Date: Sun, 10 May 1998 01:24:15 +0200 (CEST) From: Leif Neland <leifn@internet.dk> Cc: dwhite@resnet.uoregon.edu, freebsd-questions@FreeBSD.ORG Subject: Re: Masking out bad blocks Message-ID: <Pine.BSF.3.96.980510012008.1384A-100000@darla.swimsuit.internet.dk> In-Reply-To: <199805092131.RAA10299@castor.loco.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 9 May 1998, CyberPeasant wrote:
> Doug White wrote:
> > The disk should silently map these bad blocks itself. Make sure that auto
> > relocation is enabled by running
> >
> > scsi -f /dev/rsdX -m 1
> >
> > and verify that AWRE and ARRE are set to 1:
> >
When I do this, I just get:
SCIOCCOMMAND ioctl: Command accepted.
host adapter status 2
Command out (6 of 6):
1a 00 01 00 ff 00
Data in (255 of 255):
13 00 00 08 00 0a 1f b4 00 00 02 00 81 06 20 0a # .............. .
0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # ................
No sense sent.
dmesg:
(just cvsup'ed and made world and kernel)
FreeBSD 2.2.6-STABLE #1: Sat May 9 21:25:38 CEST 1998
root@darla.swimsuit.internet.dk:/usr/src/sys/compile/DARLA
CPU: i486DX (486-class CPU)
aic0 at 0x340-0x35f irq 11 on isa
(aic0:1:0): "MICROP 1684-07MB1036511 AS0C" type 0 fixed SCSI 1
sd0(aic0:1:0): Direct-Access 323MB (663476 512 byte sectors)
(aic0:2:0): "MICROP 1588-15MB1036511 AS0C" type 0 fixed SCSI 1
sd1(aic0:2:0): Direct-Access 636MB (1304052 512 byte sectors)
Leif Neland
leifn@internet.dk
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980510012008.1384A-100000>