Date: Sun, 27 Nov 2005 16:28:19 +0100 From: Roland Smith <rsmith@xs4all.nl> To: MarkNevada41@aol.com Cc: freebsd-questions@freebsd.org Subject: Re: Very slow printing on 5.4 with cups anh HP LaserJet 4L Message-ID: <20051127152819.GA66942@slackbox.xs4all.nl> In-Reply-To: <249.2391ff0.30bb2859@aol.com> References: <249.2391ff0.30bb2859@aol.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--W/nzBZO5zC0uMSeA Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 27, 2005 at 10:18:49AM -0500, MarkNevada41@aol.com wrote: > how did you change the setting? > =20 > My 932c used to print 3 or 4 lines per pass and now it does one line > per pass > I had the exact same problem, except with a Deskjet 932C. Someone on th= e=20 > list said "man lptcontrol" and set your printer to "poll". >=20 > I used this command: > % lptcontrol -p -d /dev/lpt0 > and it fixed my problem. > =20 > where so you install the command? You should run this command as root from the command line. If you want to make it permanent, add the follwoing to /boot/device.hints: hint.ppc.0.flags=3D"0x28" This puts the port in ECP mode (flag 0x08), and disables the IRQ (flab 0x20), thus enabling polling mode. If your chipset doesn't support ECP mode (unlikely for a reasonably modern one) use 0x20 instead of 0x28. The hint will take eddect on the next reboot. The lptcontrol command will take care of things until you reboot. Roland --=20 R.F.Smith (http://www.xs4all.nl/~rsmith/) Please send e-mail as plain text. public key: http://www.xs4all.nl/~rsmith/pubkey.txt --W/nzBZO5zC0uMSeA Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (FreeBSD) iD8DBQFDidCTEnfvsMMhpyURAtA6AJ9v+RYOy5EALirtw7rmEdkW9PttRwCfZyZT nJYbtD+nbgHTFWWiYVvqZUM= =eLjk -----END PGP SIGNATURE----- --W/nzBZO5zC0uMSeA--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20051127152819.GA66942>