Date: Wed, 26 May 1999 20:57:48 +0200 (CEST) From: Wilko Bulte <wilko@yedi.iaf.nl> To: dburr@pobox.com (Donald Burr) Cc: freebsd-scsi@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Help! - "parity error during data-in phase" when using CD-R Message-ID: <199905261857.UAA31596@yedi.iaf.nl> In-Reply-To: <XFMail.990525231141.dburr@pobox.com> from Donald Burr at "May 25, 1999 11:11:41 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
As Donald Burr wrote ... > Thanks to all who responded to my SCSI CD-R problem. > > I have used this CD-R before under FreeBSD, and it works fine. Fully > supported by cdrecord and all that -- I have a stack of self-made freeBSD > release CD-ROMs to prove it. > > Someone suggested a bent pin on the connector. someone else suggested > that the onnector itself might have been damaged somehow (broken solder > connection). The pins are all fine, however I think the latter (bad sold > er connections) is highly likely. OK. Please note that this can be highly difficult to detect. I tend to just heat all the solder joints on the connector. Also look for cracks in the PCB tracks themselves. This procedure fixed my DAT drive. Good luck, Wilko | / o / / _ Arnhem, The Netherlands - Powered by FreeBSD - |/|/ / / /( (_) Bulte WWW : http://www.tcja.nl http://www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199905261857.UAA31596>