Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 25 Dec 1999 20:19:00 +0100
From:      Ollivier Robert <roberto@keltia.freenix.fr>
To:        FreeBSD mobile Mailing List <mobile@freebsd.org>
Subject:   PCMCIA modem Toshiba not working [3.3-STABLE]
Message-ID:  <19991225201859.A40332@keltia.freenix.fr>

next in thread | raw e-mail | index | archive | help
I have some trouble making my laptop (Sony VAIO Z505SX) recognise my Toshiba
modem. It is one called SlimV90 and it always fails with "driver allocation
failed for TOSHIBA". Any idea ?

Here is the pccard.conf entry I use:

-=-=-
# Generally available IO ports
io      0x240-0x360 0x3e8 0x2e8
# Generally available IRQs (Built-in sound-card owners remove 5)
irq     3 4 5 10 11 13 
# Available memory slots
memory  0xd4000  96k
[...]
# 3Com/USR/Toshiba SLIMV90
card "TOSHIBA" "SLIMV90"
        config 0x3 "sio2" ?
        insert echo Toshiba PCMCIA V90 modem inserted
        remove echo Toshiba PCMCIA V90 modem removed
-=-=-

and here is the output of dumpcis:
-=-=-
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
    000:  d1 00 ff
	Common memory device information:
		Device number 1, type Function specific, WPS = OFF
		Speed = 250nS, Memory block size = 512b, 1 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
    000:  61 08 ff
	Attribute memory device information:
		Device number 1, type SRAM, WPS = OFF
		Speed = 250nS, Memory block size = 512b, 2 units
Tuple #3, code = 0x15 (Version 1 info), length = 42
    000:  04 01 54 4f 53 48 49 42 41 00 53 4c 49 4d 56 39
    010:  30 00 52 45 56 23 31 20 30 00 34 54 31 32 39 30
    020:  30 30 30 30 30 4c 58 58 00 ff
	Version = 4.1, Manuf = [TOSHIBA],card vers = [SLIMV90]
	Addit. info = [REV#1 0],[4T129000000LXX]
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
    000:  ff ff 01 01
	PCMCIA ID = 0xffff, OEM ID = 0x101
Tuple #5, code = 0x21 (Functional ID), length = 2
    000:  02 00
	Serial port/modem
Tuple #6, code = 0x22 (Functional EXT), length = 4
    000:  00 02 0f 5c
	Serial interface extension:
		16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #7, code = 0x22 (Functional EXT), length = 9
    000:  05 1f 0f 00 02 00 00 02 00
	Modem interface capabilities:
Tuple #8, code = 0x22 (Functional EXT), length = 9
    000:  06 1f 0f 00 30 00 00 30 00
	Modem interface capabilities:
Tuple #9, code = 0x22 (Functional EXT), length = 13
    000:  02 0c 00 3f 1c 03 03 0f 07 00 01 b5 ff
	Data modem services available:
Tuple #10, code = 0x22 (Functional EXT), length = 9
    000:  13 01 00 1f 00 7a 00 b5 ff
Tuple #11, code = 0x22 (Functional EXT), length = 8
    000:  23 01 00 1f 00 00 00 b5
Tuple #12, code = 0x1a (Configuration map), length = 5
    000:  01 04 e0 07 07
	Reg len = 2, config register addr = 0x7e0, last config = 0x4
	Registers: XXX----- 
Tuple #13, code = 0x1b (Configuration entry), length = 23
    000:  c1 81 7d 78 2d 26 36 2d e8 14 5f aa 60 f8 03 07
    010:  b0 bc 86 48 10 f0 ff
	Config index = 0x1(default)
	Interface byte = 0x81 (I/O)  wait signal supported
	Vcc pwr:
		Continuous supply current: 2.5 x 10mA
		Max current average over 1 second: 2 x 100mA
		Max current average over 10 ms: 3 x 100mA
		Power down supply current: 2.5 x 10mA
	Wait scale Speed = 1.2 x 10 us
	RDY/BSY scale Speed = 1.2 x 10 us, scaled by 100
	Card decodes 20 address lines
		IRQ modes:
		IRQs:  BERR 2 4 8 9 10 11 12 14
	Memory descriptor 1
		 card addr = 0xb00703f800
Tuple #14, code = 0x1b (Configuration entry), length = 7
    000:  02 08 aa 60 f8 02 07
	Config index = 0x2
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #15, code = 0x1b (Configuration entry), length = 7
    000:  03 08 aa 60 e8 03 07
	Config index = 0x3
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #16, code = 0x1b (Configuration entry), length = 7
    000:  04 08 aa 60 e8 02 07
	Config index = 0x4
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #17, code = 0x1b (Configuration entry), length = 5
    000:  05 08 aa 40 07
	Config index = 0x5
	Card decodes 10 address lines, 8 Bit I/O only
		I/O address # 1:  block length = 0x8
Tuple #18, code = 0xff (Terminator), length = 83
    000:  4c 49 4d 56 39 30 20 50 53 54 4e 2f 49 53 44 4e
    010:  20 44 61 74 61 2f 46 61 78 20 28 43 29 20 54 6f
    020:  73 68 69 62 61 20 53 59 53 54 45 4d 53 20 46 72
    030:  00 0c 58 2c 94 48 10 2a 01 02 28 28 e0 93 02 04
    040:  08 06 08 86 38 05 88 00 64 86 42 05 00 03 4c 46
    050:  0e bc 84
1 slots found
-=-=-
-- 
Ollivier ROBERT -=- FreeBSD: The Power to Serve! -=- roberto@keltia.freenix.fr
FreeBSD keltia.freenix.fr 4.0-CURRENT #75: Tue Nov  2 21:03:12 CET 1999



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991225201859.A40332>