Date: Wed, 14 Apr 2004 19:45:09 -0700 From: Rick Updegrove <dislists@updegrove.net> To: freebsd-stable@freebsd.org Subject: Re: 4.9 SMP Stability? Message-ID: <407DF735.7020705@updegrove.net> In-Reply-To: <20040415014851.GA58873@xor.obsecurity.org> References: <407C5AED.9040709@updegrove.net> <407C76A6.5080502@users.sourceforge.net> <407CA3D6.2090803@updegrove.net> <20040414083216.A45296@server.gisp.dk> <407D466E.9060900@updegrove.net> <407DBD39.6020405@updegrove.net> <20040414232312.GA56901@xor.obsecurity.org> <407DCB29.8010109@updegrove.net> <20040415000022.GA57253@xor.obsecurity.org> <407DE32B.8040304@updegrove.net> <20040415014851.GA58873@xor.obsecurity.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------000909040402090508020003
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Ok BIOS is updated.
Sorry for the attachments, but the lines would wrap badly.
Kris Kennaway wrote:
> Run mptable.
See mptable.txt
> Look in /modules for stale files, and check kldstat to see what you're
> running.
See modules.txt
How do I know if they are stale?
root@govmail /modules # kldstat
Id Refs Address Size Name
1 1 0xc0100000 227ff4 kernel
> This doesn't correspond to the recommended upgrade procedure (yes, in
> the handbook :-), e.g. you omit running mergemaster, and run the
> installworld target before rebooting, but that shouldn't cause panics.
Oh I am supposed to reboot first, then run make installworld?
Well I admit that I don't use mergemaster because it has never actually
been useful. I prefer to keep my /etc configuration files in CVS and
refer to them if something breaks.. perhaps I should RTFM again and again?
> It will, however, cause you to destroy your system if you attempted to
> use that method to update to 5.x ;-)
Good to know.
>>>You said the machine panicked.
>>
>>I said the machine reboots without any warning and without leaving
>>anything useful in any of the logs.
>
>
> Are you sure that nothing is displayed on the system console before it
> reboots? Hooking up a serial console can be a good way to catch this.
I am not sure because I am always on a shell via openssh and the server
is in the freezing cold server room.
I will try to hook up a serial console can you point me to a HOWTO
maybe? I will also google...
> man boot and see the 'v' option.
I hate man pages sometimes. After reading that several times, I took a
guess and I am trying:
##############################################################
### Basic configuration options ############################
##############################################################
exec=".( Loading /boot/defaults/loader.conf ) cr"
kernel="/kernel"
kernel_options="-v" <== CHANGED
userconfig_script_load="NO"
userconfig_script_name="/boot/kernel.conf"
userconfig_script_type="userconfig_script"
loader_conf_files="/boot/device.hints /boot/loader.conf
/boot/loader.conf.local /boot/nextboot.conf"
verbose_loading="YES" <== CHANGED
Does that look OK?
> This indicates a problem - I don't know how serious - the BIOS update
> may help.
I am attaching the output from "dmesg -a" again after booting to the new
BIOS and making the above changes.
See dmesg.txt
> Also, buggy firmware on raid controllers can cause problems. Also try
> updating that.
Ok but not until I make it crash with this BIOS right?
--------------000909040402090508020003
Content-Type: text/plain;
name="mptable.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="mptable.txt"
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f69b0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x3e
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009f960
signature: 'PCMP'
base table length: 308
version: 1.4
checksum: 0x50
OEM ID: 'HP '
Product ID: 'LH 3 '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 30
local APIC address: 0xfee00000
extended table length: 144
extended table checksum: 105
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
1 0x11 BSP, usable 6 7 3 0x387fbff
0 0x11 AP, usable 6 7 3 0x387fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 3 0 2 0
INT active-hi edge 3 1 2 1
INT active-hi edge 3 0 2 2
INT active-hi edge 3 3 2 3
INT active-hi edge 3 4 2 4
INT active-hi edge 3 5 2 5
INT active-hi edge 3 6 2 6
INT active-lo level 3 7 2 7
INT active-hi edge 3 8 2 8
INT active-lo level 3 9 2 9
INT active-lo level 3 10 2 10
INT active-lo level 3 11 2 11
INT active-hi edge 3 12 2 12
INT active-hi edge 3 13 2 13
INT active-hi edge 3 14 2 14
INT active-hi edge 3 15 2 15
INT active-lo level 0 4:D 2 19
INT active-lo level 0 7:A 2 17
INT active-lo level 1 4:A 2 16
INT active-lo level 1 7:A 2 18
INT active-lo level 2 2:A 2 17
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 3 0 255 0
NMI active-hi edge 0 0:A 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x20000000
address range: 0xcff00000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0xeff00000
address range: 0xe100000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfe000000
address range: 0x2000000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xd8000
address range: 0x10000
--
Bus Heirarchy
bus ID: 3 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
===============================================================================
--------------000909040402090508020003
Content-Type: text/plain;
name="modules.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="modules.txt"
[0m[01;32maac.ko[0m
[01;32maac_linux.ko[0m
[01;32maccf_data.ko[0m
[01;32maccf_http.ko[0m
[01;32magp.ko[0m
[01;32maha.ko[0m
[01;32mamr.ko[0m
[01;32mapm_saver.ko[0m
[01;32masr.ko[0m
[01;32mbktr.ko[0m
[01;32mbktr_mem.ko[0m
[01;32mblank_saver.ko[0m
[01;32mbridge.ko[0m
[01;32mcam.ko[0m
[01;32mccd.ko[0m
[01;32mcd9660.ko[0m
[01;32mciss.ko[0m
[01;32mcoda.ko[0m
[01;32mcrypto.ko[0m
[01;32mcryptodev.ko[0m
[01;32mdaemon_saver.ko[0m
[01;32mdcons.ko[0m
[01;32mdcons_crom.ko[0m
[01;32mdragon_saver.ko[0m
[01;32mdummynet.ko[0m
[01;32mext2fs.ko[0m
[01;32mfade_saver.ko[0m
[01;32mfdesc.ko[0m
[01;32mfire_saver.ko[0m
[01;32mfirewire.ko[0m
[01;32mfpu.ko[0m
[01;32mgnufpu.ko[0m
[01;32mgreen_saver.ko[0m
[01;32mhifn.ko[0m
[01;32mibcs2.ko[0m
[01;32mibcs2_coff.ko[0m
[01;32mida.ko[0m
[01;32mif_an.ko[0m
[01;32mif_ar.ko[0m
[01;32mif_aue.ko[0m
[01;32mif_bfe.ko[0m
[01;32mif_bge.ko[0m
[01;32mif_cue.ko[0m
[01;32mif_dc.ko[0m
[01;32mif_disc.ko[0m
[01;32mif_ed.ko[0m
[01;32mif_ef.ko[0m
[01;32mif_em.ko[0m
[01;32mif_faith.ko[0m
[01;32mif_fwe.ko[0m
[01;32mif_fxp.ko[0m
[01;32mif_gif.ko[0m
[01;32mif_gre.ko[0m
[01;32mif_gx.ko[0m
[01;32mif_kue.ko[0m
[01;32mif_lge.ko[0m
[01;32mif_my.ko[0m
[01;32mif_nge.ko[0m
[01;32mif_pcn.ko[0m
[01;32mif_ppp.ko[0m
[01;32mif_ray.ko[0m
[01;32mif_rl.ko[0m
[01;32mif_rue.ko[0m
[01;32mif_sbni.ko[0m
[01;32mif_sbsh.ko[0m
[01;32mif_sf.ko[0m
[01;32mif_sis.ko[0m
[01;32mif_sk.ko[0m
[01;32mif_sl.ko[0m
[01;32mif_sr.ko[0m
[01;32mif_ste.ko[0m
[01;32mif_stf.ko[0m
[01;32mif_tap.ko[0m
[01;32mif_ti.ko[0m
[01;32mif_tl.ko[0m
[01;32mif_tun.ko[0m
[01;32mif_txp.ko[0m
[01;32mif_vlan.ko[0m
[01;32mif_vr.ko[0m
[01;32mif_wb.ko[0m
[01;32mif_wi.ko[0m
[01;32mif_wx.ko[0m
[01;32mif_xe.ko[0m
[01;32mif_xl.ko[0m
[01;32miir.ko[0m
[01;32mip6fw.ko[0m
[01;32mipfw.ko[0m
[01;32mipl.ko[0m
[01;32mispfw.ko[0m
[01;32mjoy.ko[0m
[01;32mlibiconv.ko[0m
[01;32mlibmchain.ko[0m
[01;32mlinprocfs.ko[0m
[01;32mlinux.ko[0m
[01;32mlogo_saver.ko[0m
[01;32mmd.ko[0m
[01;32mmfs.ko[0m
[01;32mmiibus.ko[0m
[01;32mmlx.ko[0m
[01;32mmly.ko[0m
[0mmodules.txt[0m
[01;32mmsdos.ko[0m
[01;32mncp.ko[0m
[01;32mncv.ko[0m
[01;32mnetgraph.ko[0m
[01;32mnfs.ko[0m
[01;32mng_UI.ko[0m
[01;32mng_async.ko[0m
[01;32mng_bpf.ko[0m
[01;32mng_bridge.ko[0m
[01;32mng_cisco.ko[0m
[01;32mng_echo.ko[0m
[01;32mng_eiface.ko[0m
[01;32mng_etf.ko[0m
[01;32mng_ether.ko[0m
[01;32mng_frame_relay.ko[0m
[01;32mng_hole.ko[0m
[01;32mng_iface.ko[0m
[01;32mng_ksocket.ko[0m
[01;32mng_l2tp.ko[0m
[01;32mng_lmi.ko[0m
[01;32mng_mppc.ko[0m
[01;32mng_one2many.ko[0m
[01;32mng_ppp.ko[0m
[01;32mng_pppoe.ko[0m
[01;32mng_pptpgre.ko[0m
[01;32mng_rfc1490.ko[0m
[01;32mng_socket.ko[0m
[01;32mng_sync_ar.ko[0m
[01;32mng_sync_sr.ko[0m
[01;32mng_tee.ko[0m
[01;32mng_tty.ko[0m
[01;32mng_vjc.ko[0m
[01;32mng_vlan.ko[0m
[01;32mnmdm.ko[0m
[01;32mnsp.ko[0m
[01;32mntfs.ko[0m
[01;32mnull.ko[0m
[01;32mnwfs.ko[0m
[01;32mportal.ko[0m
[01;32mprocfs.ko[0m
[01;32mpst.ko[0m
[01;32mrain_saver.ko[0m
[01;32mrp.ko[0m
[01;32msafe.ko[0m
[01;32msbp.ko[0m
[01;32msbp_targ.ko[0m
[01;32mscsi_low.ko[0m
[01;32msmbfs.ko[0m
[01;32msnake_saver.ko[0m
[01;32msnd.ko[0m
[01;32msnd_ad1816.ko[0m
[01;32msnd_als4000.ko[0m
[01;32msnd_cmi.ko[0m
[01;32msnd_cs4281.ko[0m
[01;32msnd_csa.ko[0m
[01;32msnd_ds1.ko[0m
[01;32msnd_emu10k1.ko[0m
[01;32msnd_es137x.ko[0m
[01;32msnd_ess.ko[0m
[01;32msnd_fm801.ko[0m
[01;32msnd_ich.ko[0m
[01;32msnd_maestro.ko[0m
[01;32msnd_maestro3.ko[0m
[01;32msnd_mss.ko[0m
[01;32msnd_neomagic.ko[0m
[01;32msnd_pcm.ko[0m
[01;32msnd_sb16.ko[0m
[01;32msnd_sb8.ko[0m
[01;32msnd_sbc.ko[0m
[01;32msnd_solo.ko[0m
[01;32msnd_t4dwave.ko[0m
[01;32msnd_uaudio.ko[0m
[01;32msnd_via8233.ko[0m
[01;32msnd_via82c686.ko[0m
[01;32msnd_vibes.ko[0m
[01;32msnp.ko[0m
[01;32msplash_bmp.ko[0m
[01;32msplash_pcx.ko[0m
[01;32msppp.ko[0m
[01;32mstar_saver.ko[0m
[01;32mstg.ko[0m
[01;32mstreams.ko[0m
[01;32msvr4.ko[0m
[01;32mtrm.ko[0m
[01;32mtwa.ko[0m
[01;32mtwe.ko[0m
[01;32mubsa.ko[0m
[01;32mubsec.ko[0m
[01;32mucom.ko[0m
[01;32mufm.ko[0m
[01;32muftdi.ko[0m
[01;32mugen.ko[0m
[01;32muhid.ko[0m
[01;32mukbd.ko[0m
[01;32mulpt.ko[0m
[01;32mumap.ko[0m
[01;32mumass.ko[0m
[01;32mumct.ko[0m
[01;32mumodem.ko[0m
[01;32mums.ko[0m
[01;32munion.ko[0m
[01;32muplcom.ko[0m
[01;32musb.ko[0m
[01;32muscanner.ko[0m
[01;32muvisor.ko[0m
[01;32muvscom.ko[0m
[01;32mvesa.ko[0m
[01;32mvinum.ko[0m
[01;32mvn.ko[0m
[01;32mvpo.ko[0m
[01;32mwarp_saver.ko[0m
[m
--------------000909040402090508020003
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="dmesg.txt"
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.10-BETA #0: Tue Apr 13 21:49:08 PDT 2004
root@govmail.ca.gov:/usr/obj/usr/src/sys/SMP
Calibrating clock(s) ... TSC clock: 499149470 Hz, i8254 clock: 1193186 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (499.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x000353000 - 0x01fff7fff, 533352448 bytes (130213 pages)
avail memory = 519507968 (507332K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00f69f0
bios32: Entry = 0xfd7ca (c00fd7ca) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x4d7
pnpbios: Found PnP BIOS data at 0xc00f69c0
pnpbios: Entry = f0000:a987 Rev = 1.0
pnpbios: OEM ID 1c2f022
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0329000.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80003964
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
Using $PIR table, 14 entries at 0xc00fdee0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
found-> vendor=0x8086, dev=0x7192, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00000000, size 28
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000fcd0, size 4
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=2
map[20]: type 1, range 32, base 0000fce0, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00002180, size 4
found-> vendor=0x8086, dev=0x0960, revid=0x05
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=1 secondarybus=1
IOAPIC #0 intpin 17 -> irq 16
Freeing (NOT implemented) redirected PCI irq 9.
found-> vendor=0x8086, dev=0x1960, revid=0x05
class=0e-00-01, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=16
map[10]: type 1, range 32, base f0000000, size 27
found-> vendor=0x1011, dev=0x0024, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=2 secondarybus=2
found-> vendor=0x103c, dev=0x10c1, revid=0xa0
class=08-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fedf8000, size 15
found-> vendor=0x1013, dev=0x00b8, revid=0x45
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fc000000, size 25
map[14]: type 1, range 32, base fedf7000, size 12
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcd0
ata0: mask=03 ostat0=50 ostat2=01
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=00 stat1=01
ata0: devices=0c
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcd8
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 4.2 irq 2
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x2180-0x218f at device 4.3 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=0960)> at device 7.0 on pci0
IOAPIC #0 intpin 16 -> irq 17
Freeing (NOT implemented) redirected PCI irq 7.
found-> vendor=0x9004, dev=0x8178, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=17
map[10]: type 1, range 32, base 0000e800, size 8
map[14]: type 1, range 32, base febfe000, size 12
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x1000, dev=0x000c, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=18
map[10]: type 1, range 32, base 0000e400, size 8
map[14]: type 1, range 32, base febff800, size 8
map[18]: type 1, range 32, base febfd000, size 12
pci1: <PCI bus> on pcib1
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xfebfe000-0xfebfefff irq 17 at device 4.0 on pci1
ahc0: Defaulting to MEMIO off
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable not present
ahc0: external cable not present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: Low byte termination Enabled
ahc0: Downloading Sequencer Program... 449 instructions downloaded
ahc0: Features 0x10005, Bugs 0x25, Flags 0x20481540
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci1: <unknown card> (vendor=0x1000, dev=0x000c) at 7.0 irq 18
amr0: <LSILogic MegaRAID> mem 0xf0000000-0xf7ffffff irq 16 at device 7.1 on pci0
amr0: <Integrated HP NetRAID (T5)> Firmware D.02.05, BIOS B.01.04, 16MB RAM
pcib2: <DEC 21152 PCI-PCI bridge> at device 8.0 on pci0
Freeing (NOT implemented) redirected PCI irq 9.
found-> vendor=0x8086, dev=0x1229, revid=0x05
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=16
map[10]: type 1, range 32, base efffe000, size 12
map[14]: type 1, range 32, base 0000dce0, size 5
map[18]: type 1, range 32, base fe900000, size 20
pci2: <PCI bus> on pcib2
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xdce0-0xdcff mem 0xfe900000-0xfe9fffff,0xefffe000-0xefffefff irq 16 at device 2.0 on pci2
fxp0: using memory space register mapping
using shared irq16.
fxp0: Ethernet address 00:90:27:b7:09:76
fxp0: PCI IDs: 8086 1229 103c 10c3 0005
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x103c, dev=0x10c1) at 11.0
pci0: <Cirrus Logic GD5446 SVGA controller> (vendor=0x1013, dev=0x00b8) at 13.0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc8fff,0xc9000-0xc97ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x4041 0x4051 0x4041 0x4041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x4041 0x4041 0x4041 0x4041
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 4, 6, 12, 14, 15, 16, 17, apic_imen: 0x00fc2fad
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ata0-slave: ATAPI identify retries exceeded
ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-master: success setting PIO4 on generic chip
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
acd0: <CD-532E-B/2.1A> CDROM drive at ata0 as master
acd0: read 5512KB/s (3271KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34708MB (71081984 sectors) RAID 5 (optimal)
Creating DISK amrd0
Mounting root from ufs:/dev/amrd0s1a
amrd0s1: type 0xa5, start 63, end = 71071559, size 71071497 : OK
start_init: trying /sbin/init
dumpon: crash dumps to /dev/amrd0s1b (133, 131073)
swapon: adding /dev/amrd0s1b as swap device
Automatic boot in progress...
/dev/amrd0s1a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1a:
clean, 17479 free
(239 frags, 2155 blocks, 0.4% fragmentation)
/dev/amrd0s1f:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1f:
clean, 108490 free
(322 frags, 13521 blocks, 0.2% fragmentation)
/dev/amrd0s1g:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1g:
clean, 11798110 free
(393086 frags, 1425628 blocks, 2.4% fragmentation)
/dev/amrd0s1e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/amrd0s1e:
clean, 314347 free
(21563 frags, 36598 blocks, 4.2% fragmentation)
Doing initial network setup:
hostname
.
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 134.186.104.10 netmask 0xffffff00 broadcast 134.186.104.255
ether 00:90:27:b7:09:76
media: Ethernet 100baseTX <full-duplex>
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 134.186.104.62
Additional routing options:
TCP keepalive=YES
.
Routing daemons:
.
Additional daemons:
syslogd
.
Checking for core dump:
savecore: no core dump
Doing additional network setup:
.
Starting final network daemons:
.
ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting standard daemons:
cron
sshd
.
Initial rc.i386 initialization:
.
Configuring syscons:
blanktime
.
Additional ABI support:
.
Starting local daemons:
starting svscan in /service
[1] 96
.
Local package initialization:
[Wed Apr 14 19:34:10 2004] [warn] Loaded DSO libexec/apache/libphp4.so uses plain Apache 1.3 API, this module might crash under EAPI! (please recompile it with -DEAPI)
apache
Starting clamd
mysqld
(skipping samba.sh, not executable)
Starting spamd
sqwebmaild
svscan
.
Additional TCP options:
.
Wed Apr 14 19:34:12 PDT 2004
Apr 14 19:36:59 govmail sshd[647]: error: PAM: Authentication failure
--------------000909040402090508020003--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?407DF735.7020705>