Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 15 Jun 2011 17:20:58 -0700
From:      Jack Vogel <jfvogel@gmail.com>
To:        Joshua Boyd <boydjd@jbip.net>
Cc:        freebsd-stable <freebsd-stable@freebsd.org>, "Vogel, Jack" <jack.vogel@intel.com>, Jeremy Chadwick <freebsd@jdc.parodius.com>
Subject:   Re: em0 watchdog timeouts on 8-STABLE
Message-ID:  <BANLkTininFrihBXvsKwAnheqE%2B%2BXoyhCVg@mail.gmail.com>
In-Reply-To: <BANLkTim_Y30cXNtvOGg_%2Bj4devU5VtiMxA@mail.gmail.com>
References:  <BANLkTinoyV61RzkB8HbHe=AY8zsBov4JXg@mail.gmail.com> <20110615075754.GA54879@icarus.home.lan> <BANLkTim_Y30cXNtvOGg_%2Bj4devU5VtiMxA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
I have hardware now, am working on reproducing this. Just curious, do you
have
the em driver defined in the kernel, or as a module?

Jack


On Wed, Jun 15, 2011 at 2:09 AM, Joshua Boyd <boydjd@jbip.net> wrote:

> On Wed, Jun 15, 2011 at 3:57 AM, Jeremy Chadwick
> <freebsd@jdc.parodius.com>wrote:
>
> > On Wed, Jun 15, 2011 at 03:14:43AM -0400, Joshua Boyd wrote:
> > > I recently updated my server to the latest 8-STABLE, and upgraded to
> v28
> > > ZFS. I have not had these problems on any other version of 8-STABLE or
> > > 7-STABLE, which this box was upgraded from some time ago.
> > >
> > > Now, during my weekly scrub, I get the following messages and em0 is
> > > unresponsive:
> > >
> > > Jun 12 03:07:58 foghornleghorn kernel: em0: Watchdog timeout --
> resetting
> > > Jun 12 03:07:58 foghornleghorn kernel: em0: link state changed to DOWN
> > > Jun 12 03:08:01 foghornleghorn kernel: em0: link state changed to UP
> > > Jun 12 03:08:47 foghornleghorn kernel: em0: Watchdog timeout --
> resetting
> > > Jun 12 03:08:47 foghornleghorn kernel: em0: link state changed to DOWN
> > > Jun 12 03:08:50 foghornleghorn kernel: em0: link state changed to UP
> > >
> > > My scrub is scheduled to start at 03:00:00, so it looks like watchdog
> > > timeouts start occurring pretty quickly once I/O ramps up.
> > >
> > > Here's some possibly relevant information, let me know if anything else
> > > would be helpful to troubleshoot.
> > >
> > > FreeBSD foghornleghorn.res.openband.net 8.2-STABLE FreeBSD 8.2-STABLE
> > #17:
> > > Mon Jun  6 19:40:19 EDT 2011
> > > root@foghornleghorn.res.openband.net:
> /usr/obj/usr/src/sys/FOGHORNLEGHORN
> > >  amd64
> > >
> > > em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port
> > 0xe800-0xe83f
> > > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on
> > pci7
> > >
> > > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086
> rev=0x05
> > > hdr=0x00
> > >     vendor     = 'Intel Corporation'
> > >     device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
> > >     class      = network
> > >     subclass   = ethernet
> > >
> > > And, the SAS cards:
> > >
> > > dev.mpt.0.%desc: LSILogic SAS/SATA Adapter
> > > dev.mpt.0.%driver: mpt
> > > dev.mpt.0.%location: slot=0 function=0
> > > dev.mpt.0.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9
> > > subdevice=0xa580 class=0x010000
> > > dev.mpt.0.%parent: pci1
> > > dev.mpt.0.debug: 3
> > > dev.mpt.0.role: 1
> > > dev.mpt.1.%desc: LSILogic SAS/SATA Adapter
> > > dev.mpt.1.%driver: mpt
> > > dev.mpt.1.%location: slot=0 function=0
> > > dev.mpt.1.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9
> > > subdevice=0xa580 class=0x010000
> > > dev.mpt.1.%parent: pci2
> > > dev.mpt.1.debug: 3
> > > dev.mpt.1.role: 1
> > > dev.mpt.2.%desc: LSILogic SAS/SATA Adapter
> > > dev.mpt.2.%driver: mpt
> > > dev.mpt.2.%location: slot=0 function=0
> > > dev.mpt.2.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x1000
> > > subdevice=0x30a0 class=0x010000
> > > dev.mpt.2.%parent: pci6
> > > dev.mpt.2.debug: 3
> > > dev.mpt.2.role: 1
> >
> > Please provide output from the following commands (as root):
> >
> > # pciconf -lvcb
> >
>
> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 GFX Dual Slot'
>    class      = bridge
>    subclass   = HOST-PCI
> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (external gfx0 port A)'
>    class      = bridge
>    subclass   = PCI-PCI
> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (external gfx0 port B)'
>    class      = bridge
>    subclass   = PCI-PCI
> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (PCIe gpp port A)'
>    class      = bridge
>    subclass   = PCI-PCI
> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (PCIe gpp port C)'
>    class      = bridge
>    subclass   = PCI-PCI
> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (PCIe gpp port D)'
>    class      = bridge
>    subclass   = PCI-PCI
> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (external gfx1 port A)'
>    class      = bridge
>    subclass   = PCI-PCI
> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002
> rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 Serial ATA Controller'
>    class      = mass storage
>    subclass   = ATA
> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI0)'
>    class      = serial bus
>    subclass   = USB
> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI1)'
>    class      = serial bus
>    subclass   = USB
> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI2)'
>    class      = serial bus
>    subclass   = USB
> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI3)'
>    class      = serial bus
>    subclass   = USB
> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI4)'
>    class      = serial bus
>    subclass   = USB
> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (EHCI)'
>    class      = serial bus
>    subclass   = USB
> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 rev=0x14
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'ATI SMBus (ATI RD600/RS600)'
>    class      = serial bus
>    subclass   = SMBus
> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002
> rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'ATI RD600/RS600 IDE Controller (RD600/RS600)'
>    class      = mass storage
>    subclass   = ATA
> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 High Definition Audio Controller'
>    class      = multimedia
>    subclass   = HDA
> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 PCI to LPC Bridge'
>    class      = bridge
>    subclass   = PCI-ISA
> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 PCI to PCI Bridge'
>    class      = bridge
>    subclass   = PCI-PCI
> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport
> Technology Configuration'
>    class      = bridge
>    subclass   = HOST-PCI
> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
>    class      = bridge
>    subclass   = HOST-PCI
> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
>    class      = bridge
>    subclass   = HOST-PCI
> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous
> Control'
>    class      = bridge
>    subclass   = HOST-PCI
> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
>    class      = bridge
>    subclass   = HOST-PCI
> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
> hdr=0x00
>    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
>    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
>    class      = mass storage
>    subclass   = SCSI
> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
> hdr=0x00
>    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
>    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
>    class      = mass storage
>    subclass   = SCSI
> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
> rev=0xb1
> hdr=0x00
>    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>    device     = '6121 SATA2 Controller'
>    class      = mass storage
>    subclass   = ATA
> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12
> hdr=0x00
>    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>    device     = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)'
>    class      = network
>    subclass   = ethernet
> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
> rev=0xb2
> hdr=0x00
>    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>    device     = '6121 SATA2 Controller'
>    class      = mass storage
>    subclass   = ATA
> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08
> hdr=0x00
>    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
>    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
>    class      = mass storage
>    subclass   = SCSI
> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
> hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
>    class      = network
>    subclass   = ethernet
> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333
> rev=0x44
> hdr=0x00
>    vendor     = 'S3 Graphics Co., Ltd'
>    device     = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
>    class      = display
>    subclass   = VGA
> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70
> hdr=0x00
>    vendor     = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
>    device     = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)'
>    class      = serial bus
>    subclass   = FireWire
> [josh@foghornleghorn /var/log]$ sudo su -
> foghornleghorn#  pciconf -lvcb
> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 GFX Dual Slot'
>    class      = bridge
>    subclass   = HOST-PCI
>    cap 08[c4] = HT slave
>    cap 08[40] = HT retry mode
>    cap 08[54] = HT unit ID clumping
>    cap 08[9c] = HT unknown d03c
> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (external gfx0 port A)'
>    class      = bridge
>    subclass   = PCI-PCI
>    cap 01[50] = powerspec 3  supports D0 D3  current D0
>    cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
>    cap 05[a0] = MSI supports 1 message
>    cap 0d[b0] = PCI Bridge card=0x59561002
>    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
> ecap 000b[100] = unknown 1
> ecap 0002[110] = VC 1 max VC0
> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (external gfx0 port B)'
>    class      = bridge
>    subclass   = PCI-PCI
>    cap 01[50] = powerspec 3  supports D0 D3  current D0
>    cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
>    cap 05[a0] = MSI supports 1 message
>    cap 0d[b0] = PCI Bridge card=0x59561002
>    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
> ecap 000b[100] = unknown 1
> ecap 0002[110] = VC 1 max VC0
> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (PCIe gpp port A)'
>    class      = bridge
>    subclass   = PCI-PCI
>    cap 01[50] = powerspec 3  supports D0 D3  current D0
>    cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x2)
>    cap 05[a0] = MSI supports 1 message
>    cap 0d[b0] = PCI Bridge card=0x59561002
>    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
> ecap 000b[100] = unknown 1
> ecap 0002[110] = VC 1 max VC0
> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (PCIe gpp port C)'
>    class      = bridge
>    subclass   = PCI-PCI
>    cap 01[50] = powerspec 3  supports D0 D3  current D0
>    cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
>    cap 05[a0] = MSI supports 1 message
>    cap 0d[b0] = PCI Bridge card=0x59561002
>    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
> ecap 000b[100] = unknown 1
> ecap 0002[110] = VC 1 max VC0
> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (PCIe gpp port D)'
>    class      = bridge
>    subclass   = PCI-PCI
>    cap 01[50] = powerspec 3  supports D0 D3  current D0
>    cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
>    cap 05[a0] = MSI supports 1 message
>    cap 0d[b0] = PCI Bridge card=0x59561002
>    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
> ecap 000b[100] = unknown 1
> ecap 0002[110] = VC 1 max VC0
> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'RD790 PCI to PCI bridge (external gfx1 port A)'
>    class      = bridge
>    subclass   = PCI-PCI
>    cap 01[50] = powerspec 3  supports D0 D3  current D0
>    cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8)
>    cap 05[a0] = MSI supports 1 message
>    cap 0d[b0] = PCI Bridge card=0x59561002
>    cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
> ecap 000b[100] = unknown 1
> ecap 0002[110] = VC 1 max VC0
> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002
> rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 Serial ATA Controller'
>    class      = mass storage
>    subclass   = ATA
>    bar   [10] = type I/O Port, range 32, base 0x5000, size  8, enabled
>    bar   [14] = type I/O Port, range 32, base 0x4000, size  4, enabled
>    bar   [18] = type I/O Port, range 32, base 0x3000, size  8, enabled
>    bar   [1c] = type I/O Port, range 32, base 0x2000, size  4, enabled
>    bar   [20] = type I/O Port, range 32, base 0x1000, size 16, enabled
>    bar   [24] = type Memory, range 32, base 0xf71ff800, size 1024, enabled
>    cap 01[60] = powerspec 2  supports D0 D3  current D0
> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI0)'
>    class      = serial bus
>    subclass   = USB
>    bar   [10] = type Memory, range 32, base 0xf71fe000, size 4096, enabled
> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI1)'
>    class      = serial bus
>    subclass   = USB
>    bar   [10] = type Memory, range 32, base 0xf71fd000, size 4096, enabled
> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI2)'
>    class      = serial bus
>    subclass   = USB
>    bar   [10] = type Memory, range 32, base 0xf71fc000, size 4096, enabled
> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI3)'
>    class      = serial bus
>    subclass   = USB
>    bar   [10] = type Memory, range 32, base 0xf71fb000, size 4096, enabled
> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (OHCI4)'
>    class      = serial bus
>    subclass   = USB
>    bar   [10] = type Memory, range 32, base 0xf71fa000, size 4096, enabled
> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 USB Controller (EHCI)'
>    class      = serial bus
>    subclass   = USB
>    bar   [10] = type Memory, range 32, base 0xf71ff000, size 256, enabled
>    cap 01[c0] = powerspec 2  supports D0 D1 D2 D3  current D0
>    cap 05[d0] = MSI supports 1 message
>    cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 rev=0x14
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'ATI SMBus (ATI RD600/RS600)'
>    class      = serial bus
>    subclass   = SMBus
>    bar   [10] = type I/O Port, range 32, base 0xb00, size 16, enabled
>    cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000
> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002
> rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'ATI RD600/RS600 IDE Controller (RD600/RS600)'
>    class      = mass storage
>    subclass   = ATA
>    bar   [10] = type I/O Port, range 32, base 0x1f0, size  8, enabled
>    bar   [14] = type I/O Port, range 32, base 0x3f4, size  1, enabled
>    bar   [18] = type I/O Port, range 32, base 0x170, size  8, enabled
>    bar   [1c] = type I/O Port, range 32, base 0x374, size  1, enabled
>    bar   [20] = type I/O Port, range 32, base 0xff00, size 16, enabled
> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 High Definition Audio Controller'
>    class      = multimedia
>    subclass   = HDA
>    bar   [10] = type Memory, range 64, base 0xf71f4000, size 16384, enabled
>    cap 01[50] = powerspec 2  supports D0 D3  current D0
> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 rev=0x00
> hdr=0x00
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 PCI to LPC Bridge'
>    class      = bridge
>    subclass   = PCI-ISA
> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00
> hdr=0x01
>    vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>    device     = 'IXP SB600 PCI to PCI Bridge'
>    class      = bridge
>    subclass   = PCI-PCI
> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport
> Technology Configuration'
>    class      = bridge
>    subclass   = HOST-PCI
>    cap 08[80] = HT host
> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
>    class      = bridge
>    subclass   = HOST-PCI
> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
>    class      = bridge
>    subclass   = HOST-PCI
> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous
> Control'
>    class      = bridge
>    subclass   = HOST-PCI
>    cap 0f[f0] = unknown
> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022
> rev=0x00
> hdr=0x00
>    vendor     = 'Advanced Micro Devices (AMD)'
>    device     = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
>    class      = bridge
>    subclass   = HOST-PCI
> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
> hdr=0x00
>    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
>    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
>    class      = mass storage
>    subclass   = SCSI
>    bar   [10] = type I/O Port, range 32, base 0x6000, size 256, disabled
>    bar   [14] = type Memory, range 64, base 0xf75fc000, size 16384, enabled
>    bar   [1c] = type Memory, range 64, base 0xf75e0000, size 65536, enabled
>    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
>    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
>    cap 05[98] = MSI supports 1 message, 64 bit
>    cap 11[b0] = MSI-X supports 1 message in map 0x14
> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 rev=0x08
> hdr=0x00
>    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
>    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
>    class      = mass storage
>    subclass   = SCSI
>    bar   [10] = type I/O Port, range 32, base 0x7000, size 256, disabled
>    bar   [14] = type Memory, range 64, base 0xf78fc000, size 16384, enabled
>    bar   [1c] = type Memory, range 64, base 0xf78e0000, size 65536, enabled
>    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
>    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
>    cap 05[98] = MSI supports 1 message, 64 bit
>    cap 11[b0] = MSI-X supports 1 message in map 0x14
> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
> rev=0xb1
> hdr=0x00
>    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>    device     = '6121 SATA2 Controller'
>    class      = mass storage
>    subclass   = ATA
>    bar   [10] = type I/O Port, range 32, base 0x9800, size  8, enabled
>    bar   [14] = type I/O Port, range 32, base 0x9400, size  4, enabled
>    bar   [18] = type I/O Port, range 32, base 0x9000, size  8, enabled
>    bar   [1c] = type I/O Port, range 32, base 0x8800, size  4, enabled
>    bar   [20] = type I/O Port, range 32, base 0x8400, size 16, enabled
>    bar   [24] = type Memory, range 32, base 0xf79ffc00, size 1024, enabled
>    cap 01[48] = powerspec 2  supports D0 D1 D3  current D0
>    cap 05[50] = MSI supports 1 message
>    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected
> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab rev=0x12
> hdr=0x00
>    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>    device     = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)'
>    class      = network
>    subclass   = ethernet
>    bar   [10] = type Memory, range 64, base 0xf7afc000, size 16384, enabled
>    bar   [18] = type I/O Port, range 32, base 0xa800, size 256, enabled
>    cap 01[48] = powerspec 3  supports D0 D1 D2 D3  current D0
>    cap 03[50] = VPD
>    cap 05[5c] = MSI supports 1 message, 64 bit enabled with 1 message
>    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab
> rev=0xb2
> hdr=0x00
>    vendor     = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
>    device     = '6121 SATA2 Controller'
>    class      = mass storage
>    subclass   = ATA
>    bar   [10] = type I/O Port, range 32, base 0xc800, size  8, enabled
>    bar   [14] = type I/O Port, range 32, base 0xc400, size  4, enabled
>    bar   [18] = type I/O Port, range 32, base 0xc000, size  8, enabled
>    bar   [1c] = type I/O Port, range 32, base 0xb800, size  4, enabled
>    bar   [20] = type I/O Port, range 32, base 0xb400, size 16, enabled
>    bar   [24] = type Memory, range 32, base 0xf7bffc00, size 1024, enabled
>    cap 01[48] = powerspec 2  supports D0 D1 D3  current D0
>    cap 05[50] = MSI supports 1 message
>    cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link x1(x1)
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 rev=0x08
> hdr=0x00
>    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
>    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
>    class      = mass storage
>    subclass   = SCSI
>    bar   [10] = type I/O Port, range 32, base 0xd000, size 256, disabled
>    bar   [14] = type Memory, range 64, base 0xf7ffc000, size 16384, enabled
>    bar   [1c] = type Memory, range 64, base 0xf7fe0000, size 65536, enabled
>    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
>    cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
>    cap 05[98] = MSI supports 1 message, 64 bit
>    cap 11[b0] = MSI-X supports 1 message in map 0x14
> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected
> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
> hdr=0x00
>    vendor     = 'Intel Corporation'
>    device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
>    class      = network
>    subclass   = ethernet
>     bar   [10] = type Memory, range 32, base 0xfebe0000, size 131072,
> enabled
>    bar   [14] = type Memory, range 32, base 0xfebc0000, size 131072,
> enabled
>    bar   [18] = type I/O Port, range 32, base 0xe800, size 64, enabled
>    cap 01[dc] = powerspec 2  supports D0 D3  current D0
>    cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction
> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333
> rev=0x44
> hdr=0x00
>    vendor     = 'S3 Graphics Co., Ltd'
>    device     = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01'
>    class      = display
>    subclass   = VGA
>    bar   [10] = type Memory, range 32, base 0xf8000000, size 67108864,
> enabled
> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 rev=0x70
> hdr=0x00
>    vendor     = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)'
>    device     = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)'
>    class      = serial bus
>    subclass   = FireWire
>    bar   [10] = type Memory, range 32, base 0xfeb8f000, size 4096, enabled
>    cap 01[44] = powerspec 2  supports D0 D1 D2 D3  current D0
>
>
>
> > # vmstat -i
> >
>
> interrupt                          total       rate
> irq9: acpi0                            1          0
> irq16: atapci0+                        2          0
> irq17: ohci1 ohci3                     3          0
> irq18: mpt0 ohci2+               7066718         31
> irq19: mpt1 atapci*              7798877         34
> irq20: em0                      11715792         51
> irq22: atapci4                    628883          2
> cpu0: timer                    455853831       1999
> irq256: mskc0                   97098730        425
> cpu1: timer                    455845190       1999
> Total                         1036008027       4544
>
>
>
> > # sysctl -a | grep msi
> >
>
> hw.pci.honor_msi_blacklist: 1
> hw.pci.enable_msix: 1
> hw.pci.enable_msi: 1
>
>
>
> > # dmesg
> >
>
> Copyright (c) 1992-2011 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.2-STABLE #17: Mon Jun  6 19:40:19 EDT 2011
>    root@foghornleghorn.res.openband.net:
> /usr/obj/usr/src/sys/FOGHORNLEGHORN
> amd64
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Phenom(tm) II X2 555 Processor (3209.77-MHz K8-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x100f43  Family = 10  Model = 4  Stepping =
> 3
>
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x802009<SSE3,MON,CX16,POPCNT>
>  AMD
> Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD
>
> Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
>  TSC: P-state invariant
> real memory  = 8589934592 (8192 MB)
> avail memory = 8257736704 (7875 MB)
> ACPI APIC Table: <092310 OEMAPIC >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> acpi0: <092310 OEMRSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of fee00000, 1000 (3) failed
> acpi0: reservation of ffb80000, 80000 (3) failed
> acpi0: reservation of fff00000, 100000 (3) failed
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, dff00000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> mpt0: <LSILogic SAS/SATA Adapter> port 0x6000-0x60ff mem
> 0xf75fc000-0xf75fffff,0xf75e0000-0xf75effff irq 18 at device 0.0 on pci1
> mpt0: [ITHREAD]
> mpt0: MPI Version=1.5.20.0
> pcib2: <ACPI PCI-PCI bridge> irq 19 at device 3.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> mpt1: <LSILogic SAS/SATA Adapter> port 0x7000-0x70ff mem
> 0xf78fc000-0xf78fffff,0xf78e0000-0xf78effff irq 19 at device 0.0 on pci2
> mpt1: [ITHREAD]
> mpt1: MPI Version=1.5.20.0
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> atapci0: <Marvell 88SX6121 UDMA133 controller> port
> 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f mem
> 0xf79ffc00-0xf79fffff irq 16 at device 0.0 on pci3
> atapci0: [ITHREAD]
> atapci1: <AHCI SATA controller> on atapci0
> atapci1: [ITHREAD]
> atapci1: AHCI v1.00 controller with 3 3Gbps ports, PM supported
> ata2: <ATA channel 0> on atapci1
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci1
> ata3: [ITHREAD]
> ata4: <ATA channel 0> on atapci0
> ata4: [ITHREAD]
> pcib4: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xa800-0xa8ff mem
> 0xf7afc000-0xf7afffff irq 18 at device 0.0 on pci4
> msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on
> mskc0
> msk0: Ethernet address: 00:1f:c6:e9:f8:7c
> miibus0: <MII bus> on msk0
> e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
> e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
> mskc0: [ITHREAD]
> pcib5: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> atapci2: <Marvell 88SX6121 UDMA133 controller> port
> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f mem
> 0xf7bffc00-0xf7bfffff irq 19 at device 0.0 on pci5
> atapci2: [ITHREAD]
> atapci3: <AHCI SATA controller> on atapci2
> atapci3: [ITHREAD]
> atapci3: AHCI v1.00 controller with 3 3Gbps ports, PM supported
> ata5: <ATA channel 0> on atapci3
> ata5: [ITHREAD]
> ata6: <ATA channel 1> on atapci3
> ata6: [ITHREAD]
> ata7: <ATA channel 0> on atapci2
> ata7: [ITHREAD]
> pcib6: <ACPI PCI-PCI bridge> irq 19 at device 11.0 on pci0
> pci6: <ACPI PCI bus> on pcib6
> mpt2: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem
> 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 19 at device 0.0 on pci6
> mpt2: [ITHREAD]
> mpt2: MPI Version=1.5.19.0
> atapci4: <ATI IXP600 SATA300 controller> port
> 0x5000-0x5007,0x4000-0x4003,0x3000-0x3007,0x2000-0x2003,0x1000-0x100f mem
> 0xf71ff800-0xf71ffbff irq 22 at device 18.0 on pci0
> atapci4: [ITHREAD]
> atapci4: AHCI v1.10 controller with 4 3Gbps ports, PM supported
> ata8: <ATA channel 0> on atapci4
> ata8: port is not ready (timeout 0ms) tfd = 000001d0
> ata8: software reset clear timeout
> ata8: [ITHREAD]
> ata9: <ATA channel 1> on atapci4
> ata9: [ITHREAD]
> ata10: <ATA channel 2> on atapci4
> ata10: [ITHREAD]
> ata11: <ATA channel 3> on atapci4
> ata11: [ITHREAD]
> ohci0: <OHCI (generic) USB controller> mem 0xf71fe000-0xf71fefff irq 16 at
> device 19.0 on pci0
> ohci0: [ITHREAD]
> usbus0: <OHCI (generic) USB controller> on ohci0
> ohci1: <OHCI (generic) USB controller> mem 0xf71fd000-0xf71fdfff irq 17 at
> device 19.1 on pci0
> ohci1: [ITHREAD]
> usbus1: <OHCI (generic) USB controller> on ohci1
> ohci2: <OHCI (generic) USB controller> mem 0xf71fc000-0xf71fcfff irq 18 at
> device 19.2 on pci0
> ohci2: [ITHREAD]
> usbus2: <OHCI (generic) USB controller> on ohci2
> ohci3: <OHCI (generic) USB controller> mem 0xf71fb000-0xf71fbfff irq 17 at
> device 19.3 on pci0
> ohci3: [ITHREAD]
> usbus3: <OHCI (generic) USB controller> on ohci3
> ohci4: <OHCI (generic) USB controller> mem 0xf71fa000-0xf71fafff irq 18 at
> device 19.4 on pci0
> ohci4: [ITHREAD]
> usbus4: <OHCI (generic) USB controller> on ohci4
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf71ff000-0xf71ff0ff irq 19
> at device 19.5 on pci0
> ehci0: [ITHREAD]
> ehci0: AMD SB600/700 quirk applied
> usbus5: EHCI version 1.0
> usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci5: <ATI IXP600 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
> ata0: <ATA channel 0> on atapci5
> ata0: [ITHREAD]
> pci0: <multimedia, HDA> at device 20.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci7: <ACPI PCI bus> on pcib7
> em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0xe800-0xe83f
> mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on
> pci7
> em0: [FILTER]
> em0: Ethernet address: 00:1b:21:4e:e5:2e
> vgapci0: <VGA-compatible display> mem 0xf8000000-0xfbffffff at device 6.0
> on
> pci7
> pci7: <serial bus, FireWire> at device 8.0 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> device_attach: acpi_hpet1 attach returned 12
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart0: [FILTER]
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_throttle0: CLK_VAL field overlaps THT_EN bit
> device_attach: acpi_throttle0 attach returned 6
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 12Mbps Full Speed USB v1.0
> usbus5: 480Mbps High Speed USB v2.0
> ugen0.1: <ATI> at usbus0
> uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> ugen1.1: <ATI> at usbus1
> uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen2.1: <ATI> at usbus2
> uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> ugen3.1: <ATI> at usbus3
> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen4.1: <ATI> at usbus4
> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen5.1: <ATI> at usbus5
> uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
> ad16: 476940MB <Seagate ST3500641NS 3.AEP> at ata8-master UDMA100 SATA
> 3Gb/s
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> uhub3: 2 ports with 2 removable, self powered
> uhub4: 2 ports with 2 removable, self powered
> da8 at mpt0 bus 0 scbus0 target 0 lun 0
> da8: <ATA ST31000528AS CC38> Fixed Direct Access SCSI-5 device
> da8: 300.000MB/s transfers
> da8: Command Queueing enabled
> da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da9 at mpt0 bus 0 scbus0 target 1 lun 0
> da9: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device
> da9: 300.000MB/s transfers
> da9: Command Queueing enabled
> da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da10 at mpt0 bus 0 scbus0 target 2 lun 0
> da10: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device
> da10: 300.000MB/s transfers
> da10: Command Queueing enabled
> da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da11 at mpt0 bus 0 scbus0 target 3 lun 0
> da11: <ATA SAMSUNG HD103SJ 00E4> Fixed Direct Access SCSI-5 device
> da11: 300.000MB/s transfers
> da11: Command Queueing enabled
> da11: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da12 at mpt0 bus 0 scbus0 target 4 lun 0
> da12: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
> da12: 300.000MB/s transfers
> da12: Command Queueing enabled
> da12: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da13 at mpt0 bus 0 scbus0 target 5 lun 0
> da13: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
> da13: 300.000MB/s transfers
> da13: Command Queueing enabled
> da13: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da14 at mpt0 bus 0 scbus0 target 6 lun 0
> da14: <ATA Hitachi HDS72101 A39C> Fixed Direct Access SCSI-5 device
> da14: 300.000MB/s transfers
> da14: Command Queueing enabled
> da14: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da0 at mpt1 bus 0 scbus1 target 0 lun 0
> da0: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
> da0: 300.000MB/s transfers
> da0: Command Queueing enabled
> da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da1 at mpt1 bus 0 scbus1 target 1 lun 0
> da1: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
> da1: 300.000MB/s transfers
> da1: Command Queueing enabled
> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da2 at mpt1 bus 0 scbus1 target 2 lun 0
> da2: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
> da2: 300.000MB/s transfers
> da2: Command Queueing enabled
> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da3 at mpt1 bus 0 scbus1 target 3 lun 0
> da3: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
> da3: 300.000MB/s transfers
> da3: Command Queueing enabled
> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da4 at mpt1 bus 0 scbus1 target 4 lun 0
> da4: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
> da4: 300.000MB/s transfers
> da4: Command Queueing enabled
> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
> da5 at mpt1 bus 0 scbus1 target 5 lun 0
> da5: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
> da5: 300.000MB/s transfers
> da5: Command Queueing enabled
> da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da6 at mpt1 bus 0 scbus1 target 6 lun 0
> da6: <ATA ST31000340AS SD04> Fixed Direct Access SCSI-5 device
> da6: 300.000MB/s transfers
> da6: Command Queueing enabled
> da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> da7 at mpt1 bus 0 scbus1 target 7 lun 0
> da7: <ATA SAMSUNG HD103SI 1118> Fixed Direct Access SCSI-5 device
> da7: 300.000MB/s transfers
> da7: Command Queueing enabled
> da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
> SMP: AP CPU #1 Launched!
> uhub5: 10 ports with 10 removable, self powered
> GEOM: da7: geometry does not match label (16h,63s != 255h,63s).
> Trying to mount root from ufs:/dev/ad16s1a
> WARNING: / was not properly dismounted
> ZFS filesystem version 5
> ZFS storage pool version 28
> WARNING: /tmp was not properly dismounted
> WARNING: /usr was not properly dismounted
> WARNING: /var was not properly dismounted
> 0
> mpt1: request 0xffffff80002c57f0:2369 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c57f0:2369 function 0
> mpt1: mpt_wait_req(1) timed out
> mpt1: mpt_recover_commands: abort timed-out. Resetting controller
> mpt1: mpt_cam_event: 0x80
> mpt1: mpt_cam_event: 0x80
> mpt1: completing timedout/aborted req 0xffffff80002c57f0:2369
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x12
> mpt1: mpt_cam_event: 0x16
> mpt1: request 0xffffff80002c5c70:2375 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c5c70:2375 function 0
> mpt1: completing timedout/aborted req 0xffffff80002c5c70:2375
> mpt1:
> abort of req 0xffffff80002c5c70:0 completed
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x16
> mpt1: request 0xffffff80002c5fd0:2379 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c5fd0:2379 function 0
> mpt1: completing timedout/aborted req 0xffffff80002c5fd0:2379
> mpt1:
> abort of req 0xffffff80002c5fd0:0 completed
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x16
> mpt1: request 0xffffff80002c6210:2383 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c6210:2383 function 0
> mpt1: completing timedout/aborted req 0xffffff80002c6210:2383
> mpt1:
> abort of req 0xffffff80002c6210:0 completed
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x16
> mpt1: request 0xffffff80002c6180:2387 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c6180:2387 function 0
> mpt1: completing timedout/aborted req 0xffffff80002c6180:2387
> mpt1:
> abort of req 0xffffff80002c6180:0 completed
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x16
> mpt1: request 0xffffff80002c62a0:2391 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c62a0:2391 function 0
> mpt1: completing timedout/aborted req 0xffffff80002c62a0:2391
> mpt1:
> abort of req 0xffffff80002c62a0:0 completed
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x16
> mpt1: request 0xffffff80002c6720:2395 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c6720:2395 function 0
> mpt1: completing timedout/aborted req 0xffffff80002c6720:2395
> mpt1:
> abort of req 0xffffff80002c6720:0 completed
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x16
> mpt1: request 0xffffff80002c67b0:2399 timed out for ccb 0xffffff00063bb000
> (req->ccb 0xffffff00063bb000)
> mpt1: attempting to abort req 0xffffff80002c67b0:2399 function 0
> mpt1: completing timedout/aborted req 0xffffff80002c67b0:2399
> mpt1:
> abort of req 0xffffff80002c67b0:0 completed
> mpt1: mpt_cam_event: 0x16
> mpt1: mpt_cam_event: 0x16
> mpt0: request 0xffffff80002a69e0:2082 timed out for ccb 0xffffff0006389800
> (req->ccb 0xffffff0006389800)
> mpt0: attempting to abort req 0xffffff80002a69e0:2082 function 0
> mpt0: completing timedout/aborted req 0xffffff80002a69e0:2082
> mpt0: abort of req 0xffffff80002a69e0:0 completed
> mpt0: mpt_cam_event: 0x16
> mpt0: mpt_cam_event: 0x16
> mpt0: request 0xffffff80002a6c20:2086 timed out for ccb 0xffffff0006389800
> (req->ccb 0xffffff0006389800)
> mpt0: attempting to abort req 0xffffff80002a6c20:2086 function 0
> mpt0: completing timedout/aborted req 0xffffff80002a6c20:2086
> mpt0: abort of req 0xffffff80002a6c20:0 completed
> mpt0: mpt_cam_event: 0x16
> mpt0: mpt_cam_event: 0x16
> mpt0: request 0xffffff80002a6cb0:2090 timed out for ccb 0xffffff0006389800
> (req->ccb 0xffffff0006389800)
> mpt0: attempting to abort req 0xffffff80002a6cb0:2090 function 0
> mpt0: completing timedout/aborted req 0xffffff80002a6cb0:2090
> mpt0: abort of req 0xffffff80002a6cb0:0 completed
> mpt0: mpt_cam_event: 0x16
> mpt0: mpt_cam_event: 0x16
> mpt0: request 0xffffff80002a6b90:2094 timed out for ccb 0xffffff0006389800
> (req->ccb 0xffffff0006389800)
> mpt0: attempting to abort req 0xffffff80002a6b90:2094 function 0
> mpt0: completing timedout/aborted req 0xffffff80002a6b90:2094
> mpt0: abort of req 0xffffff80002a6b90:0 completed
> mpt0: mpt_cam_event: 0x16
> mpt0: mpt_cam_event: 0x16
> tun0: link state changed to UP
> (da8:mpt0:0:0:0): READ(10). CDB: 28 0 3e e2 6f 56 0 0 1 0
> (da8:mpt0:0:0:0): CAM status: SCSI Status Error
> (da8:mpt0:0:0:0): SCSI status: Check Condition
> (da8:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da11:mpt0:0:3:0): READ(10). CDB: 28 0 1a b6 92 0 0 0 80 0
> (da11:mpt0:0:3:0): CAM status: SCSI Status Error
> (da11:mpt0:0:3:0): SCSI status: Check Condition
> (da11:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da2:mpt1:0:2:0): READ(10). CDB: 28 0 76 7b de 0 0 0 80 0
> (da2:mpt1:0:2:0): CAM status: SCSI Status Error
> (da2:mpt1:0:2:0): SCSI status: Check Condition
> (da2:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da10:mpt0:0:2:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0
> (da10:mpt0:0:2:0): CAM status: SCSI Status Error
> (da10:mpt0:0:2:0): SCSI status: Check Condition
> (da10:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da5:mpt1:0:5:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0
> (da5:mpt1:0:5:0): CAM status: SCSI Status Error
> (da5:mpt1:0:5:0): SCSI status: Check Condition
> (da5:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da7:mpt1:0:7:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0
> (da7:mpt1:0:7:0): CAM status: SCSI Status Error
> (da7:mpt1:0:7:0): SCSI status: Check Condition
> (da7:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da6:mpt1:0:6:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0
> (da6:mpt1:0:6:0): CAM status: SCSI Status Error
> (da6:mpt1:0:6:0): SCSI status: Check Condition
> (da6:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da0:mpt1:0:0:0): READ(10). CDB: 28 0 76 91 87 e3 0 0 1 0
> (da0:mpt1:0:0:0): CAM status: SCSI Status Error
> (da0:mpt1:0:0:0): SCSI status: Check Condition
> (da0:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da3:mpt1:0:3:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0
> (da3:mpt1:0:3:0): CAM status: SCSI Status Error
> (da3:mpt1:0:3:0): SCSI status: Check Condition
> (da3:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da1:mpt1:0:1:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0
> (da1:mpt1:0:1:0): CAM status: SCSI Status Error
> (da1:mpt1:0:1:0): SCSI status: Check Condition
> (da1:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da9:mpt0:0:1:0): READ(10). CDB: 28 0 1a b3 d7 0 0 0 80 0
> (da9:mpt0:0:1:0): CAM status: SCSI Status Error
> (da9:mpt0:0:1:0): SCSI status: Check Condition
> (da9:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
> (da4:mpt1:0:4:0): READ(10). CDB: 28 0 53 3c c6 0 0 0 80 0
> (da4:mpt1:0:4:0): CAM status: SCSI Status Error
> (da4:mpt1:0:4:0): SCSI status: Check Condition
> (da4:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
> bus device reset occurred)
>
>
>
> >
> > --
> > | Jeremy Chadwick                                   jdc@parodius.com |
> > | Parodius Networking                       http://www.parodius.com/ |
> > | UNIX Systems Administrator                   Mountain View, CA, US |
> > | Making life hard for others since 1977.               PGP 4BD6C0CB |
> >
> >
>
>
> --
> Joshua Boyd
> JBipNet
>
> E-mail: boydjd@jbip.net
>
> http://www.jbip.net
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTininFrihBXvsKwAnheqE%2B%2BXoyhCVg>