Date: Tue, 18 Dec 2001 17:16:13 -0000 From: "Lawrence Farr" <freebsd-net@epcdirect.co.uk> To: "'Rick Bischoff'" <bischoff@rickjr.org> Cc: <stable@FreeBSD.ORG> Subject: RE: Re[2]: Lockups Message-ID: <004d01c187e7$b1ea6c10$c80aa8c0@lfarr> In-Reply-To: <762805203.20011218120633@rickjr.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I think there are some issues with lockups that were fixed by a BIOS update. Or it might have been the other Tyan dual athlon board. Worth a look anyway! Lawrence Farr EPC Direct Limited > -----Original Message----- > From: owner-freebsd-stable@FreeBSD.ORG > [mailto:owner-freebsd-stable@FreeBSD.ORG] On Behalf Of Rick Bischoff > Sent: 18 December 2001 17:07 > To: Lawrence Farr > Cc: stable@FreeBSD.ORG > Subject: Re[2]: Lockups > > > Hello Lawrence, > > I haven't tried that yet since I am still looking for a 95/98 > boot disk. And, my mistake, it's actually a S2460 Tiger MP > board. > > Tuesday, December 18, 2001, 11:52:43 AM, you wrote: > > LF> Have you flashed the latest bios? > > LF> Lawrence Farr > LF> EPC Direct Limited > > >> -----Original Message----- > >> From: owner-freebsd-stable@FreeBSD.ORG > >> > [mailto:ostable@FreeBSD.ORGwner-freebsd-> stable@FreeBSD.ORG] > On Behalf Of Rick Bischoff > >> Sent: 18 > December 2001 16:28 > >> To: stable-digest > >> Subject: Lockups > >> > >> > >> Hello all, > >> > >> I am running a dual AMD Tyan S2462 Thunder K7 motherboard with > >> dual AMD 1700 XP+ (the 1.4 GHz version) with 512 MB ECC RAM, and > >> two western digital 40GB and 30GB hard drives. > >> > >> Anyways, I can install FreeBSD (4.3 Release) just fine. > >> I can cvsup the entire source tree. I can't compile squat. > >> > >> What happens.. Get's half hour into compiling world, or > half way into > >> building a new kernel and the entire system hard locks. > Same thing > >> happens with SuSE Linux 7.3. System works fine in Windows 2K. > >> > >> This is with a minimal install, so I am not using my graphics or > >> sound system at all! Any ideas? I'm beginning to think > its the BIOS > >> MP setting (it's at the 1.4 MP spec)-- would changing it to 1.1 > >> Compatibility mode help?? > > -- > Best regards, > Rick mailto:bischoff@rickjr.org > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004d01c187e7$b1ea6c10$c80aa8c0>