Date: Mon, 6 Mar 2006 10:18:25 -0500 From: Vivek Khera <vivek@khera.org> To: stable@freebsd.org Subject: Re: RELENG_6: serial console drops back from 115200 to 9600 baud Message-ID: <F62095EB-C244-4128-8FAA-41AC29D3FCF2@khera.org> In-Reply-To: <20060227172937.GA62421@sandvine.com> References: <200602260156.aa34941@nowhere.iedowse.com> <440200F2.9010106@andric.com> <20060227083820.GK42677@ip.net.ua> <6eb82e0602270901n703ac969g5c4af69f1563317@mail.gmail.com> <20060227172937.GA62421@sandvine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Feb 27, 2006, at 12:29 PM, Ed Maste wrote: > Probably the "best" way is now -S in boot.config, since it means that > you don't have to recompile and you only have to change it in one > place. > I'm not having any luck getting my 115200 baud serial console back. The machine was upgraded from 5.4-STABLE to 6.1-PRE last week, and again over the weekend. I did the following: make buildworld and buildkernel with BOOT_COMCONSOLE_SPEED=115200 in / etc/make.conf, options CONSPEED=115200 in the kernel config. make installkernel, reboot, yada yada yada, installworld,.. then boot0cfg -B aacd0 to update the boot blocks. Now, at this point I expected to have a 115200 console on the next boot. Nope. Got 9600 baud again. The other side-effect is now I get this stupid "Boot F1 for DOS and F2 for FreeBSD" menu which defaults to DOS (which is the Dell utility partition). How do I get back to the original boot style where it just boots freebsd without any menu? So I updated my /boot.config to read: -Dh -S115200 now on boot, the boot0 drops to the prompt and makes me type in "/ boot/loader" to continue the process. It is as if it forgot what file to load, and ignores the -S option anyhow, because I still end up with a 9600 baud console. I ran out of time to try setting the speed in /boot/loader.conf but I'm not expecting any miracles.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F62095EB-C244-4128-8FAA-41AC29D3FCF2>