Date: Sat, 19 Oct 2002 04:57:27 -0500 From: Josh Paetzel <friar_josh@webwarrior.net> To: David Loszewski <stealth215@attbi.com> Cc: freebsd-questions@freebsd.org Subject: Re: problem with network cards in server, plz help! Message-ID: <20021019095727.GA14918@ns1.webwarrior.net> In-Reply-To: <3DB1544C.7060708@attbi.com> References: <3DB1544C.7060708@attbi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Oct 19, 2002 at 07:47:08AM -0500, David Loszewski wrote: > I have two different cards on my Netfinity 5000 server, a pci Netgear > FA311 (showing up as a NatSemi (sis0), and the onboard network card > which seems to have an AMD chipset (pcn0). If I have the onboard > ethernet card enabled at all and have an active cable connected to it > and restart the computer it comes up on ukphy0, turns the pci error > light on and I get no internet access which it later makes the computer > reboot automatically without any warning. If I disable that card and > put in a PCI Netgear card, have also tried other cards such as Intel or > IBM cards, once in a while it will boot normally but every once in a > while it will get hung up on the ukphy0 as well, giving me the same > problem as the onboard network and reboot itself. At first I thought it > was an IRQ problem but all of my devices now have individual IRQ's set > in the bios and I'm still having this problem. I'm afraid to reboot > this thing because I'm afraid it won't be coming back up. Below are > from my dmesg, the first is when I have my onboard ethernet enabled and > the second is when I have the netgear installed. Any help would be much > appreciated on what to do with this problem. By the way....I'm running > on FreeBSD 4.6.2 but also have this problem running 4.7, I it also > usually hangs on the driver initialization during installation of the os. > > Dave > > Oct 4 21:11:36 hermes /kernel: pcn0: <AMD PCnet/PCI 10/100BaseTX> port > 0x2180-0 > x219f mem 0xfebfdc00-0xfebfdc1f irq 10 at device 9.0 on pci0 > Oct 4 21:11:36 hermes /kernel: pcn0: Ethernet address: 00:06:29:39:bf:a9 > Oct 4 21:11:36 hermes /kernel: miibus0: <MII bus> on pcn0 > Oct 4 21:11:36 hermes /kernel: ukphy0: <Generic IEEE 802.3u media > interface> on > miibus0 > Oct 4 21:11:36 hermes /kernel: ukphy0: 10baseT, 10baseT-FDX, > 100baseTX, 100bas > eTX-FDX, auto > > > pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard > pci1: <PCI bus> on pcib1 > sis0: <NatSemi DP83815 10/100BaseTX> port 0x4b00-0x4bff mem > 0xc0fdf000-0xc0fdffff irq 5 at device 4.0 on pci1 > sis0: Ethernet address: 00:a0:cc:76:d9:f1 > miibus0: <MII bus> on sis0 > ukphy0: <Generic IEEE 802.3u media interface> on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > Do you have the Plug N Play OS option in the BIOS turned off? If it isn't, set it to NO or OFF as the case may be and try again. Josh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021019095727.GA14918>