Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 24 Jan 1999 20:53:19 -0800 (PST)
From:      Matthew Dillon <dillon@apollo.backplane.com>
To:        Lee Cremeans <lee@st-lcremean.tidalwave.net>
Cc:        current@FreeBSD.ORG
Subject:   Re: IDE DMA works, I'll be a...
Message-ID:  <199901250453.UAA00799@apollo.backplane.com>
References:  <199901250419.UAA00493@apollo.backplane.com> <19990124232542.A1754@tidalwave.net> <199901250434.UAA00625@apollo.backplane.com> <19990124233749.A1816@tidalwave.net>

next in thread | previous in thread | raw e-mail | index | archive | help

:>     I haven't cvs updated in 24 hours, if the Acer is newly committed then I'll
:>     have to update again and retry.  The CTX is using the Acer.
:> 
:> ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0x20 int a irq 0 on pci0.11.0
:             ^^^^^^^^^^^^^^^^^^^^^^^^
:
:It's there...what symptoms are you seeing? Are you overclocking?
:-- 
:+--------------------------------------------------------------------+
:| Lee Cremeans -- Manassas, VA, USA  (WakkyMouse on DALnet and WTnet)|  


    No overclocking.  Stock CTX box.  Could it be the drive, maybe?

    I only get 2.4 MBytes/sec, same as before.  On my PPro box ( Intel
    PIIX3 Bus-master IDE controller ) it went from around 2.4 MB/sec
    to 8 MBytes/sec.

    archive:/cvs# time dd if=/dev/zero of=test2 bs=32k count=1024
    1024+0 records in
    1024+0 records out
    33554432 bytes transferred in 13.700387 secs (2449159 bytes/sec)
    0.000u 2.728s 0:13.75 19.7%     357+1405k 5+525io 1pf+0w


					-Matt
					Matthew Dillon 
					<dillon@backplane.com>

ide_pci0: <Acer Aladdin IV/V (M5229) Bus-master IDE controller> rev 0x20 int a irq 0 on pci0.11.0
wdc0 at 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa
wdc0: unit 0 (wd0): <QUANTUM Bigfoot TX4.0AT>, 32-bit, multi-block-16
wd0: 3832MB (7849170 sectors), 8306 cyls, 15 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 flags 0xa0ffa0ff on isa
wdc1: unit 0 (atapi): <ATAPI CDROM/V1.70>, removable, dma, iordy


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199901250453.UAA00799>