Date: Fri, 11 Oct 2019 12:55:58 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: Klaus =?ISO-8859-1?Q?K=FCchemann?= <maciphone2@googlemail.com> Cc: Klaus =?ISO-8859-1?Q?K=FCchemann?= via freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: RockPro64 booting w/ u-boot v2019-rc3 Message-ID: <20191011125558.00bf845d71c27954d220edf0@bidouilliste.com> In-Reply-To: <1570790720416-0.post@n6.nabble.com> References: <20190916064640.GN96402@funkthat.com> <20190924221308.GX96402@funkthat.com> <D27B4CCA-3E30-4212-A973-12DB52A8FCDE@mko.io> <20190925124305.3ada7b327cf73dcb611ec074@bidouilliste.com> <1570790720416-0.post@n6.nabble.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
On Fri, 11 Oct 2019 03:45:20 -0700 (MST)
Klaus K=FCchemann via freebsd-arm <freebsd-arm@freebsd.org> wrote:
> Hi,
>=20
> FreeBSD-13.0-CURRENT-arm64-aarch64-20191004-r353072-memstick.img
When you have some problems with a week old snapshot it's better to
test with latest head.
This was fixed in r353125.
Cheers,
> --
>=20
> U-Boot TPL 2019.10 (Oct 08 2019 - 07:58:06)
> Trying to boot from BOOTROM
> Returning to boot ROM...
>=20
> U-Boot SPL 2019.10 (Oct 08 2019 - 07:58:06 +0000)
> Trying to boot from MMC1
>=20
>=20
> U-Boot 2019.10 (Oct 08 2019 - 07:58:06 +0000)
>=20
> Model: Pine64 RockPro64
> DRAM: 2 GiB << error/it`s the 4GB-model !!!>>>>>>>
> MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
> Loading Environment from MMC... Card did not respond to voltage select!
> *** Warning - No block device, using default environment =
=20
> Consoles: EFI console =
=20
> Reading loader env vars from /efi/freebsd/loader.env =
=20
> Setting currdev to disk0p1: =
=20
> FreeBSD/arm64 EFI loader, Revision 1.1 =
=20
> (Fri Oct 4 02:56:02 UTC 2019 root@releng1.nyi.freebsd.org) =
=20
> rockchip_dnl_key_pressed: adc_channel_single_shot fail! =
=20
> Command line arguments: loader.efi =
=20
> EFI version: 2.80autoboot: 0 =
=20
> EFI Firmware: Das U-Boot (rev 8217.4096) =
=20
> Console: efi (0)s #0, OK =
=20
> Load Path: /efi\boot\bootaa64.efi =
=20
> Load Device:
> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GP
> T,ddd7d28e-e677-11e9-a9eb-002590ec5bf2,0x3,0x10418)efi =
=20
> Trying ESP:
> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GPT,dd
> d7d28e-e677-11e9-a9eb-002590ec5bf2,0x3,0x10418) =
=20
> Setting currdev to disk0p1:tage select! =
=20
> Trying:
> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(2,GPT,ddd7d2
> 8e-e677-11e9-a9eb-002590ec5bf2,0x1041b,0x1ebe80) =
=20
> Setting currdev to disk0p2: =
=20
> Loading /boot/defaults/loader.conf =
=20
> Loading /boot/device.hintsoad any image =
=20
> Loading /boot/loader.confs (18.9 MiB/s) =
=20
> Loading /boot/loader.conf.localERR_BADMAGIC =
=20
> \
> |_| |_| \___|\___||____/|_____/|_____/ =
=20
> ``` =
=20
> ` =20
> =E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2Welcome to FreeBSD=E2=E2=E2=E2=E2=E2=
=E2=E2=E2=E2=E2=E2=E2? s` `.....---.......--.``` =20
> -/ =20
> =E2 =E2? +o .--` /y:=
` =20
> +. =20
> =E2 1. Boot Multi user [Enter] =E2? yo`:. :o =
=20
> `+- =20
> =E2 2. Boot Single user =E2? y/ -/=
` -o/ =20
> =E2 3. Escape to loader prompt =E2? .- =20
> ::/sy+:. =20
> =E2 4. Reboot =E2? / =
`--=20
> / =20
> =E2 =E2? `: =
=20
> :` =20
> =E2? Options: =E2? `: =
=20
> :` =20
> =E2? 5. Kernel: default/kernel (1 of 1) =E2? / =
=20
> / =20
> =E2? 6. Boot Options =E2? .- =
=20
> -. =20
> =E2? =E2? -- =
-. =20
> =E2? =E2? `:` =
`:` =20
> =E2? =E2? .-- =
`--. =20
> =E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=
=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2=E2? .---..=
...----. =20
> Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop =
=20
> Loading kernel... =
=20
> /boot/kernel/kernel text=3D0x958e8c data=3D0x196020+0x7785c4
> syms=3D[0x8+0x13d3d0+0x8+
> 0x129037] =
=20
> Loading configured modules... =
=20
> can't find '/boot/entropy' =
=20
> Using DTB provided by EFI at 0x80ec000. =
=20
> ---<<BOOT>>--- =
=20
> KDB: debugger backends: ddb =
=20
> KDB: current backend: ddb =
=20
> Copyright (c) 1992-2019 The FreeBSD Project. =
=20
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =
=20
> The Regents of the University of California. All rights reserved.=
=20
> FreeBSD is a registered trademark of The FreeBSD Foundation. =
=20
> FreeBSD 13.0-CURRENT #0 r353072: Fri Oct 4 03:32:10 UTC 2019 =
=20
> root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENER=
IC
> arm4
> FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM
> 8.0.)
> WARNING: WITNESS option enabled, expect reduced performance. =
=20
> VT: init without driver. =
=20
> module firmware already present! =
=20
> Starting CPU 1 (1) =
=20
> Starting CPU 2 (2) =
=20
> Starting CPU 3 (3) =
=20
> Starting CPU 4 (100) =
=20
> Starting CPU 5 (101) =
=20
> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs =
=20
> arc4random: WARNING: initial seeding bypassed the cryptographic random
> device b.
> random: entropy device external interface =
=20
> MAP 7cf1d000 mode 2 pages 1 =
=20
> MAP 7cf26000 mode 2 pages 1 =
=20
> MAP 7ff40000 mode 2 pages 16 =
=20
> kbd0 at kbdmux0 =
=20
> ofwbus0: <Open Firmware Device Tree> =
=20
> clk_fixed0: <Fixed clock> on ofwbus0 =
=20
> simplebus0: <Flattened device tree simple bus> on ofwbus0 =
=20
> rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on
> ofwbus0=20
> rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem
> 0xff750000-0xff70
> rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem
> 0xff760000-0xff760fff o0
> rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on
> ofwbus0=20
> clk_fixed1: <Fixed clock> on ofwbus0 =
=20
> regfix0: <Fixed Regulator> on ofwbus0 =
=20
> regfix1: <Fixed Regulator> on ofwbus0 =
=20
> regfix2: <Fixed Regulator> on ofwbus0 =
=20
> regfix3: <Fixed Regulator> on ofwbus0 =
=20
> regfix4: <Fixed Regulator> on ofwbus0 =
=20
> regfix5: <Fixed Regulator> on ofwbus0 =
=20
> regfix6: <Fixed Regulator> on ofwbus0 =
=20
> regfix7: <Fixed Regulator> on ofwbus0 =
=20
> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310=
fff
> on0
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 =
=20
> gic0: <ARM Generic Interrupt Controller v3.0> mem
> 0xfee00000-0xfee0ffff,0xfef000
> its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on
> gic0=20
> rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 =
=20
> gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 65 on
> rk_p0
> gpiobus0: <OFW GPIO bus> on gpio0 =
=20
> gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 66 on
> rk_p0
> gpiobus1: <OFW GPIO bus> on gpio1 =
=20
> gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 67 on
> rk_p0
> gpiobus2: <OFW GPIO bus> on gpio2 =
=20
> gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 68 on
> rk_p0
> gpiobus3: <OFW GPIO bus> on gpio3 =
=20
> gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 69 on
> rk_p0
> gpiobus4: <OFW GPIO bus> on gpio4 =
=20
> rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 =
=20
> iicbus0: <OFW I2C bus> on rk_i2c0 =
=20
> rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 =
=20
> iicbus1: <OFW I2C bus> on rk_i2c1 =
=20
> rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 =
=20
> iicbus2: <OFW I2C bus> on rk_i2c2 =
=20
> syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 =
=20
> rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 =
=20
> iicbus3: <OFW I2C bus> on rk_i2c3 =
=20
> rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 70 on iicbus2 =
=20
> generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 =
=20
> Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 =
=20
> Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 =
=20
> rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_gr=
f1 =20
> rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_gr=
f1 =20
> rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_g=
rf1 =20
> cpulist0: <Open Firmware CPU Group> on ofwbus0 =
=20
> cpu0: <Open Firmware CPU> on cpulist0 =
=20
> cpufreq_dt0: <Generic cpufreq driver> on cpu0 =
=20
> cpu1: <Open Firmware CPU> on cpulist0 =
=20
> cpufreq_dt1: <Generic cpufreq driver> on cpu1 =
=20
> cpu2: <Open Firmware CPU> on cpulist0 =
=20
> cpufreq_dt2: <Generic cpufreq driver> on cpu2 =
=20
> cpu3: <Open Firmware CPU> on cpulist0 =
=20
> cpufreq_dt3: <Generic cpufreq driver> on cpu3 =
=20
> cpu4: <Open Firmware CPU> on cpulist0 =
=20
> cpufreq_dt4: <Generic cpufreq driver> on cpu4 =
=20
> cpu5: <Open Firmware CPU> on cpulist0 =
=20
> cpufreq_dt5: <Generic cpufreq driver> on cpu5 =
=20
> dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xfe300000-0xfe30ffff ir=
q 9
> on0
> miibus0: <MII bus> on dwc0 =
=20
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus=
0 =20
> rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT-FDX, o
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus=
0 =20
> rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
> 1000baseT-FDX, o
> dwc0: Ethernet address: 3e:e5:c3:24:6e:90 =
=20
> rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller
> (RockChip)0
> rockchip_dwmmc0: Hardware version ID is 270a =
=20
> mmc0: <MMC/SD bus> on rockchip_dwmmc0 =
=20
> sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33f=
fff
> ir0
> rk_emmcphy0: got emmcclk clock =
=20
> sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setti=
ng
> BRO.
> sdhci_fdt0: 1 slot(s) allocated =
=20
> mmc1: <MMC/SD bus> on sdhci_fdt0 =
=20
> ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwb=
us0 =20
> ehci0: Could not set phy to host mode =
=20
> panic: lock 0xffff0000413bb140 is not initialized =
=20
> cpuid =3D 0 =
=20
> time =3D 1 =
=20
> KDB: stack backtrace: =
=20
> db_trace_self() at db_trace_self_wrapper+0x28 =
=20
> pc =3D 0xffff00000071e7b8 lr =3D 0xffff000000106224 =
=20
> sp =3D 0xffff000000010530 fp =3D 0xffff000000010740 =
=20
> =
=20
> db_trace_self_wrapper() at vpanic+0x18c =
=20
> pc =3D 0xffff000000106224 lr =3D 0xffff0000003ff2bc =
=20
> sp =3D 0xffff000000010750 fp =3D 0xffff000000010800 =
=20
> =
=20
> vpanic() at panic+0x44 =
=20
> pc =3D 0xffff0000003ff2bc lr =3D 0xffff0000003ff06c =
=20
> sp =3D 0xffff000000010810 fp =3D 0xffff000000010890 =
=20
> =
=20
> panic() at lock_destroy+0x44 =
=20
> pc =3D 0xffff0000003ff06c lr =3D 0xffff000000447ffc =
=20
> sp =3D 0xffff0000000108a0 fp =3D 0xffff0000000108b0 =
=20
> =
=20
> lock_destroy() at usb_bus_mem_free_all+0x34 =
=20
> pc =3D 0xffff000000447ffc lr =3D 0xffff000000288314 =
=20
> sp =3D 0xffff0000000108c0 fp =3D 0xffff0000000108d0 =
=20
> =
=20
> usb_bus_mem_free_all() at generic_ehci_detach+0xb8 =
=20
> pc =3D 0xffff000000288314 lr =3D 0xffff00000075f418 =
=20
> sp =3D 0xffff0000000108e0 fp =3D 0xffff000000010900 =
=20
> =
=20
> generic_ehci_detach() at generic_ehci_fdt_detach+0x1c =
=20
> pc =3D 0xffff00000075f418 lr =3D 0xffff00000075f800 =
=20
> sp =3D 0xffff000000010910 fp =3D 0xffff000000010950 =
=20
> =
=20
> generic_ehci_fdt_detach() at generic_ehci_fdt_attach+0x26c =
=20
> pc =3D 0xffff00000075f800 lr =3D 0xffff00000075f7a0 =
=20
> sp =3D 0xffff000000010960 fp =3D 0xffff0000000109b0 =
=20
> =
=20
> generic_ehci_fdt_attach() at device_attach+0x3ec =
=20
> pc =3D 0xffff00000075f7a0 lr =3D 0xffff000000434d2c =
=20
> sp =3D 0xffff0000000109c0 fp =3D 0xffff000000010a10 =
=20
> =
=20
> device_attach() at device_probe_and_attach+0x7c =
=20
> pc =3D 0xffff000000434d2c lr =3D 0xffff0000004348a8 =
=20
> sp =3D 0xffff000000010a20 fp =3D 0xffff000000010a40 =
=20
> =
=20
> device_probe_and_attach() at bus_generic_new_pass+0xec =
=20
> pc =3D 0xffff0000004348a8 lr =3D 0xffff000000436930 =
=20
> sp =3D 0xffff000000010a50 fp =3D 0xffff000000010a80 =
=20
> =
=20
> bus_generic_new_pass() at bus_generic_new_pass+0xd0 =
=20
> pc =3D 0xffff000000436930 lr =3D 0xffff000000436914 =
=20
> sp =3D 0xffff000000010a90 fp =3D 0xffff000000010ac0 =
=20
> =
=20
> bus_generic_new_pass() at bus_generic_new_pass+0xd0 =
=20
> pc =3D 0xffff000000436914 lr =3D 0xffff000000436914 =
=20
> sp =3D 0xffff000000010ad0 fp =3D 0xffff000000010b00 =
=20
> =
=20
> bus_generic_new_pass() at bus_set_pass+0x8c =
=20
> pc =3D 0xffff000000436914 lr =3D 0xffff000000432408 =
=20
> sp =3D 0xffff000000010b10 fp =3D 0xffff000000010b40 =
=20
> =
=20
> bus_set_pass() at mi_startup+0x238 =
=20
> pc =3D 0xffff000000432408 lr =3D 0xffff000000398ad4 =
=20
> sp =3D 0xffff000000010b50 fp =3D 0xffff000000010bb0 =
=20
> =
=20
> mi_startup() at virtdone+0x54 =
=20
> pc =3D 0xffff000000398ad4 lr =3D 0xffff000000001084 =
=20
> sp =3D 0xffff000000010bc0 fp =3D 0x0000000000000000 =
=20
> =
=20
> KDB: enter: panic =
=20
> [ thread pid 0 tid 100000 ] =
=20
> Stopped at 0 =
=20
> db> help =
=20
> This is ddb(4), the kernel debugger; see https://man.FreeBSD.org/ddb/4 for
> help.
> Use "bt" for backtrace, "dump" for kernel core dump, "reset" to reboot. =
=20
> Available commands: =
=20
> acttrace alltrace b break =
=20
> bt c call capture =
=20
> continue countfreebufs d delete =
=20
> dhwatch dump dwatch examine =
=20
> findstack gdb halt hwatch =
=20
> kill kldstat match next =
=20
> p panic pci_clearerr print =
=20
> ps reboot reset run =
=20
> s script scripts search =
=20
> set show step sysctl =
=20
> t textdump thread trace =
=20
> unscript until w watch =
=20
> watchdog where write x =
=20
> =
=20
> The following have subcommands; append "help" to list (e.g. "show help"):=
=20
> show =
=20
> db>=20
> -----
>=20
> Regards=20
> Klaus
>=20
>=20
>=20
> --
> Sent from: http://freebsd.1045724.x6.nabble.com/freebsd-arm-f4199244.html
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"
--=20
Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20191011125558.00bf845d71c27954d220edf0>