct Memory Access Controller > > QueryIOMem: Caller=DETECTDMA, rcQuery=1 > > IO=0-f,81-83,87-87,89-8b,8f-8f,c0-df > > Checking for: System CMOS/Real Time Clock > > QueryIOMem: Caller=DETECTCMOS, rcQuery=2 > > IO=70-71 > > Checking for: System Timer > > QueryIOMem: Caller=DETECTTIMER, rcQuery=2 > > IO=40-43 > > Checking for: System Speaker > > QueryIOMem: Caller=DETECTSPEAKER, rcQuery=2 > > IO=61-61 > > Checking for: Numeric Data Processor > > QueryIOMem: Caller=DETECTNDP, rcQuery=2 > > IO=f0-ff > > Checking for: Logitech SoundMan > > Checking for: System Board > > Checking for: Motherboard Resources > > Checking for: Keyboard > > QueryIOMem: Caller=DETECTKBD, rcQuery=2 > > IO=60-60,64-64 > > Checking for: Intel 596 compatible Network Adapter > > Checking for: HP Omnibook 600 series > > Checking for: System Bus > > CheckInt86xCrash: int 1a,AX=b101,rc=0 > > SetVar: PCIBUS= > > Checking for: Advanced Power Management Support > > Checking for: Dockable Portable > > Checking for: PS/2 Style Mouse > > QueryIRQDMA: Caller=DETECTPS2MOUSE, rcQuery=0 > > IRQ=12 > > QueryIOMem: Caller=DETECTPS2MOUSE, rcQuery=0 > > IO=310-311 > > Checking for: ATI Ultra Pro Turbo (Mach 64) Display Adapter > > QueryIOMem: Caller=DETECTMACH64, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: ATI Ultra Pro/Plus (Mach 32) Display Adapter > > QueryIOMem: Caller=DETECTMACH32, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: ATI Ultra (Mach 8) Display Adapter > > QueryIOMem: Caller=DETECTMACH8, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Cirrus Logic Memory-mapped Display Adapter > > QueryIOMem: Caller=DETECTCIRRUSMMAPPED, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Cirrus Logic Laptop VGA Display Adapter > > QueryIOMem: Caller=DETECTCIRRUSLAPTOP, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Cirrus Logic VGA Display Adapter > > QueryIOMem: Caller=DETECTCIRRUSDESKTOP, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: S3 801/805/928/864/964 Display Adapter > > QueryIOMem: Caller=DETECTS3801, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: S3 Display Adapter > > QueryIOMem: Caller=DETECTS3, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Western Digital VGA Display Adapter > > QueryIOMem: Caller=DETECTWDDESKTOP, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Western Digital Laptop VGA Display Adapter > > QueryIOMem: Caller=DETECTWDLAPTOP, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: XGA Display Adapter > > QueryIOMem: Caller=DETECTXGA, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: XGA/2 Display Adapter > > QueryIOMem: Caller=DETECTXGA2, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Tseng Labs W32 Display Adapter > > QueryIOMem: Caller=DETECTTSENGW32, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Tseng Labs Display Adapter > > QueryIOMem: Caller=DETECTTSENGW128, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Compaq Qvision Display Adapter > > QueryIOMem: Caller=DETECTQV, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Compaq Advanced VGA Display Adapter > > QueryIOMem: Caller=DETECTAVGA, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Chips & Technology Accelerated Display Adapter > > QueryIOMem: Caller=DETECTCT545, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Matrox MGA Display Adapter > > QueryIOMem: Caller=DETECTMATROX, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Compaq Qvision 2000 Display Adapter > > QueryIOMem: Caller=DETECTCPQ2000, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Tseng Labs ET4000 Display Adapter > > QueryIOMem: Caller=DETECTTSENG, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: ATI VGA Wonder Display Adapter > > QueryIOMem: Caller=DETECTWONDER, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Oak Technology VGA Display Adapter > > QueryIOMem: Caller=DETECTOAK, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Trident VGA Display Adapter > > QueryIOMem: Caller=DETECTTRIDENT, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Chips & Technology Super VGA Display Adapter > > QueryIOMem: Caller=DETECTCTSVGA, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Video Seven VGA Display Adapter > > QueryIOMem: Caller=DETECTV7, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Standard VGA Display Adapter > > QueryIOMem: Caller=DETECTVGA, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Default Standard VGA Display Adapter > > QueryIOMem: Caller=DETECTASSUMEVGA, rcQuery=2 > > IO=3b0-3bb,3c0-3df > > Checking for: Ungermann Bass NIUPC Network Adapter > > NCD: detecting net card *pnp811c > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=4 > > IO=380-38f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=2 > > IO=220-22f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=4 > > IO=200-20f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=0 > > IO=210-21f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=0 > > IO=230-23f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=0 > > IO=240-24f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=0 > > IO=250-25f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=0 > > IO=260-26f > > QueryIOMem: Caller=DETECTUBNIUPC, rcQuery=4 > > IO=270-27f > > Checking for: Ungermann Bass PCNIU Network Adapter > > NCD: detecting net card *pnp8119 > > Checking for: Ungermann Bass PCNIUEX128 Network Adapter > > NCD: detecting net card *pnp811a > > Checking for: Ungermann Bass PCNIUEX512 Network Adapter > > NCD: detecting net card *pnp811b > > Checking for: Ungermann Bass NIUPCTR Network Adapter > > NCD: detecting net card *pnp811f > > Checking for: Ungermann Bass PCNIC Network Adapter > > NCD: detecting net card *pnp811e > > Checking for: Ungermann Bass NIUPCEOTP Network Adapter > > NCD: detecting net card *pnp8120 > > Checking for: DEC DEPCA Network Adapter > > NCD: detecting net card *pnp80e7 > > QueryIOMem: Caller=DETECTDECDEPCA, rcQuery=0 > > IO=300-30f > > QueryIOMem: Caller=DETECTDECDEPCA, rcQuery=4 > > IO=200-20f > > Checking for: DEC DEPCAJR Network Adapter > > NCD: detecting net card *pnp80e8 > > QueryIOMem: Caller=DETECTDECDEPCAJR, rcQuery=0 > > ------------------------------------------- > > > > Regards > > Avi Inbar > > > > > > > > > > -- > Phil Jenvey > Technical Support > Walnut Creek CDROM > -- Phil Jenvey Technical Support Walnut Creek CDROM To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.HPP.3.96.981122074300.2255A-100000>