Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 6 Jan 2014 18:15:17 +0800
From:      Huang Wen Hui <huanghwh@gmail.com>
To:        Hans Petter Selasky <hps@bitfrost.no>
Cc:        Adrian Chadd <adrian@freebsd.org>, freebsd-current <freebsd-current@freebsd.org>
Subject:   Re: Install 10.0-RC3 on MacBookPro Late 2013
Message-ID:  <CAB8unca849fK3ma8Ep99c0ZVjQtt=1M_9OoQ6Hw2Dxo5jaQSuQ@mail.gmail.com>
In-Reply-To: <52CA7CE0.7070202@bitfrost.no>
References:  <CAB8uncZO19Aen%2BuQRgO3whSOTVM%2BftcsGrJuGZZd4Qbd1Zf5mw@mail.gmail.com> <CAJ-Vmo=g-iVjNjygY93MVinptkA7HazJ3FRu1PsfKZtj-fubgg@mail.gmail.com> <CAB8unca6XZSEa8=c21yDJ=ueuUiW=D4v2PcLEzgt_sfTgsuzqA@mail.gmail.com> <CAB8unca8G32qcz67EaRdqrSBuO0YiBV4zL7fV3EfMozdeSsBQA@mail.gmail.com> <52CA56E5.8030101@bitfrost.no> <CAJ-Vmo=AxbQ9MMtkB_W3YW0s9QwmR8qWzgprOM_66MQqcgmdNQ@mail.gmail.com> <CAB8uncbjhzG-9BYbYH6skhnf-O24hDeX644aEpz162C-FHWTFA@mail.gmail.com> <52CA6E3F.9000301@bitfrost.no> <CAB8uncah%2BCOOptDmOiaKseqfDyeVd3veg2RLREOzfYtaJhfLYA@mail.gmail.com> <52CA7CE0.7070202@bitfrost.no>

next in thread | previous in thread | raw e-mail | index | archive | help
2014/1/6 Hans Petter Selasky <hps@bitfrost.no>

> On 01/06/14 10:41, Huang Wen Hui wrote:
>
>> % grep xhci dmesg-xhci-debug.txt | more
>> xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xc1e00000-0xc1e0ffff at
>> device 20.0 on pci0
>> xhci0: attempting to allocate 1 MSI vectors (8 supported)
>> xhci0: using IRQ 266 for MSI
>> xhci0: MSI enabled
>>
>
> Those USB timeouts are most likely due to port routing not working
> properly. It is because intel did something special to their lynx point
> series.
>
> Try to set :
>
> hw.usb.xhci.xhci_port_route = "-1"
>
> in /boot/loader.conf


Try this before,  hw.usb.xhci.xhci_port_route = "-1" make almost of all usb
devices not found.

external mouse seems to no power at all.

# usbconfig list
ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE (0mA)
ugen0.2: <product 0x8406 vendor 0x05ac> at usbus0, cfg=255 md=HOST
spd=SUPER (5.0Gbps) pwr=ON (100mA)



>
> --HPS
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB8unca849fK3ma8Ep99c0ZVjQtt=1M_9OoQ6Hw2Dxo5jaQSuQ>