Date: Fri, 20 Feb 2004 09:38:19 +0100 From: Christophe Prevotaux <c.prevotaux@hexanet.fr> To: freebsd-stable@freebsd.org Subject: Re: Via Epia CL10000 and VIA C3 Message-ID: <20040220093819.6050a0d2.c.prevotaux@hexanet.fr> In-Reply-To: <40350580.2070707@natzo.com> References: <20040219102151.181c6b14.c.prevotaux@hexanet.fr> <40350580.2070707@natzo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for the answer In fact I am planning to use it as a router and firewall plus I'd like to run quite a few IPSEC Tunnel at speed between 2Mbps to 80Mbps , I also need use a HiFn card or possible some Intel NICs with 3DES support. On Thu, 19 Feb 2004 13:50:40 -0500 Dany Nativel <dany_list@natzo.com> wrote: > My fileserver is running on a M6000 (pre-CL10000) using FreeBSD 5.2 >=20 > I had some troubles compiling the kernel. The trick was to use : >=20 > - i686 in the kernel config > - i586 in the make file (full 686 compilation cannot be used due to > a missing instruction) >=20 > But in your case I think you processor supports 686 for the > compilation. >=20 > You shouldn't have a problem with 4.9 due to the older gcc (less=20 > options) as far as compilation goes. Now you should check if the > network interface is supported. >=20 > I forgot, are you planning to run X on it ? I didn't hear a lot of > good thing regarding XFree86 support on the CLE266. >=20 > Hope this will help. > Dany >=20 > Christophe Prevotaux wrote: >=20 > >Hello, > > > >I would like to know if FreeBSD 4-STABLE (or 4.9 Release) supports > >the Via Epia CL10000 Motherboard and CPU VIA C3 1Ghz ?=20 > > > >_______________________________________________ > >freebsd-stable@freebsd.org mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-stable > >To unsubscribe, send any mail to > >"freebsd-stable-unsubscribe@freebsd.org" > > =20 > > >=20 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to > "freebsd-stable-unsubscribe@freebsd.org" >=20 -- =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Christophe Prevotaux Email: c.prevotaux@hexanet.fr HEXANET SARL URL: http://www.hexanet.fr/ Z.A.C Les Charmilles Tel: +33 (0)3 26 79 30 05=20 3 All=E9e Thierry Sabine Direct: +33 (0)3 26 61 77 72=20 BP202 Fax: +33 (0)3 26 79 30 06 51686 Reims Cedex 2 =20 FRANCE HEXANET Network Operation Center =20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040220093819.6050a0d2.c.prevotaux>