Date: Sat, 12 Jul 2003 18:42:09 +0300 From: "NiC" <nic@x-zone.lv> To: "Laszlo Vagner" <george@vagner.com> Cc: freebsd-questions@freebsd.org Subject: Re: Can't make "label" for a new HDD Message-ID: <004701c3488c$2860ce00$0100a8c0@nic> References: <002d01c34863$9965e5a0$0100a8c0@nic> <3F1029B5.9090109@vagner.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Sorry, did not work :( Nikolay ----- Original Message ----- From: "Laszlo Vagner" <george@vagner.com> To: "NiC" <nic@x-zone.lv> Cc: <freebsd-questions@freebsd.org> Sent: Saturday, July 12, 2003 6:31 PM Subject: Re: Can't make "label" for a new HDD > NiC wrote: > > >Hi all! > > > >Have trouble - new computer, must be FreeBSD4.8 > >2 HDDs - first is 20Gb, second 200Gb > > > >When installing - all ok. > > > >After rebooting tried to do through /stand/sysinstall -> Fdisk -> selecting 200Gb HDD ->a->w->q > > > >Then "Label" menu->c->selecting maximum volume->selecting mount point "/base->w->shows the error "Error mounting /dev/ad2s1e on /base : Device not configured" > > > >What I'm doing wrong? > > > >Please help. > > > >Regards, > >Nikolay > >_______________________________________________ > >freebsd-questions@freebsd.org mailing list > >http://lists.freebsd.org/mailman/listinfo/freebsd-questions > >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > > > > > > > > > one thing i noticed was that after you create a partition (fdisk) the drive > you have to reboot (power off) for the drive to reread the new partition > and then the disklabel will work. Maybe it is because when freebsd boots > up it didnt see > a valid partition on the drive so it was not configured at boot time. > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004701c3488c$2860ce00$0100a8c0>