Date: Thu, 11 Apr 2002 18:11:15 -0700 From: "Marcus Beaman" <marcus.beaman@state.or.us> To: <freebsd-smp@freebsd.org> Subject: Another Motherboard Success Message-ID: <MMEPLEIAKBGICDPPJENCGECECBAA.marcus.beaman@state.or.us>
next in thread | raw e-mail | index | archive | help
I've successfully run SMP FreeBSD on an ASUS A7M266-D motherboard with a
GENERIC.MP and custom(NETFLOW.MP) kernel. One important note, I had to set the
motherboard to jumperfree mode (motherboard FSB is preset to operate at 133MHZ
in regular jumper mode, and jumperfree mode allows processor setting via BIOS
setup). If I did not have it in jumperfree mode, P0 processor would randomly
hang with an unkillable process rendering it useless but the P1 processor
continued to work and no syslog messages were generated.
uname -a:
FreeBSD xxx.xxx.xxx 4.5-RELEASE FreeBSD 4.5-RELEASE #0: Tue Mar 12 13:35:32 PST
2002 root@xxx.xxx.xxx:/usr/src/sys/compile/NETFLOW.MP i386
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Tue Mar 12 13:35:32 PST 2002
root@xxx.xxx.xxx:/usr/src/sys/compile/NETFLOW.MP
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP 1900+ (1202.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<<b19>,AMIE,DSP,3DNow!>
real memory = 2147401728 (2097072K bytes)
avail memory = 2088636416 (2039684K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02fc000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02fc09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f1370
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 16 -> irq 2
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1022 device=700d)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G550 AGP graphics accelerator> at 5.0 irq 2
isab0: <PCI to ISA bridge (vendor=1022 device=7440)> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xd800-0xd80f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
chip1: <PCI to Other bridge (vendor=1022 device=7443)> at device 7.3 on pci0
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xd400-0xd4ff mem
0xf6000000-0xf6000fff irq 2 at device 8.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
pcib2: <PCI to PCI bridge (vendor=1022 device=7448)> at device 16.0 on pci0
IOAPIC #0 intpin 18 -> irq 4
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x13f6, dev=0x0111) at 4.0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem
0xf4800000-0xf481ffff,0xf5000000-0xf5000fff irq 4 at device 5.0 on pci2
fxp0: Ethernet address 00:02:b3:9e:f1:0c
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xd4000-0xd57ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP Filter: v3.4.20 initialized. Default = block all, Logging = enabled
SMP: AP CPU #1 Launched!
acd0: CDROM <TOSHIBA CD-ROM XM-5702B> at ata0-master using PIO3
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 6 lun 0
da0: <IBM IC35L036UWD210-0 S5BS> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da1 at ahc0 bus 0 target 10 lun 0
da1: <IBM IC35L036UWD210-0 S5BS> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da1: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
arplookup 210.115.233.67 failed: host is not on local network
arplookup 210.115.233.67 failed: host is not on local network
arplookup 210.115.233.67 failed: host is not on local network
arplookup 210.115.233.67 failed: host is not on local network
arplookup 210.115.233.67 failed: host is not on local network
arplookup 210.115.233.67 failed: host is not on local network
arplookup 66.3.24.131 failed: host is not on local network
arplookup 66.3.24.131 failed: host is not on local network
arplookup 66.3.24.131 failed: host is not on local network
arplookup 66.3.24.131 failed: host is not on local network
arplookup 65.42.42.82 failed: host is not on local network
arplookup 65.42.42.82 failed: host is not on local network
arplookup 65.42.42.82 failed: host is not on local network
arplookup 65.42.42.82 failed: host is not on local network
-Marcus
----------------------------------------------
Marcus Beaman DAS/IRMD/DVS
Network Operations Analyst
(503) 378-3627 hotline
(503) 378-6408 work
(503) 373-2871 pager
--------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MMEPLEIAKBGICDPPJENCGECECBAA.marcus.beaman>