Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 30 Oct 2008 19:26:56 +0900
From:      Pyun YongHyeon <pyunyh@gmail.com>
To:        Milan Obuch <freebsd-net@dino.sk>
Cc:        freebsd-net@freebsd.org
Subject:   Re: re weird bug
Message-ID:  <20081030102656.GD78796@cdnetworks.co.kr>
In-Reply-To: <200810300829.35980.freebsd-net@dino.sk>
References:  <200810300829.35980.freebsd-net@dino.sk>

next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Oct 30, 2008 at 08:29:35AM +0100, Milan Obuch wrote:
 > Hi,
 > yesterday I csup'ped my 8-current sources on my MSI Wind netbook (again) and 
 > tried to build new kernel. There is again a problem with re interface. It 
 > just does not work, with following
 > 
 > re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0xc000-0xc0ff mem 
 > 0xffd10000-0xffd10fff,0xffd00000-0xffd0ffff irq 16 at device 0.0 on pci1
 > re0: Chip rev. 0x34800000
 > re0: MAC rev. 0x00200000
 > re0: PHY write failed
 > re0: PHY write failed
 > re0: MII without any phy!
 > device_attach: re0 attach returned 6
 > 
 > in dmesg. This happened already some time ago, but I did not investigate it, 
 > just reverted to older kernel and later it disappeared. Today I found there 
 > is some timing issue or racing condition - when I boot with verbose message 
 > logging, it works with expected
 > 
 > re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0xc000-0xc0ff mem 
 > 0xffd10000-0xffd10fff,0xffd00000-0xffd0ffff irq 16 at device 0.0 on pci1
 > re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xffd10000
 > re0: MSI count : 1
 > re0: Chip rev. 0x34800000
 > re0: MAC rev. 0x00200000
 > miibus0: <MII bus> on re0
 > rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
 > rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > re0: bpf attached
 > re0: Ethernet address: 00:1d:92:59:f5:8b
 > re0: [MPSAFE]
 > re0: [FILTER]
 > 
 > So I think some issue could be in miibus or rlphy code.
 > I am using stripped down kernel with no interfaces, I kldload if_re (and 
 > miibus as dependency), if that matters.
 > Has anybody an idea or patch to test? Something similar appeared recently on 
 > list, but I would like to get issue commented first (maybe with a pointer to 
 > patch).
 > 

That's known issue for newer RealTek PCIe controllers. Would you
please try the patch at the following URL?
http://people.freebsd.org/~yongari/re/re.ephy.patch.20081021

Since it's not easy to reproduce this issue please make sure to
(cold and warm) reboot several times until you can put confidence
in the patch.

-- 
Regards,
Pyun YongHyeon



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081030102656.GD78796>