Date: Fri, 19 Jun 1998 12:40:13 +0200 (CEST) From: Peter Cornelius <pc@akk.uni-karlsruhe.de> To: FreeBSD-gnats-submit@FreeBSD.ORG Subject: kern/6991: Kernel build: don't know how to make ../../cfs/cfs_namecache.c Message-ID: <199806191040.MAA15386@inr-delphi.fzk.de>
next in thread | raw e-mail | index | archive | help
>Number: 6991 >Category: kern >Synopsis: Kernel build: don't know how to make ../../cfs/cfs_namecache.c >Confidential: no >Severity: non-critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Fri Jun 19 03:40:01 PDT 1998 >Last-Modified: >Originator: Peter Cornelius >Organization: Arbeitskreis Kultur und Kommunikation, Universitaet Karlsruhe >Release: FreeBSD 2.2.6-STABLE i386 (RELENG_2_2) >Environment: Main board is an Iwill (http://www.iwill.com.tw/) P54TS w/ P133, AIC7850 and 96 MB RAM. petra:~# uname -a > uname.kernel.980408 FreeBSD petra.cornelius.org 2.2.5-RELEASE FreeBSD 2.2.5-RELEASE #0: Sun Mar 29 2 3:56:20 CEST 1998 root@petra.cornelius.org:/usr/src/sys/compile/PETRA i386 but also with 2.2.6-STABLE kernel. I am up to date with RELENG_2_2 src until last night (June 18th, 18.30 UTC) and have the last world made roughly a fortnight ago. (Here, LUIS is the kernel config file, empty lines deleted:) petra:/usr/src/sys/i386/conf# grep -v ^\# LUIS machine "i386" ident LUIS maxusers 16 options CHILD_MAX=128 options OPEN_MAX=128 options FAILSAFE options INCLUDE_CONFIG_FILE # Include this file in kernel config kernel root on wd0 ^L cpu "I486_CPU" options GPL_MATH_EMULATE #Support for x87 emulation via ^L options "COMPAT_43" options USER_LDT #allow user-level control of i386 ldt options SYSVSHM options SYSVSEM options SYSVMSG options "MD5" ^L options DDB options DDB_UNATTENDED options KTRACE #kernel tracing options UCONSOLE options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor ^L options INET #Internet communications protocols pseudo-device ether #Generic Ethernet pseudo-device loop #Network loopback device pseudo-device bpfilter 4 #Berkeley packet filter options MROUTING # Multicast routing options IPDIVERT #divert sockets options TCPDEBUG ^L options FFS #Fast filesystem options NFS #Network File System options "CD9660" #ISO 9660 filesystem options MSDOSFS #MS DOS filesystem options PROCFS #Process filesystem options NSWAPDEV=20 options QUOTA #enable disk quotas options "CD9660_ROOTDELAY=20" ^L controller scbus0 #base SCSI code device sd0 #SCSI disks device st0 #SCSI tapes device cd0 #SCSI CD-ROMs options SCSIDEBUG options SCSI_REPORT_GEOMETRY ^L pseudo-device pty 16 #Pseudo ttys - can go as high as 256 pseudo-device vcfs 4 #coda minicache <-> venus comm. pseudo-device speaker #Play IBM BASIC-style noises out your speaker pseudo-device log #Kernel syslog interface (/dev/klog) pseudo-device gzip #Exec gzipped a.out's pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device ccd 4 #Concatenated disk driver ^L controller isa0 options "AUTO_EOI_1" options "AUTO_EOI_2" options BOUNCE_BUFFERS options "TUNE_1542" controller pnp0 device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint options XSERVER # support for running an X server. options FAT_CURSOR # start with block cursor options PCVT_FREEBSD=220 # This one I added - pc. options MAXCONS=16 # number of virtual consoles options SLOW_VGA # do byte-wide i/o's to TS and GDC regs options SC_HISTORY_SIZE=200 # number of history buffer lines device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" disable bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr options FDC_DEBUG options FDC_PRINT_BOGUS_CHIPTYPE disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 tape ft0 at fdc0 drive 2 device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port "IO_LPT3" disable tty irq 5 vector lptintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr #for some laptops device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" disable tty irq 2 vector siointr device sio3 at isa? port "IO_COM4" disable tty irq 8 vector siointr #DDB, if available. device ed0 at isa? port 0x280 net irq 5 iomem 0xc0000 vector edintr controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 device pca0 at isa? port IO_TIMER1 tty options AHC_TAGENABLE options BOOTP # Use BOOTP to obtain IP address/hostname options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info options "BOOTP_NFSV3" # Use NFS v3 to NFS mount root options NO_LKM options "CLK_USE_I8254_CALIBRATION" options COMPAT_LINUX options DEBUG options "IBCS2" options "SCSI_2_DEF" options SCSI_DELAY=15 # (was 8) Be pessimistic about Joe SCSI device >Description: I'm trying to build a kernel for another machine (i486 hp vectra, btw), but this is the farthest I got: petra:/usr/src/sys/i386/conf# /usr/sbin/config LUIS Removing old directory ../../compile/LUIS: Done. remapped irq 2 to irq 9, please update your config file Kernel build directory is ../../compile/LUIS petra:/usr/src/sys/i386/conf# cd ../../compile/LUIS/ petra:/usr/src/sys/compile/LUIS# make all 2>&1 | tee ~/LUIS.log echo "gcc2_compiled." >symbols.exclude echo "___gnu_compiled_c" >>symbols.exclude grep -v '^#' ../../i386/i386/symbols.raw | sed 's/^ //' | sort -u > symbols.sort cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -nostdinc -I- -I. -I../.. -I../../../include -DSCSI_2_DEF -DDEBUG -DBOOTP_NFSV3 -DBOOTP_NFSROOT -DBOOTP -DTUNE_1542 -DNSWAPDEV=20 -DMSDOSFS -DNFS -DFFS -DIPDIVERT -DINET -DMD5 -DCOMPAT_43 -DFAILSAFE -DKERNEL -DMAXUSERS=16 -UKERNEL ../../i386/i386/genassym.c cc -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -nostdinc -I- -I. -I../.. -I../../../include -DSCSI_2_DEF -DDEBUG -DBOOTP_NFSV3 -DBOOTP_NFSROOT -DBOOTP -DTUNE_1542 -DNSWAPDEV=20 -DMSDOSFS -DNFS -DFFS -DIPDIVERT -DINET -DMD5 -DCOMPAT_43 -DFAILSAFE -DKERNEL -DMAXUSERS=16 genassym.o -o genassym ./genassym >assym.s cc -c -x assembler-with-cpp -DLOCORE -nostdinc -I- -I. -I../.. -I../../../include -DSCSI_2_DEF -DDEBUG -DBOOTP_NFSV3 -DBOOTP_NFSROOT -DBOOTP -DTUNE_1542 -DNSWAPDEV=20 -DMSDOSFS -DNFS -DFFS -DIPDIVERT -DINET -DMD5 -DCOMPAT_43 -DFAILSAFE -DKERNEL ../../i386/i386/locore.s sh ../../kern/vnode_if.sh ../../kern/vnode_if.src cc -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -nostdinc -I- -I. -I../.. -I../../../include -DSCSI_2_DEF -DDEBUG -DBOOTP_NFSV3 -DBOOTP_NFSROOT -DBOOTP -DTUNE_1542 -DNSWAPDEV=20 -DMSDOSFS -DNFS -DFFS -DIPDIVERT -DINET -DMD5 -DCOMPAT_43 -DFAILSAFE -DKERNEL -c vnode_if.c make: don't know how to make ../../cfs/cfs_namecache.c. Stop >How-To-Repeat: Build that kernel. >Fix: No idea. >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199806191040.MAA15386>