Date: Sat, 6 Jan 2001 11:46:38 +0100 From: <marchart@schotten.at> To: <freebsd-questions@freebsd.org> Subject: FreeBSD 4.2 vs LINUX (qmail) Message-ID: <004d01c077cd$f280c420$1a37743e@it4you.at>
next in thread | raw e-mail | index | archive | help
Hi!
Delivery of 200 local emails:
FreeBSD 4.2: 300 Sec
FreeBSD 4.0: 70 Sec
SuSE Linux : 6 Sec
# /var/qmail/bin/qmail-qstat
messages in queue: 196
messages in queue but not yet preprocessed: 88
/var/qmail/lock/trigger has the right permission settings!
I'm sure something is wrong with *MY* FreeBSD Setup!!!!!!
Any ideas? Thank you in advance!
joe
output of my disklabel:
# /dev/ad0c:
type: ESDI
disk: ad0s1
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 255
sectors/cylinder: 16065
cylinders: 1866
sectors/unit: 29993292
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 2048000 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 127*)
b: 1228800 2048000 swap # (Cyl. 127*- 203*)
c: 29993292 0 unused 0 0 # (Cyl. 0 -
1866*)
e: 12288000 3276800 4.2BSD 1024 8192 16 # (Cyl. 203*- 968*)
f: 4096000 15564800 4.2BSD 1024 8192 16 # (Cyl. 968*-
1223*)
g: 10332492 19660800 4.2BSD 1024 8192 16 # (Cyl. 1223*-
1866*)
dmesg:
FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (700.03-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x621 Stepping = 1
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 134201344 (131056K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 126373888 (123412K bytes)
Preloaded elf kernel "kernel" at 0xc0436000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc043609c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Mach64-GD graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
chip2: <VIA 82C686 AC97 Audio> port
0xa000-0xa003,0xa400-0xa403,0xa800-0xa8ff irq 10 at device 4.5 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0x9400-0x94ff mem
0xe1800000-0xe18000ff irq 5 at device 13.0 on pci0
rl0: Ethernet address: 00:00:21:f8:d0:70
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 14649MB <IBM-DTLA-307015> [29765/16/63] at ata0-master UDMA66
acd0: CDROM <ASUS CD-S400/A> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004d01c077cd$f280c420$1a37743e>